• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.292-296
• /
• 2021

The purpose of this article is to explore the modern branding - its nature, history, originality, spirit and value to consumers. In particular, graphic design of the brand is an important component in terms of the modern European culture. The scientific novelty of the work implies the study of the contemporary design, which widely embraces the sphere of cultural and social life and can contribute to the development of progressive phenomena in society, as the design can literally be defined as a rethinking, a search for new meanings. The design itself is a versatile means of communication at the level of feelings and meanings. One of its main goals is the harmonization, and even formation of perception of the world, creation of new images or rethinking the essence of ordinary things. Hence, the research in the field of the design development is topical in the worldwide cultural space..

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.239-250
• /
• 2021

This study has been conducted to identify the theoretical understanding of cultural competence by systematically reviewing national and international quantitative studies on 'nurses' and 'nursing students' cultural competence dimensions. A literature search was conducted over approximately three months from June to August 2020, targeting academic journals and dissertations published from January 1, 2010, to December 31, 2019. Literature extraction was conducted according to the PRISMA guidelines, and 67 papers from a total of 1,175 were selected for the systematic literature review. As a result, the most commonly measured component was cultural perception, other dimensions included cultural knowledge, cultural skills, cultural sensitivity, cultural encounter, cultural attitude, cultural behavior, cultural longings and cultural receptivity, cultural experience, cultural security, cultural ethics, cultural beliefs, cultural practice, motivation and curiosity, cultural emotions and empathy. Therefore, in order to improve the cultural competency of nurses and nursing students, it is necessary to seek consensus and a multifaceted approach that is essential in each society based on various components.

• 보존과학연구
• /
• s.22
• /
• pp.5-25
• /
• 2001

The germicidal and insecticidal properties of volatile components extracted from star anise(Illicium verum Hooker filius) and clove (Eugenia caryophyllata THUNBERG)were evaluated against five microorganisms and three insects for the purpose of developing biocidal active substances from medicinal plants. The volatile components of star anise and clove showed strong antimicrobial effect against Aspergillus niger, Penicillium funiculosum, Mucor hiemalis, Trichoderma viride, and Aureobasidium pullulans. The extracts of each medicine also showed insecticidal effects against Sitophilusoryzae L., Lyctus linearis GOZE, and Reticulitermes spertus kyushuensis Morimoto. Fumigant toxicities to adult insects were determined. In the case of fumiganttoxicity, the extract of star anise showed 100% mortality against R. spertus, S.oryzae, and L. linearis at rates of $2.5\mu\ell$, $50\mu\ell$, $250\mu\ell$/filter paper, respectively but showed no killing effects by clove. The volatile components of star anise and clove were investigated by means of GC/MS. The main constitute, anethole among 20components from star anise and eugenol among 9 components from clove were identified. The mixture of star anise and clove as the volume ratio of 2 : 1 showed higher properties for antimicrobial and insecticidal effect than each volatile component. A. niger was inhibited by the mixture(125ml/$m^3$) for up to 10 days of exposure. Also, from the result of observing state change of organic materials by volatile extracts of star anise and clove, volatile extracts effects have no effect on natural organic materials of organic cultural properties and can be used as biological control agent. As research contents as above, the insecticidal and germicidal agents from star anise and clove and the mixture of them were more efficient and high level to prevent biological damage for conservation of organic cultural properties. So they may be used in new development of biologicalinsecticidal and germicidal agents for conservation of cultural properties.

• 보존과학연구
• /
• s.35
• /
• pp.111-119
• /
• 2014

Microorganisms were isolated from Dongchundang(wooden cultural heritage) with PDA medium culture. Nineteen species shows the cellulolytic activity. Methylobacterium sp. was the most active in cellulose degradation. The growth curve and pH were measured during incubation of the microorganism for 72 hours. The pH was increased with the increasing of microbial growth. The degree of cellulose degradation was determined with the amount of reducing sugar by use of dinitrosalicylic acid (DNS) method. The amount of reducing sugar was decreased after 45 hours. As a results, It should suggested that wood component were deteriorated by Methylobacterium sp..

