• 소성∙가공
• /
• 제32권5호
• /
• pp.255-267
• /
• 2023

Recently, 3D printing using a material extrusion method is used in various fields. Since plastic material has lower strength than steel, research to increase the strength is continuously being conducted. This study investigates the lattice structure for additive manufacturing of six 3D infill patterns (octet, quarter cubic, cubic, cubic subdivision, triangles and cross 3D) which consist of tetragons, hexagonal trusses, equilateral triangles and cross shapes. Consequently, in the tensile strength considering the weight and printing time, octet, quarter cubic, cubic and triangles patterns tended to increase linearly as the infill density increased, except for the infill density of 20%. However, the tensile strength/weight performed better than the infill density of 100% when the cubic subdivision pattern had the infill density of 20% and the cross 3D pattern had the infill density of 40%. Considering the weight and printing time, the infill patterns of high tensile strength were octet, quarter cubic, cubic, cubic subdivision, triangles and cross 3D order.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.133-133
• /
• 2021

The performance of radar Quantitative Precipitation Estimation (QPE) using Long Short-Term Memory (LSTM) networks in hydrological applications depends on either the quality of data or the three-dimensional CAPPI structure from the weather radar. While radar data quality is controlled and enhanced by the more and more modern radar systems, the effect of CAPPI structure still has not yet fully investigated. In this study, three typical and important types of CAPPI structure including inverse-pyramid, cubic of grids 3x3, cubic of grids 4x4 are investigated to evaluate the effect of CAPPI structures on the performance of radar QPE using LSTM networks. The investigation results figure out that the cubic of grids 4x4 of CAPPI structure shows the best performance in rainfall estimation using the LSTM networks approach. This study give us the precious experiences in radar QPE works applying LSTM networks approach in particular and deep-learning approach in general.

• 한국세라믹학회지
• /
• 제35권11호
• /
• pp.1182-1189
• /
• 1998

Crystal structure and structural stability of needle-shaped maghemite(${\gamma}$-{{{{ { {Fe }_{2 }O }_{3 } }}) have been studied by the computation and estimation of lattice energies interionic distances and site potentials. The refined struc-tures analyzed with cubic system(space group P4332) and tetragonal system(space group P4332) were used for these computations. The lattice energy of tetragonal system is -143.10eV/molecule. The maghemite structure with tetragonal system is more stable than that with cubic system. The ordering energy of the FE and cation vacancy within the octahedral site the 4b site of the structure with cubic system(space group P4332) is -0.95eV/molecule but this Fe has larger interionic distance and is very unstable.

• 지질공학
• /
• 제5권2호
• /
• pp.233-235
• /
• 1995

단순히 일축성으로만 보이는 선현 구조의 정향은 다른 조직 요소와 결합되어 있을 경우 입체적으로 이해되어야 한다. 그것은 측정과 보정 뿐만 아니라 분석 과정에도 필요하다.

• International Journal of Quality Innovation
• /
• 제3권2호
• /
• pp.84-92
• /
• 2002

In this Paper, We propose new performance measure model in Logistic Industry. New model has been learned by key points of PZB model and advanced structure of MBNQA which has cause measure points and effect measure points. The Structure of new performance measure model is Cubic Model which is reflected with time. We try to verify this model apply advance logistic company.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.19-26
• /
• 2021

격자 구조체는 강도 및 강성, 초경량 및 에너지 흡수 능력 등의 우수성을 가지고 있어서 전방위 산업에서 주목을 받고 있으나, 다양한 장점에도 불구하고 복잡한 형상에 따른 제조 공정의 어려움으로, 현재까지 광범위한 상용화 및 사용은 제한되고 있다. 한편 적층 제조는 전통적인 제조 방법으로는 불가능한 복잡한 기하학적 형상 제조가 가능한 기술로써, 격자 구조체 제조를 위한 최적 기술로 주목을 받고 있다. 본 연구에서는 3차원 좌표 방법으로 단위 셀을 형성하고, 단위셀의 바운더리 박스 크기 및 스트럿 반경에 따른 상대 밀도의 관계식을 도출하였다. 본 연구에서는 Simple Cubic(SC), Body-Centered Cubic(BCC) 및 Face-Centered Cubic(FCC)을 모델링 소프트웨어를 사용하여 상대 밀도 맞춤형 구조체를 설계하였다. 본 연구에서 제안한 상대 밀도 산출식 정확도는 SC, BCC 및 FCC에서 98.3 %, 98.6 % 및 96.2%의 신뢰성을 확보하였다. 격자 구조체를 대상으로 시뮬레이션 수행 결과, 동일한 셀 배열 조건에서는 상대 밀도가 커짐에 따라 항복 하중이 커지고, 동일 배열 조건에서는 SC, BCC, FCC 순으로 압축 항복 하중이 작아지는 결과가 나타났다. 최종적으로 20 mm × 20 mm × 20 mm 크기의 구조체는 SC 단위 셀을 3×3×3 배열로 구성하는 것이 압축 하중에 대한 구조적 최적화가 가능한 것으로 나타났다.

