• 수산해양기술연구
• /
• 제27권1호
• /
• pp.75-82
• /
• 1991

어선의 초기 설계 단계에서 필요한 초기선형의 선수미부 생성을 위하여 B-spline 곡선과 형상계수를 결합한 방법을 적용하였다. 선수미부의 각부분에 대하여 선형별로 형상계수를 선정한 뒤 이를 이용하여 B-spline 곡선의 정점을 구하도록 하였다. 선수부분의 경우 bulbous bow를 가지는 경우와 그렇지 않는 것으로 크게 분류한 뒤 bulbous bow를 가지는 경우는 수선면 근처의 형상에 따라 2가지로 분류하였다. 수선면보다 윗부분에 대해서는 bulbuos bow와는 무관하므로 이의 유무에 상관없이 직선으로 갑판까지 가는 경우와 곡선을 가지는 경우로 분류하여 다루었다. 선미부분의 경우는 수선면 윗부분은 transom stern과 cruiser stern으로 분류하였으며 수선면이하의 부분은 선미 bulb를 가진 선형과 shoe piece를 가진 선형으로 분류하여 다루었다. 형상계수는 각 경우에 따라 반드시 지켜야 할 점의 좌표와 기울기 등이 우선 선정되었으며 곡선부의 볼록한 정도를 조절해 주는 계수들이 선정되었다. 형상계수를 이용하여 곡선을 생성시킬 기법으로는 다항식, cubic spline, parabolic blending, bezier curve, non-algebraic function 등이 있으나 연속성이 충분히 보장되고, 국부적으로 변형이 가능하며, 불연속점이 정의 및 직선의 표현이 가능한 B-spline을 선택하였다

• 펄프종이기술
• /
• 제29권1호
• /
• pp.7-12
• /
• 1997

This study was intended to investigate the proper shape and size of calcium carbonate for the improvement of paper properties and its end use performance. We loaded calcium carbonate of various shapes and size in the handsheet and measured their physical and optical properties. Results obtained from the study are summarized as follows : 1. Due to different particle shapes and sizes, precipitated calcium carbonate (PCC) contributed greater to bulk improvement than ground calcium carbonate (GCC). Scalenohedral form of PCC produced the bulkiest sheet, GCC made the sheet bulkier as average particle size increases. 2. Tensile strength increased as average particle size was increasing. GCC kept tensile strength more effectively than PCC. The effect of particle size on tensile strength was much more pronounced as filler addition level was increasing. 3. Over the average particle size of 6.99$\mu$m, GCC gave much higher burst strength and internal bond than PCC did. In the filler levels of 20% and 30%, GCC by using bigger size fillers showed 50~100% improvement in some cases than PCC at the same filler content. 4. Tear strength increased as average particle size was increasing. At the filler level of 30%, PCC decreased tear greatly. 5. Over the average particle size of 13.56$\mu$m, GCC kept bending stiffness greater than PCC. Due to its shape, Scalenohedral form of PCC showed higher stiffness than others at the same particle size. 6. Cubic and acicular form of PCC improved light scattering coefficient very effectively. Light scattering coefficient of GCC decreased as average particle size increased. 7. Both of particle shape and size of filler were important factor in developing optical properties and bending stiffness. Particle size was the only important factor in developing other strength properties

• 한국물환경학회지
• /
• 제38권2호
• /
• pp.82-94
• /
• 2022

In this study, chemically modified biochar (NSBP500, KSBP500, OSBP500) derived from starfish was utilized to improve the adsorption ability of the SBP500 (Starfish Biochar Pyrolyzed at 500℃) in a solution contaminated with heavy metals. According to the biochar modification performance evaluation batch tests, the removal rate and adsorption amount of NSBP500 increased 1.4 times for Cu, 1.5 times for Cd, and 1.2 times for Zn as compared to the control sample SBP500. In addition, the removal rate and adsorption amount of KSBP500 increased 2 times for Cu, 1.8 times for Cd, and 1.2 times for Zn. The removal rate and adsorption amount of OSBP500 increased 5.8 times for Cu. The FT-IR analysis confirmed the changes in the generation and movement of new functional groups after adsorption. SEM analysis confirmed Cu in KSBP500 was in the form of Cu(OH)₂ and resembled the structure of nanowires. The Cd in KSBP500 was densely covered in cubic form of Cd(OH)₂. Lead(Pb) was in the form of Pb₃(OH)₂(CO₃)₂ in a hexagonal atomic layer structure in NSBP500. In addition, it was observed that Zn was randomly covered with Zn₅(CO₃)₂(OH)₆ pieces which resembled plates in KSBP500. Therefore, this study confirmed that biochar removal efficiency was improved through a chemical modification treatment. Accordingly, adsorption and precipitation were found to be the complex mechanisms behind the improved removal efficiency in the biochar. This was accomplished by electrostatic interactions between the biochar and heavy metals and ion exchange with Ca²⁺.