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.818-825
• /
• 2015

This study is conducted to develop new termite colony elimination system that can control termite colony much faster, and to eco-environmentally prevent termite damage occurred in wooden cultural heritage. As a result of laboratory test, we developed a component system, of which fipronil 0.001% (w/w) treated bait was used as a suitable termite colony eliminator. This system can be monitored without taking off underground, and it makes regular monitoring much more efficient. The result of field test showed that 36 termite baiting devices among 367 installed devices were damaged by foraging termites. After baiting, all of termite colonies attracted to devices were eliminated or their activity clearly decreased.

• Journal of Conservation Science
• /
• v.37 no.4
• /
• pp.340-356
• /
• 2021

We have tried the experimental research of lost-wax casting to reconstruct Gilt-Bronze Pensive Bodhisattva; preliminary and reconstruction experiment based on ancient texts. Main object to reconstruct is Korean National Treasure No.83, Gilt-Bronze Pensive Bodhisattva (Maitreya), then we measure alloy ratio and casting method based on the scientific analysis. Other impurities were removed from the base metal components(copper : tin : lead) and their ratio was set to 95.5 : 6.5 : 3 where the ratios for tin and lead were increased by 2.5% each. The piece-mold casting method was used, and piece-mold casting experiments were carried out twice in this study but supplementary research on piece-mold casting was necessary. The microstructure was confirmed to be typical cast microstructure and the component analysis result was similar to that of the prior study. Analysis of the chemical composition is confirmed to copper, tin, lead, and zinc, and the chemical composition of the matrix was 87.8%Cu-7.5%Sn-2.7%Pb-2.1%Zn, and similar to previous experimental research. Also resulted in the detection of small impurity in Zn. Analysis of the mould revealed that the mould was fabricated by adding quartz and organic matter for structural stability, fire resistance, and air permeability. We expect that our research will contribute to provide base data for advanced researches in future.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.223-234
• /
• 2016

Two-component epoxy resin is widely used in the cultural heritage restoration field. However according to mixing ratio of resin and hardener, curing property, mechanical strength and chemical structure differ which have possibility to effect the stability of cultural heritage. Result of questionnaire survey shows hands-on workers in the conservation field tend to mix the epoxy resin with his or her eye measurement when the using amount is small or mix additional hardener to shorten the pot life of epoxy resin. This research aims to analyze the curing property, mechanical strength and chemical structure of rapid curing type epoxy resin and medium curing type one depending on relative ratio of 0.25~4 of hardener to resin. When the amount of hardener was 0.5~2 times more than the resin, exothermic heat and curing speed were both increased. In case of included hardener to resin was lower than official ratio, mechanical strength (tensile shear strength, tensile strength and compressive strength) became higher along with active cross-linking bonding of the epoxy resin. Medium curing type epoxy relatively had lower exothermic heat and slower reaction during curing process. It was observed to be put to definite point of mechanical strength under lower content of hardener than official ratio. While, hardener ratio more than twice the resin slowed down the curing greatly and lowered the adhesion strength also. In conclusion, under the lower mixing rate of hardener than official ratio would show relatively fast reaction with similar mechanical strength. Over the official ratio on the other hand, material property drops rapidly. Accordingly, mixing ratio of epoxy resin is expected to be influential to the stability of cultural heritage.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.241-266
• /
• 2003