• 전기화학회지
• /
• 제9권4호
• /
• pp.158-169
• /
• 2006

The present article is concerned with the overview of the chemically/surface modified cubic spinel $LiMn_2O_4$ as a cathode electrode far lithium ion secondary batteries. Firstly, this article presented a comprehensive survey of the cubic spinel structure and its correlated electrochemical behaviour of $LiMn_2O_4$. Subsequently, the various kinds of the chemically/surface modified $LiMn_2O_4$ and their electrochemical characteristics were discussed in detail. Finally, this article reviewed our recent research works published on the mechanism of lithium transport through the chemically/surface modified $Li_{1-\delta}Mn_2O_4$ electrode from the kinetic view point by the analyses of the experimental potentiostatic current transients and ac-impedance spectra.

• 한국재료학회지
• /
• 제11권5호
• /
• pp.393-397
• /
• 2001

고온구조용 재료로의 사용이 기대되는 $Al_3$Ti금속간 화합물의 연성 향상을 위한 목적으로 기계적 합금화를 통한 cubic Ll$_2$구조의 생성거동과 Mn의 첨가 영향을 조사하였다. Al-8Mn-25Ti조성에서 20시간의 기계적 합금화를 통해 약 1.0nm 사이즈의 grain을 갖는 nanocrystalline cubic Ll$_2$Al$_3$Ti 금속간 화합물이 제조되었다. Mn이 첨가된 3원계 cubic Ll$_2$Al$_3$Ti 금속간 화합물은 2원계 cubic Ll$_2$Al$_3$Ti 금속간 화합물에서 보이는 Ll$_2$구조에서 D0$_{23}$구조나 D0$_{22}$구조로의 상변태가 발생하지 않았으며 Mn의 첨가로 인해 Ll$_2$구조는 120$0^{\circ}C$가지 안정함을 보였다.

• 대한수학회논문집
• /
• 제32권4호
• /
• pp.789-803
• /
• 2017

Let $K={\mathbb{Q}}({\alpha})$ be a cubic field where ${\alpha}$ is an algebraic integer such that $disc_K({\alpha})$ is square-free. In this paper we will classify the structure of the unit group of the quotient ring ${\mathcal{O}}_K/A$ for each non-zero ideal A of ${\mathcal{O}}_K$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.403-403
• /
• 2010

The Pt-Ni alloy is an electro-catalyst of interest in the low temperature direct methanol fuel cells(DMFCs). It has been already reported that the Pt-Ni alloy catalysts may even have enhanced activity compared to pure platinum catalyst, depending on how the surfaces are prepared. The order-disorder transition in bimetallic alloy such as $\beta$-CuZn, Cu3Au, and CuAu have been investigated greatly by x-ray diffraction. After annealing the bimetallic alloy, the crystal structure changes as observed in the order-disorder transition of Cu3Au which changes from the face centered cubic to a simple cubic structure. Pt-Ni bimetallic alloy has been already reported to have the face centered cubic structure. However, in nano-scale Pt-Ni bimetallic alloy crystals the crystal structures changes to a simple cubic structure. In this experiment, we have studied the order-disorder transition in Pt-Ni bimetallic nanocrystals. Pt/Ni thin films were deposited on sapphire(0001) substrates by e-beam evaporator and then Pt-Ni alloy were formed by RTA at 500, 600, and $700^{\circ}C$ in a vacuum environment and Pt-Ni nano particles were formed by RTA at $1059^{\circ}C$ in a vacuum environment. We measured the structure of Pt-Ni bimetallic alloy films using synchrotron x-ray diffraction and SEM.