• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.585-585
• /
• 2012

$Cu(In_{1-x}Ga_x)Se_2$(CIGS) 박막 태양전지는 Chalcopyrite 계 박막 태양전지로 Cu, In, Ga, Se 각 원소의 조성을 적절히 조절하여 박막을 성장시킨다. 성장시킨 CIGS 박막은 광흡수계수가 $10^5cm^{-1}$로 다른 물질보다 뛰어나고 직접 천이형 반도체로서 얇은 두께로도 고효율의 박막 제작이 가능하다. CIGS 태양전지를 제조하는 방법은 3-stage 동시 증착법, 금속 전구체의 셀렌화 공정법, 전기 증착법 등이 있다. 그 중에 금속 전구체의 셀렌화 공정법은 다른 제조 방법에 비해 대면적 생산에 유리한 장점이 있다. 하지만 아직 상대적으로 3-stage 동시 증착법에 비해 낮은 에너지 변환 효율이 보고된다. 본 실험에서는 기존의 금속 전구체의 셀렌화 공정법과는 달리 전구체 증착과 셀렌화 공정을 동시에 하고, Se cracker를 통하여 Se 원료를 주입하는 방식인 반응성 스퍼터링 공정에서 reservoir zone의 온도 변화에 따른 특성을 분석하였다. Se cracker의 reservoir zone 온도가 증가할수록 Cu/(In+Ga) 비가 증가한다. CIGS 박막 태양전지의 구조는 Al/Ni/ITO/i-ZnO/CdS/CIGS/Mo/Soda lime glass이다. CIGS 박막의 조성비가 Cu/(In+Ga)=0.89, Ga/(In+Ga)=0.17인 박막 태양전지에서 개방전압 0.34 V, 단락전류밀도 $32.61mA/cm^2$, 충실도 56.2% 그리고 변환 효율 6.19%를 얻었다. 본 연구는 2011년도 지식경제부의 재원으로 한국에너지 기술평가원(KTEP)의 지원을 받아 수행한 연구 과제입니다(No.20093020010030).

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.326-331
• /
• 2006

In the present study, we examined biosorption characteristics of heavy metals onto the extracellular polysaccharide (EPS) produced by the purple nonsulfur photosynthetic bacteria Rhodopseudomonas sp. KH4, which was isolated from a stream in Anyang, Kyonggi-Do. When Cd (100 mg/L) and Cu (100 mg/L) were added to EPS (1.0 g/L) in the optimal condition (Cd; pH 8, Cu; pH 5, $40^{\circ}C$), 84.2 mg/L of Cd and 70.0 mg/L of Cu were adsorbed within 30 min and 10 min, respectively. When 100 mg/L of Cd and Cu were present as mixture, 16.8 mg/L of Cd and 48.7 mg/L of Cu were adsorbed at $25^{\circ}C$, pH 5. The maximum adsorption capacity determined by fitting Langmuir isotherms model was suitable for describing the biosorption of Cd (76.9 mg/g) and Cu (67.1 mg/g) by EPS. The neutral monosaccharide in the EPS determined by GC consisted of arabinose (2.4%), glucose (7.1%) and mannose (90.5%).

• 보존과학연구
• /
• s.28
• /
• pp.121-147
• /
• 2007

A large variety of mineral pigments has been used for Korean paintings and it has known that organic pigments have been used together on the Buddhist painting and the portrait. Haehakbando-do, which is from Honolulu Academy Museum in the United States, 12-fold screen was commissioned by Court of the late Joseon Dynasty in order to pray for the King's longevity. Therefore, it seems that all material used including pigments were selected very carefully and a great deal of technical effort was gone into its process. The purposes of this research were to estimate the pigments and the contributory elements of each color used on Haehakbando-do, in accordance with the conservation treatment carried out by Gochang Conservation Institute throughout last year. Without extracting sample, property of pigment was measured by nondestructive method, X-ray spectral analysis, and by comparing with the data about ancient pigments. In spite of the limited range of pigment analysis by nondestructive method, it should be noted that this method would not cause damage to the cultural properites. White pigment was found in all colored parts except the background, so it can be suggested that white color was used as a grounding of other color pigments. This would be flake white[$2PbCO_3{\cdot}Pb(OH)_2$] as Pb was found. Pb was the only element could be found in yellow, however, it can be organic pigment like Gamboge as same as background. Red would be Cinnabar (HgS) as hydrargyrum (Hg) was detected. For the light purple in cloud, organic pigments were probably used since any element is not detected except for Pb, which is used for background. It is possible that green color is the mixture of Malachite[$CuCO_3{\cdot}Cu(OH)_2$] and Azurite [$2CuCO_3{\cdot}Cu(OH)_2$], which share Cu as their main element. Azurite[$2CuCO_3{\cdot}Cu(OH)_2$] was used for bluish pigments. Black is carbon compound. For gold, solid gold (Au) was detected. It shows that gold was gilded on the flake white background. Red painted on the frame of screen was identified as Cinnabar (HgS) and the gold pattern was solid gold (Au). The supporting leg of folding screen was made of brass because both copper and zinc were detected. In conclusion, white pigment was used as grounding of all colors of Haehakbando-do, and specific pigments were used for each color. Additionally, result from the analysis of several pigments shows that mineral pigment and organic pigment, or different mineral pigments were mixed to make various colors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.25-25
• /
• 2010