Glass pieces excavated from Mireuksa Temple dated $7^{th}$ century A.D. were characterized by chemical composition, specific gravity and melting point. Lead isotope ratios of lead glasses were also compared with those of lead ore to attribute which lead ore was delivered for making lead glass. It was known that some lead glasses found in Japan were similar with those of Mireuksa Temple as comparing the data of chemical composition and lead isotope ratios. Characteristics of lead glass from Mireuksa Temple Thirty five glass pieces of Mireuksa Temple were analyzed for five oxides and found that all was lead glass system(PbO-$SiO_2$) with the range of 70~79% for PbO and 20~28% for $SiO_2$. The concentrations of oxides such as $Al_2O_3$, $Fe_2O_3$ and CuO were below 0.4%, 0.3% and 0.9%, respectively. Principal component analysis(PCA) as a statistical method was carried out to classify glasses with the similarities of chemical concentrations. The result of PCA has shown that three groups of glasses were created according to the excavation positions and two major oxides(PbO and $SiO_2$) greatly contributed to the dispersion of glasses on principal component 1(PC1) axis and trace element oxides($Al_2O_3$ and $Fe_2O_3$) for PC2 axis. Most of lead glasses were greenish by the efficacy of iron and copper oxides and some showed yellowish-green. The gravity of lead glasses was about 4.4~5.4 and estimated melting point was near $670^{\circ}C$. Lead isotope ratios of glasses were analyzed and found quite close to a lead ore from the Bupyeong mine in Gyeonggi-do. Comparison with lead glasses found in Japan Lead glasses of Mireuksa Temple were compared with those of Japan on the basis of chemical and physical data. Chemical compositions of Japanese lead glasses dated $7^{th}{\sim}8^{th}$ century A.D. were nearly similar with those of Mireuksa Temple but lead isotope ratios of those were separated into two groups. Three distribution maps of lead ores of Korea, Japan and China with lead isotope ratios were applied for lead glasses found in Japan. The result have shown that the locations of lead glasses from Fukuoka Prefecture coincided with the region of northen part of Korea and similar with those of Mireuksa Temple and lead glasses from Nara Prefecture dated $8^{th}$ century A.D. were located in the region of Japanese lead ore. This research has demonstrated that lead glasses of Mireuksa Temple conveyed to Miyajidake site, Fukuoka Prefecture around $7^{th}$ century A.D. and glass melting pots and glass beads excavated from Nara Prefecture confirmed the first use of Japanese lead ore for production of lead glasses from the end of $7^{th}$ century A.D.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.117-131
• /
• 2018

Due to the paradigm shift of the industrial structure in the contemporary china society, the usage of practical function of industrial facilities goes down in this high developing society, so that it falls into some unused spaces. But the unused industrial facilities that including historical, symbolic and cultural meaning has been creating a new cultural space by giving architectural form and function through a variety of application methods for revitalization design. Especially, the facade design which fully expresses the function and meaning of building while properly expressing the cultural situation. It improves the living and cultural conditions of residents while giving the new symbolism of unused industrial facilities through various ways of application methods for revitalization. The unused industrial facilities that was reconstructed into the exhibition space in Beijing and Shanghai, china since 2006 is the object and scope of this study. The purpose of this study is to analyze the methods and characteristics of application methods for revitalization according to each component of the facade design in the idle industrial facility and to expect it to become basic data in the future design plan of unused industrial facilities.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.131-134
• /
• 2004

A lot of foreign objects(ceramics, pottery, bronze, glassware and coins, etc.) have been found in the archaeological sites in Korea. These foreign objects are the evidences of the cultural exchanges of that time, whose scale and routes are an important part of the studies in ancient history. So it is crucial to accumulate basic reference information such as the raw materials and the production method of these objects through scientific researches, along with archeological researches. These scientific research materials provide a basis for finding the importing route and the origin of these objects. Besides, we can find out extraordinary and distinctive production technique by comparison with tile domestic objects. This article reports the result of an analysis, performing on 36 samples of the glassware fragments excavated from the South Tomb of the Hwangnamdaechong, to verify their components and note peculiar features. We have analyzed the major and minor components of 10 elements, and then by using these data examined the differences in the composition of components, varying with the origin and color of glassware. We used the PCA(principal component analysis) as the statistical method to classify the sample in order to find out how the samples formed groups.