• 품질경영학회지
• /
• 제20권1호
• /
• pp.1-10
• /
• 1992

When we compare different control charting schemes, the average run length of each control chart is usually used. The use of the average run length implies that there is unbounded number of samples or observations. The regression recursive residuals, however, have been applied to the cumulative sum chart to detect whether the mean or variance changes. To implement choice of decision interval, we calculate the probability that certain fixed number of control statistics stay in the in-control state. This probability can be used as the significance level of a test for detecting the change in the residual mean or variance of the data with a finite number of observations.

• 응용통계연구
• /
• 제34권5호
• /
• pp.735-744
• /
• 2021

제품의 수명을 유지시키는 것은 품질관리의 주요 목표 중 하나이다. 실제 공정에서는 시간 및 비용의 문제로 인해 모든 표본의 수명을 측정할 수 없는 경우가 많이 발생하기 때문에, 대부분 중도절단된 자료를 포함시켜 표본을 구성한다. 이 논문에서는 제1형의 우측중도절단된 수명 자료가 로그정규분포를 따르는 경우, 제품 수명의 평균을 모니터링하는 두 가지 누적합 관리도 절차를 제안한다. 하나는 우도비에 기초한 누적합 관리도이고, 다른 하나는 이항분포에 기초한 누적합 관리도 절차이다. 모의실험을 통해 평균런길이를 비교하는 방법으로 제안된 두 관리도 절차의 성능을 비교하였다. 모의실험 결과, 중도절단율이 낮은 경우, 형상모수값이 작은 경우, 평균의 감소 변화량이 큰 경우에는 우도비 누적합 관리도가 더 효율적이며, 반대로 중도절단율이 높은 경우, 형상모수값이 큰 경우, 평균의 감소 변화량이 적은 경우에는 이항 누적합 관리도가 더 효율적인 것으로 나타났다.

• 대한산업공학회지
• /
• 제33권4호
• /
• pp.457-468
• /
• 2007

This paper proposes an adaptive moving average (A-MA) control chart with variable sampling intervals (VSI) for detecting shifts in the process mean. The basic idea of the VSI A-MA chart is to adjust sampling intervals as well as to accumulate previous samples selectively in order to increase the sensitivity. The VSI A-MA chart employs a threshold limit to determine whether or not to increase sampling rate as well as to accumulate previous samples. If a standardized control statistic falls outside the threshold limit, the next sample is taken with higher sampling rate and is accumulated to calculate the next control statistic. If the control statistic falls within the threshold limit, the next sample is taken with lower sampling rate and only the sample is used to get the control statistic. The VSI A-MA chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L-consecutive control statistics fall outside the threshold limit. The control length L is introduced to prevent small mean shifts from being undetected for a long period. A Markov chain model is employed to investigate the VSI A-MA sampling process. Formulae related to the steady state average time-to signal (ATS) for an in-control state and out-of-control state are derived in closed forms. A statistical design procedure for the VSI A-MA chart is proposed. Comparative studies show that the proposed VSI A-MA chart is uniformly superior to the adaptive Cumulative sum (CUSUM) chart and to the Exponentially Weighted Moving Average (EWMA) chart, and is comparable to the variable sampling size (VSS) VSI EWMA chart with respect to the ATS performance.

• 한국산업정보학회논문지
• /
• 제1권1호
• /
• pp.111-125
• /
• 1996

This paper presents a statistical process control(SPC) system in the electronic parts manufacturing process. In this system, an SPC method is integrated into the automated inspection technology on a real time base. It shows how the collected data can be analyzed with the SPC to provide process information. also presented are stuided of subpixel image processing technology to improve the accuracy of parts mearements , and the cumulative-sum(CUSUM) control chart for fraction defectives.An application of the developed system to connector manufacturing process as a part of computer integrated manufacturing (CIM) is presented.

