• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.49-54
• /
• 1989

The purpose of this study was to investigate the interfacial elemental change when solding the Ni-Co-Cr dental removable partial denture alloy and Fe-Cr-Ni wrought wire alloy with Ag-Cu-Zu Silver solder, by EDXA, EPMA, to investigate the appropriateness of clinical usefullness for repair the fractured clasps of removable partial dentive. The result of this study was as follows: 1. The Ni element of major component of Ticonium penetrate into the silver solder 2. The movement Age element of silver solder into Fe-Cr-Ni wire was not significant, by EDXA and EPMA.

• Journal of Electrochemical Science and Technology
• /
• 제10권1호
• /
• pp.82-88
• /
• 2019

Here, we report on nanocrystalline Si-Al-M (M = Fe, Cu, Ni, Zr) alloys for use as an anode for lithium-ion batteries, which were fabricated via a melt-spinning method. Based on the XRD and TEM analyses, it was found that the Si-Al-M alloys consist of nanocrystalline Si grains surrounded by an amorphous matrix phase. Among the Si-Al-M alloys with different metal composition, Ni-incorporated Si-Al-M alloy electrode retained the high discharge capacity of 2492 mAh/g and exhibited improved cyclability. The superior $Li^+$ storage performance of Si-Al-M alloy with Ni component is mainly responsible for the incorporated Ni, which induces the formation of ductile and conductive inactive matrix with crystalline Al phase, in addition to the grain size reduction of active Si phase.

• 한국재료학회지
• /
• 제27권8호
• /
• pp.409-415
• /
• 2017

For enhanced cavitation erosion resistance of vessel propellers, an electroless Ni-P plating method was introduced to form a coating layer with high hardness on the surface of Cu alloy (CAC703C) used as vessel propeller material. An electroless Ni-P plating reaction generated by Fe atoms in the Cu alloy occurred, forming a uniform amorphous layer with P content of ~10 wt%. The amorphous layer transformed to (Ni3P+Ni) two phase structure after heat treatment. Cavitation erosion tests following the ASTM G-32 standard were carried out to relate the microstructural changes by heat treatment and the cavitation erosion resistance in distilled water and 3.5 wt% NaCl solutions. It was possible to obtain excellent cavitation erosion resistance through careful microstructural control of the coating layer, demonstrating that this electroless Ni-P plating process is a viable coating process for the enhancement of the cavitation erosion resistance of vessel propellers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1485-1487
• /
• 2000

A variety of target configurations in sputtering process have been proposed to deposit various structures of thin film alloys and compound films. In this study, we presented the comparative experimental results regarding to the characterization of properties of Cu-Ni thin films deposited by using a magnetron co-sputtering method, as a function of target configurations; one is using a single target with varying the area of Ni chips attached on the Cu target and another is using a dual-type target with two targets of Ni and Cu separated each other. Structural(d-spacing, crystal orientation, crystallite size, cross-sectional morphology) and electrical(resistivity) properties of deposited films are characterized and compared as a function of target configurations as well as deposition conditions.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.137-138
• /
• 2011

구리 이온은 -0.40V (vs. SCE)에서 전기화학적 환원이 일어나는 반면, 니켈 이온은 -1.19V (vs. SCE)에서 전착이 발생한다. 따라서, 단일 도금욕조 내에서 Ni-Cu 합금도금층을 제조하기 위해서는 두 금속 이온종 간의 전위차를 줄여주어야 하는데, 이를 위해 본 연구에서는 $Na_3C_6H_5O_7{\cdot}2H_2O$를 착화제로 사용하였다. 다양한 Ni-Cu 합금 도금층의 조성을 얻기 위하여 기본 도금욕 내 황산니켈과 황산구리의 비율을 10:1로 설정하였다. 도금 공정 조건에 따른 합금 도금층 조성 변화를 관찰하기 위하여 도금액 pH와 교반 속도에 따른 도금층 조성 변화를 분석하였으며, 도금액의 UV-VIS과 도금층의 XRD 와 SEM 측정을 통하여 도금욕과 도금층 간의 상관 관계를 유추하였다. 본 도금액에 사용된 $Na_3C_6H_5O_7{\cdot}2H_2O$ 착화제의 효과는 pH3에서 가장 현저하였으며, pH 변화 및 교반 속도 변화를 이용하여 다양한 합금 조성을 얻을 수 있었다.

• 멤브레인
• /
• 제34권2호
• /
• pp.146-153
• /
• 2024

본 실험에서는 Ti를 기반으로 한 평판 수소 분리막을 설계하여 제조하였다. 새로운 조성의 Ti를 베이스로 한 수소 분리막을 찾기 위하여 여러 합금들의 물리화학적 특성과 수소투과도 사이의 상관관계에 대해 조사하였다. 이를 바탕으로 신조성의 합금막 2종(Ti_14.2Zr_66.4Ni_12.6Cu_6.8 (70 ㎛), Ti_17.3Zr_62.7Ni₂₀ (80 ㎛))을 설계 및 제조하였다. 제조된 평판 수소 분리막은 300~500℃, 1~4 bar의 조건에서 혼합 가스(H₂, N₂), sweep 가스(Ar)를 이용하여 수소 투과 실험을 진행하였다. Ti_14.2Zr_66.4Ni_12.6Cu_6.8 합금막은 500℃, 4bar에서 최대 16.35 mL/cm² min의 flux를 가지며, Ti_17.3Zr_62.7Ni₂₀ 합금막은 450℃, 4 bar에서 최대 10.28 mL/cm² min의 flux를 가진다.