• 천문학회지
• /
• 제48권4호
• /
• pp.213-228
• /
• 2015

The Horizon Run 4 is a cosmological N-body simulation designed for the study of coupled evolution between galaxies and large-scale structures of the Universe, and for the test of galaxy formation models. Using 6300³ gravitating particles in a cubic box of L_box = 3150 h⁻¹Mpc, we build a dense forest of halo merger trees to trace the halo merger history with a halo mass resolution scale down to M_s = 2.7 × 10¹¹h⁻¹M_⊙. We build a set of particle and halo data, which can serve as testbeds for comparison of cosmological models and gravitational theories with observations. We find that the FoF halo mass function shows a substantial deviation from the universal form with tangible redshift evolution of amplitude and shape. At higher redshifts, the amplitude of the mass function is lower, and the functional form is shifted toward larger values of ln(1/σ). We also find that the baryonic acoustic oscillation feature in the two-point correlation function of mock galaxies becomes broader with a peak position moving to smaller scales and the peak amplitude decreasing for increasing directional cosine μ compared to the linear predictions. From the halo merger trees built from halo data at 75 redshifts, we measure the half-mass epoch of halos and find that less massive halos tend to reach half of their current mass at higher redshifts. Simulation outputs including snapshot data, past lightcone space data, and halo merger data are available at http://sdss.kias.re.kr/astro/Horizon-Run4.

• 복식
• /
• 제24권
• /
• pp.143-155
• /
• 1995

Unlike pure art such as painting and sculpture, dressmaking , a field of special plastic art, is characterized by its physical and functional nature. Having an inseparable relation with form, it is a field of art expressiion the human innersense of beauty in correlation with other various fields of art. In this respect, I think it should be necessary for us to study the forms of art from the past in order to study the forms of art from the past in order to study the correlations and mutual influencies between forms of pure art and dressmaking and to understand modern dressmaking from the standpoint of art. In this context, this study is an attempt to analze how the form and characteristics of OP ART , which represents the trends of the 1960's is embodied in modern dresses. The results are as follows : Fist , the expression of OP ART in dresses have visual effects harmonizing with bodily movements and , also, expanded the range and dynamics of expression which resulted from the introduction of visual phenomena in a fresh new sense by not limiting itself to the suggestion of patterns of OP ART. Second, OP ART paintings expressed the mobility and rhythimicity of a body in a limited space in a two-dimensional plane way of expression . When a dress is worn, however, it expands such mobility and rhythmicity in a cubic , three-dimensional way, maximizing the effects of , and boldly expression, OP ART, it can also create a new silhuette and ability of formation by seeking an open expression of OP ART rather than an expression of OP ART it self , due to the infinite possibility and unpredictability by the dynamics of movements and the elements principle of designs. Third , by applying the patterns of OP ART to dresses, we can obtain special visual effects of design, cover up the body's weak points, and create a desired three -dimensional sense by highlighting the beauty of the body's curved lines. Although modern dresses and OP ART are different genres of art, both have something in common in their pusuits. Since there is a infinite possibility in OP ART, there should be continuous attempts to combine dresses and art satisfying the sense of the times, which will lead dressmaking to a higher-dimensional dressmaking plastic art.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.117-125
• /
• 1998

Crystallization behavior of platinum minerals within Pt-Sb-Bi bearing ore magmas and mineralogical properties of the existing minerals were investigated at 1,00$0^{\circ}C$ by synthetic experiment. High purity reagents were used as starting materials and silica tubings as containers. Reaction products were analysed by reflecting microscopy, X-ray diffraction, electron probe microanalysis, and micro-hardness test. Stable minerals at 1,00$0^{\circ}C$ are platinum, electron probe microanalysis, and micro-hardness test. Stable minerals at $1,000^{\circ}C$ are platinum, stump-flite (PtSb) and geversite (PtSb2). They are in equilibrium with liquid (ore magma). Platinum contains considerable amount of Sb of 7.5 at.%, whereas Bi only up to 0.9 at.%. Pure stumpflite is hexagonal with space group P63/mmc, and unit cell parameters are a=4.1318(6), c=5.483(1)$\AA$. VHN50=417(2)$\AA$. Geversite has cubic structure with space group Pa3. Cell parameters are a=6.4373(2)$\AA$ and Vicker hardness values VHN50=663.5 (566~766). Both stumpflite and geversite show solid solution and their end-members are Pt48.8Sb40.7-Bi10.5, and Pt33.7-Sb59.8Bi6.5, respectively. Although stumpflite (m.p. $1,043^{\circ}C$) and unnamed PtBi (m.p. 7$65^{\circ}C$) do not form a complete solid solution at $1,000^{\circ}C$, they are known, at $600^{\circ}C$, to form a continuous solid solution. Geversit (m.p. $1,226^{\circ}C$) also forms complete solid solution with insizwaite (m.p. $660^{\circ}C$). Unit cell dimensions of the minerals above increases with the amount of Bi substituting for Sb.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.691-698
• /
• 2010