• 산업경영시스템학회지
• /
• 제35권3호
• /
• pp.52-61
• /
• 2012

The design method for cumulative sum (CUSUM) control charts, which can be robust to autoregressive moving average (ARMA) modeling errors, has not been frequently proposed so far. This is because the CUSUM statistic involves a maximum function, which is intractable in mathematical derivations, and thus any modification on the statistic can not be favorably made. We propose residual-based robust CUSUM control charts for monitoring autocorrelated processes. In order to incorporate the effects of ARMA modeling errors into the design method, we modify parameters (reference value and decision interval) of CUSUM control charts using the approximate expected variance of residuals generated in model uncertainty, rather than directly modify the form of the CUSUM statistic. The expected variance of residuals is derived using a second-order Taylor approximation and the general form is represented using the order of ARMA models with the sample size for ARMA modeling. Based on the Monte carlo simulation, we demonstrate that the proposed method can be effectively used for statistical process control (SPC) charts, which are robust to ARMA modeling errors.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.11-14
• /
• 1996

Performance of the group cumulative sum(CUSUM) control scheme using multiple univariate CUSUM charts is more sensitive to the change of quality control(QC) characteristics than the control chart scheme based on the Hotelling statistics. We examine three group charts for multivariate normal data sets simulated with various correlation structures and shift directions in the mean vector. These group schemes apply the orginal measurement vectors, the scaled residual vectors from the regression of each variable on all others and the principal component vectors respectively to calculating the CUSUM statistics. They are also compared to the multivariate QC charts based on the Hotelling statistic by estimating average run lengths, coefficients of variation of run length and ranks in signaling order. On the basis of simulation results, we suggest a control chart scheme appropriate for specific quality control environment.

• Management Science and Financial Engineering
• /
• 제5권1호
• /
• pp.51-71
• /
• 1999

Performance of the group cumulative sum (CUSUM) control scheme using multiple univariate CUSUM charts is more sensitive to the change of quality control (QC) characteristics than the control chart schemes based on the Hotelling statistic We vexamine three group charts for multivariate normal data sets simulated with various correlation structures and shift directions in the mean vector. These group schemes apply the original measurement vectors, the scaled residual vectors from the re-gression of each variable on all others and the principal component vectors respectively to calculat-ing the CUSUM statistics. They are also compared to the multivariate QC charts based on the Ho-telling statistic by estimating average run lengths, coefficients of variation of run length and ranks in signaling order. On the basis of simulation results, we suggest a control chart scheme appropriate for specific quality control environment.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.102-109
• /
• 2006

This paper investigates the effects of non-normality on the performance of univariate and multivariate cumulative sum(CUSUM) control charts for monitoring the process mean. In-control and out-of-control average run lengths of the charts are examined for the univariate/multivariate lognormal and t distributions. The effects of the reference value and the correlation coefficient under the non-normal distributions are also studied. Simulation results show that the CUSUM charts with small reference values are robust to non-normality but those with moderate or large reference values are sensitive to non-normal data especially to process data from skewed distributions. The performance of the chart to detect mean shift of a process is not invariant to the direction of the shift for skewed distributions.

• 응용통계연구
• /
• 제27권5호
• /
• pp.787-796
• /
• 2014

Poisson 분포를 따르는 결점수를 관측하여 공정을 관리할 때 표본 크기를 동일하게 유지하기가 힘든 경우가 많다. 이 논문은 표본 크기가 동일하지 않은 경우 Poisson 공정모수의 변화를 탐지하는 GLR(generalized likelihood ratio) 관리도 절차를 제안하고 있다. 또한 제안된 GLR 관리도의 효율을 모의실험을 통하여 기존에 연구된 CUSUM 관리도들과 비교하였다. 모의실험 결과, 제안된 GLR 관리도는 공정모수의 다양한 변화에 대해 효율이 대체적으로 양호했으며, CUSUM 관리도에서 실제 공정모수의 변화값이 미리 지정한 값과 차이가 많이 날 경우 CUSUM 관리도에 비해 효율이 월등히 좋음을 알 수 있었다.

• Journal of the Korean Data and Information Science Society
• /
• 제26권1호
• /
• pp.261-269
• /
• 2015

Nowadays the application of change point analysis has been indispensable in a wide range of areas such as quality control, finance, environmetrics, medicine, geographics, and engineering. Identification of times where process changes would help minimize the consequences that might happen afterwards. The main objective of this paper is to compare the change-point detection capabilities of Bayesian estimate and maximum likelihood estimate. We applied Bayesian and maximum likelihood techniques to formulate change points having a step change and multiple number of change points in a Poisson rate. After a signal from c-chart and Poisson cumulative sum control charts have been detected, Monte Carlo simulation has been applied to investigate the performance of Bayesian and maximum likelihood estimation. Change point detection capacities of Bayesian and maximum likelihood estimation techniques have been investigated through simulation. It has been found that the Bayesian estimates outperforms standard control charts well specially when there exists a small to medium size of step change. Moreover, it performs convincingly well in comparison with the maximum like-lihood estimator and remains good choice specially in confidence interval statistical inference.