• 한국주조공학회지
• /
• 제17권5호
• /
• pp.443-449
• /
• 1997

The purpose of this study is to investigate the effect of P addition and homogenizing heat treatment on the mechanical properties of Cu-Sn-Ni alloy. The addition of P was 0.025wt.%P to 0.085wt.%P and homogenizing heat-treated at 400, 500, $600^{\circ}C$ under $N_2$ gas atmosphere. Mechanical properties was investigated in this study were Rockwell hardness, tensile strength, and elongation. Tensile strength and elongation increased with P and homogenizing time. Temperature was significantly influence on mechanical properties. Hardness decreased with increasing homogenizing time and temperature, but 0.085wt.%P specimen was showed higher hardness and lower tensile strength and elongation than 0.073wt.%P specimen due to the presence of more $Cu_3P$ in matrix.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.624-630
• /
• 2017

In this study, we investigated the overpotential of precipitation related to the catalytic activity of electrodes on the initial process of electrodeposition of Co and Co-Ni alloys on polycrystalline Cu substrates. In the case of Co electrodeposition, the surface morphology and the magnetic property change depending on the film thickness, and the relationship with the electrode potential fluctuation was shown. Initially, the deposition potential(-170 mV) of the Cu electrode as a substrate was shown, the electrode potential($E_{dep}$) at the $T_{on}$ of electrodeposition and the deposition potential(-600 mV) of the surface of the electrodeposited Co film after $T_{off}$ and when the pulse current was completed were shown. No significant change in the electrode potential value was observed when the pulse current was energized. However, in a range of number of pulses up to 5, there was a small fluctuation in the values of $E_{dep}$ and $E_{imm}$. In addition, in the Co-Ni alloy electrodeposition, the deposition potential(-280 mV) of the Cu electrode as the substrate exhibited the deposition potential(-615 mV) of the electrodeposited Co-Ni alloy after pulsed current application, the $E_{dep}$ of electrodeposition at the $T_{on}$ of each pulse and the $E_{imm}$ at the $T_{off}$ varied greatly each time the pulse current was applied. From 20 % to less than 90 % of the Co content of the thin film was continuously changed, and the value was constant at a pulse number of 100 or more. In any case, it was found that the shape of the substrate had a great influence.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.667-673
• /
• 2009

The electrocatalytic characteristics of oxygen reduction reaction of the $PtxM_{(1-x)}$ (M = Co, Cu, Ni) supported on multi-walled carbon nanotubes (MWNTs) have been evaluated in a Polymer Electrolyte Membrane Fuel Cell (PEMFC). The $Pt_xM_{(1-x)}$/MWNTs catalysts with a Pt : M atomic ratio of about 3 : 1 were synthesized and applied to the cathode of PEMFC. The crystalline structure and morphology images of the $Pt_xM_{(1-x)}$ particles were characterized by X-ray diffraction and transmission electron microscopy, respectively. The results showed that the crystalline structure of the Pt alloy particles in Pt/MWNTs and $Pt_xM_{(1-x)}$/MWNTs catalysts are seen as FCC, and synthesized $Pt_xM_{(1-x)}$ crystals have lattice parameters smaller than the pure Pt crystal. According to the electrochemical surface area (ESA) calculated with cyclic voltammetry analysis, $Pt_{0.77}Co_{0.23}$/MWNTs catalyst has higher ESA than the other catalysts. The evaluation of a unit cell test using Pt/MWNTs or $Pt_xM_{(1-x)}$/MWNTs as the cathode catalysts demonstrated higher cell performance than did a commercial Pt/C catalyst. Among the MWNTs-supported Pt and $Pt_xM_{(1-x)}$ (M = Co, Cu, Ni) catalysts, the $Pt_{0.77}Co_{0.23}$/MWNTs shows the highest performance with the cathode catalyst of PEMFC because they had the largest ESA.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.106-114
• /
• 1992

여러 조성의 Co-Ni 합금과 Au-Cu 합금에 대하여 XPS와 SIMS 분석방법을 사용하 여 표면분석의 정량화 연구를 수행하였다. XPS의 경우 Co-Ni 합금에 대하여는 수정 없이 고순도 시료만으로 1~2% 상대오차 범위 내에서 정량분석이 가능하였고, Au-Cu 합금의 경 우에는 고순도 시료만을 표준시료로 사용하여서는 정량 분석이 불가능하였고 실험적인 수정 인자를 사용한 경우 1~2% 상대오차로 정량분석이 가능하였다. Au-Cu 합금의 경우 여러 조성이 표준시료가 없는 경우 이론적인 수정인자를 사용하는 경우 10%의 상대오차로 정량 분석이 가능하였다. Co-Ni 합금을 SIMS 분석하였을 때 Co와 Ni의 이차이온 세기의 비가 넓은 농도 범위에서 각 성분의 농도의 비와 직선관계를 가져 SIMS에 의한 합금의 정량분석 이 가능하였다. 또한 VAMAS-SCA Japan Project의 XPS 공동분석의 예비 결과도 주어져 있다.