A study has been carried out to evaluate the interaction behavior between a lanthanide element and clad material in order to analyze the effect of the lanthanide element on the fuel cladding chemical interaction (FCCI). A diffusion couple test between Misch metal (70Ce-30La) and ferritic-martensitic steel (Gr.92) was performed at $660^{\circ}C$, followed by a microstructural analysis of the coupled sample. The results showed that Ce in the Misch metal, rather than La, reacted with the ferritic-martensitic steel (FMS) to form an interaction layer that penetrated the clad thickness. Fe diffused outside the clad interface to form an $Fe_2Ce$ compound, leaving a depletion of Fe caused by excess diffusion as well as by the formation of Cr-rich precipitation inside the interaction layer. The rate of growth followed the cubic rate law, which indicated that Fe depletion was caused by the diffusion of Fe and that the associated Cr-rich phase formation controlled the whole diffusion process.

• 헤리티지:역사와 과학
• /
• 제35권
• /
• pp.236-282
• /
• 2002

Among elements of play, there are puppets performances and shadows performance which are replacing actors by puppets and shadows. Puppet performance is characteristic of expressing various movements and symbols at its conveniences by the reduced models of human form with various materials. Shadow performance is realized in various colors that cannot be discovered in other countries by expressing mysterious cubic effect in reflecting the light against various forms. Mansukjung Nolum is a unique shadow performance that has been inherited in Korea. There are found many shadow performances inherited in the northern Europe and South-eastern Asia. Recently the silhouette animation in application of shadow performance is made. In the northern Europe and South-eastern Asia, they performed in white and black color while Mansukjung Nolum is performed in natural colors. Since they adopted the leather materials for making puppets, their opaque feature cannot reflect the colored light. But in Korea we adopted the specially colored semi-transparent Korean paper, which gives the colored shadows to spectators. Mansukjung Nolum consists of three acts for arousing attention of fallen monks destroying the teaching of Buddha. Seosanbakchumji Nolum is a puppet performance inherited in a village in Seosan, Choongnam instead of wandering artists. The story and form of performance in Namsadangpae's puppet play is mostly similar to it, but it is woven by its villages natural environment and specific dialects, reflecting their consciousness in mind. The villagers made the puppets and manipulate them in communicating their wisdom of life between them. Parkchumji Nolum is a kind of integral art combining puppet manipulation, witticism, songs and dances. The hero of Parkchumji discloses the social and structural conflicts of feudalism, in arousing the spectators' rich attention of self-awareness and lessons.

• The International Journal of Costume Culture
• /
• 제4권2호
• /
• pp.138-145
• /
• 2001

This study aims to compare the beauty of costume in the Gothic with that of Renaissance periods. By analyzing the beauty of costume which reflects the ideal of the age, this study attempts to provide the insight which can predict the beauty of future costume The characteristics of Gothic costume is the from of the loose enveloping of the body, which can be accounted for from the influence the Christian religion, and the emphasis on the vertical line influenced by the steeple in the Gothic architecture expressing the enthusiasm of the religion. The emphasis on height in the Gothic cathedrals was reflected in the hennin, pointed shoes, and lengthy sleeves of Gothic dress. The beauty of Gothic costume lies in the from of slender, the emphases on the vertical line, the we of heraldry and parti-color, and pointed hat and shoe. The Renaissance architecture shows a broad horizontal appearance. There is the similarity between the Renaissance costume and Renaissance architecture. The beauty of Renaissance costume lies in the form of the exposing body, the exaggerated silhouette, the emphasis on the horizontal line, the use of ruff and slash in order to display the beauty of human body and the beauty of cubic. The ideal beauty of Gothic and Renaissance costume was influenced by the spirit the age and was in contrast.

• Smart Structures and Systems
• /
• 제8권3호
• /
• pp.321-341
• /
• 2011

Acoustic emission (AE) monitoring was conducted for mortar specimens under three types of static loading patterns (cubic-splitting, direct-shear and pull-out). Each of the applied loading patterns was expected to produce a particular fracture process. Subsequently, the AEs generated by various fracture or damage processes carried specific information on temporal micro-crack behaviors of concrete for post analysis, which was represented in the form of detected AE signal characteristics. Among various available characteristics of acquired AE signals, frequency content was of great interest. In this study, cement-based piezoelectric sensor (as AE transducer) and home-programmed DEcLIN monitoring system were utilized for AE monitoring on mortar. The cement-based piezoelectric sensor demonstrated enhanced sensitivity and broad frequency domain response range after being embedded into mortar specimens. This broad band characteristic of cement-based piezoelectric sensor in frequency domain response benefited the analysis of frequency content of AE. Various evaluation methods were introduced and employed to clarify the variation characteristics of AE frequency content in each test. It was found that the variation behaviors of AE frequency content exhibited a close relationship with the applied loading processes during the tests.