• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.15-23
• /
• 2018

The occurrence of soil erosions in Korea is mostly driven by flowing water which has a close relationship with rainfalls. The soil eroded by rainfalls flows into and deposits in the river and it polluted the water resources and making the rivers become difficult to be managed. Recently, the frequency of heavy rainfall events that are more than 30 mm/hr has been increasing in Korea due to the influence of climate change, which creating a favourable condition for the occurrence of soil erosion within a short time. In this study, we proposed a method to estimate the distribution of rainfall intensity and to calculate the energy produced by a single rainfall event using the cumulative distribution function that take into account of the physical characteristics of rainfall. The raindrops kinetic energy estimated by the proposed method are compared with the measured data from the previous studies and it is noticed that the raindrops kinetic energy estimated by the rainfall intensity variation is very similar to the results concluded from the previous studies. In order to develop an equation for estimating rainfall kinetic energy, rainfall particle size data measured at a rainfall intensity of 0.254~152.4 mm/hr were used. The rainfall kinetic energy estimated by applying the cumulative distribution function tended to increase in the form of a power function in the relation of rainfall intensity. Based on the equation obtained from this relationship, the rainfall kinetic energy of 1~80 mm/hr rainfall intensity was estimated to be $0.03{\sim}48.26Jm^{-2}mm^{-1}$. Based on the relationship between rainfall intensity and rainfall energy, rainfall kinetic energy equation is proposed as a power function form and it is expected that it can be used in the design of short-term operated facility such as the sizing of sedimentation basin that requires prediction of soil loss by a single rainfall event.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.514-520
• /
• 2008

Purpose: Many attempts have been made to describe ideal facial proportions for over two thousands year and constantly lasted till now. Dr. Marquardt has derived supposedly ideal facial proportions from the facial golden mask using golden ratio of 1 : 1.618. On the other hand, facial reducing surgeries such as mandible angle reduction are popularized in Asia because the width of mid and lower face of Korean is recognized to be wider. The purpose is to analyze characters of Korean university students' faces in horizontal plane and establish the objective data for facial width distributions and clinical applications. Methods: We applied the facial golden mask to the photographs in 1000 cases, compared the width of mid and lower face between the facial golden mask and Korean university students' faces. And we first calculated the horizontal ratio(HR) of middle and lower face each for using comparative scale of width, facial golden mask. We divided 1,000 cases into 3 groups by degrees of HR and analyzed data of HR on each groups. Using calculated horizontal ratio, we newly invented the cumulative frequency of distribution graphs in Korean university students' faces. Results: Mean data of HR were over 1.0 in all groups, which means that Korean university students' faces are typically wider than facial golden mask in horizontal planes. And this study was statistically significant(p- value < 0.05). Clinically using the cumulative frequency distributions of Korean university students' face width, we can easily explain changes of facial width to patient after facial reducing surgery and describe the changes into objective data. Conclusion: This study concludes thatKorean university students' faces are wider than facial golden mask is significantly true and the cumulative frequency of distribution graphs are expected to be widely used for comparison of results in facial reducing surgery.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.615-626
• /
• 2020

The purpose of this study is to analyze the determinants of risk factor model for the Jordanian banking stocks from 2006 to 2018. This study employs the Five-factor Fama and French's (2015) methodology and uses the annual returns of all Jordanian banks including 2 Islamic and 13 commercial banks listed on the Amman Stock Exchange (ASE) over a period of 13 years. The results show that the factors of value and profitability have an important role in evaluating the expected return in Jordanian banking stocks. Moreover, the value HML and profitability RMW factors provide the highest cumulative returns among these five factors, while the investment CMA and size SMB factors are still around zero cumulative returns. For the market factor, it provides the least negative cumulative returns. The results showed that the largest correlation is between value and investment factors which means that banks with a high book to market value become banks with a conservative investment strategy. The result of the sub-periods confirmed the value and profitability results. The findings of this study suggest that the five-factor Fama and French model is the choice of building an investment portfolio, especially the factors of value and profitability.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.453-461
• /
• 1999

The estimation of fatigue life at the design stage is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the structure and machinery compo-nents. In this study the practical procedure of prediction of fatigue life by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function is shown with a $135,000m^3$ LNG tank being used as an example. In particular the parameters of Weibull distribution taht determine the stress spectrum are dis-cussed. At the end some of uncertainties associated with fatigue life prediction are discussed. The main results obtained from this study are as follows: 1. The practical procedure of prediction of fatigue life by use of cumulative damage factors expressed in combination of probability density function and S-N data is proposed. 2. The calculated fatigue life is influenced by the shape parameter and stress block. The conser-vative fatigue design can be achieved when using higher value of shape parameter and the stress blocks divded into more stress blocks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.601-614
• /
• 2012

Since the optimized use of sonar systems available for detection is a very practical problem for a given ocean environment, the measure of mission achievability is needed for operating the sonar system efficiently. In this paper, a theory on Measure Of Effectiveness(MOE) for specific mission such as detection is described as the measure of mission achievability, and a recursive Cumulative Detection Probability(CDP) algorithm is found to be most efficient from comparing three CDP algorithms for discrete glimpses search to reduce computation time and memory for complicated scenarios. The three CDPs which are MOE for sonar-maneuver pattern are calculated as time evolves for comparison, based on three different formula depending on the assumptions as follows; dependent or independent glimpses, unimodal or non-unimodal distribution of Probability of Detection(PD) as a function of observation time interval for detection. The proposed CDP algorithm which is made from unimodal formula is verified and applied to OASPP(Optimal Acoustic Search Path Planning) with complicated scenarios.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.87-94
• /
• 2007

This paper presents new criteria for DGA(Dissolved Gases Analysis) using CDF(Cumulative Distribution Function) obtained from the data from the diagnosis of transformers operated in KEPCO over a period of 16 years. Because of differences in operating environments, construction type, oil volume, and other factors, the interpretative criteria of DGA at KEPCO differs from other standards such as IEC-60599, or Rogers and Doernenburg. To suggest the most appropriate criteria, the DGA data from transformers under normal conditions as well as from developing fault transformers were collected. Using these data, this study suggests the limitative gas level of transformers under normal operating conditions and verifies the suitability of the criteria. Because the application of this new criterion to transformers at KEPCO increases the detectable ratio of incipient faults and reduces unnecessary follow-up sampling and analysis, the new criteria yields a more reliable prediction of transformer condition.

• International Journal of Reliability and Applications
• /
• v.15 no.2
• /
• pp.85-98
• /
• 2014

Accelerated life testing (ALT) is a well famous technique in life testing and reliability studies, this is particularly used to induce so high stress leading to failure of the highly reliable units quickly under stipulated duration of time. The step-stress ALT is one of the systematic experimental strategy of ALT applied to fail the units in steps. In this article we focus on two important issues (i) necessity of life tests at higher steps with relevant causes (ii) to develop a new optimum test plan for 3-step SSALT under the modified cumulative exposure model proposed by Khamis and Higgins (1998). It is assumed that the lifetime of test units follows Rayleigh distribution and its scale parameter at constant stress level is assumed to be a log-linear function of the stress. The maximum likelihood estimates of the parameters involved in the step-stress ALT model are obtained. A simulation study is performed for numerical investigation of the proposed new optimum plan 3-step, step-stress ALT. The necessity of the life test units at 3-step step-stress is also numerically examined in comparison to simple step-stress setup.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.27-33
• /
• 2013

In this paper, we design and analyze the performance of Coordinated Multi-Point (CoMP) techniques to the number of users for next-generation cellular systems. We perform Monte Carlo simulations with Long Term Evolution-Advanced (LTE-Advanced) and confirm the performance from the graph of the Cumulative Distribution Function (CDF). From simulation results, we show the significant performance gain when CoMP technique is used and also show better performance when we apply the various schemes additionally as scheduling and precoding.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1083-1097
• /
• 2018

This paper presents a novel range-free localization algorithm based on quantum particle swarm optimization. The proposed algorithm is capable of estimating the distance between two non-neighboring sensors for multi-hop heterogeneous wireless sensor networks where all nodes' communication ranges are different. Firstly, we construct a new cumulative distribution function of expected hop progress for sensor nodes with different transmission capability. Then, the distance between any two nodes can be computed accurately and effectively by deriving the mathematical expectation of cumulative distribution function. Finally, quantum particle swarm optimization algorithm is used to improve the positioning accuracy. Simulation results show that the proposed algorithm is superior in the localization accuracy and efficiency when used in random and uniform placement of nodes for heterogeneous wireless sensor networks.