Cu(In, Ga)$Se_2$ (CIGS), $CuInS_2$ (CIS) 등의 Se, S계 화합물 박막 소재를 활용한 태양전지는 높은 광흡수 계수, 상대적으로 높은 효율, 화학적 안정성, 도시적인 미관 등으로 인하여 최근 부각되고 있다. 하지만 CIGS, CIS 등의 Se, S계 박막 소재는 상대적으로 매장량이 적은(희유 원소) In, Ga을 사용하고 있는 약점이 있으며 특히 In의 경우는 LCD Display에 사용되는 ITO 필름으로 인해 가격이 상승하고 있다. 따라서 결정질 실리콘 태양전지의 경험에서와 같이 생산량의 급증에서 기인하는 소재 부족 문제를 미연에 방지하고 안정적인 성장을 이루기 위해서는 희유 원소인 In과 Ga을 저가 범용원소로 대체 하는 기술을 추가적으로 개발해야 한다. $Cu_2ZnSnS_4$ (CZTS) 박막 태양전지는 Se, S계 태양전지에서 III 족 원소인 In, Ga을 II-IV 원소인 Zn와 Sn으로 대체하는 기술로 기존의 CIGS계 태양전지가 보유하고 있는 장점을 유지하면서 저가 태양전지를 구현할 수 있는 대체 물질로 최근 많은 관심을 받고 있다. CZTS 박막 태양전지 관련 세계 기술동향 조사에 따르면, 최근 2008년에 일본 Nagaoka 대학의 Katagiri 그룹에서 스퍼터를 이용하여 제조한 CZTS 박막 태양전지의 최고 효율이 6.77%가 됨을 보고하였고, 2010년 초에는 IBM에서 스핀코팅법을 이용하여 제조한 CZT(S, Se) 박막 태양전지의 효율을 9.66%까지 올릴 수 있음을 Advanced Materials에 보고하였다. 본 발표에서는 우선 CZTS 박막태양전지 제조 및 특성 분석 관련 개요 및 세계 기술 개발 동향 분석 결과를 설명할 것이다. 또한 본 실험실, 에너지 기술 연구원 및 KIST, 영남대 등 국내에서 진행되고 있는 CZTS 관련 기술 개발 현황에 대하여 설명할 것이다.

• Korean Journal of Materials Research
• /
• v.28 no.8
• /
• pp.435-439
• /
• 2018

MA Al alloys are examined to determine the effects of alloying of Mg and Cu and rolling on tensile deformation behavior at 748 K over a wide strain rate range($10^{-4}-10^3/s$). A powder metallurgy aluminum alloy produced from mechanically alloyed pure Al powder exhibits only a small elongation-to-failure(${\varepsilon}_f$ < ~50%) in high temperature(748 K) tensile deformation at high strain rates(${\acute{\varepsilon}}=1-10^2/s$). ${\varepsilon}_f$ in MA Al-0.5~4.0Mg alloys increases slightly with Mg content(${\varepsilon}_f={\sim}140%$ at 4 mass%). Combined addition of Mg and Cu(MA Al-1.5%Mg-4.0%Cu) is very effective for the occurrence of superplasticity(${\varepsilon}_f$ > 500%). Warm-rolling(at 393-492 K) tends to raise ${\varepsilon}_f$. Lowering the rolling-temperature is effective for increasing the ductility. The effect is rather weak in MA pure Al and MA Al-Mg alloys, but much larger in the MA Al-1.5%Mg-4.0%Cu alloy. Additions of Mg and Cu and warm-rolling of the alloy cause a remarkable reduction in the logarithm of the peak flow stress at low strain rates (${\acute{\varepsilon}}$< ~1/s) and sharpening of microstructure and smoothening of grain boundaries. Additions of Mg and Cu make the strain rate sensitivity(the m value) larger at high strain rates, and the warm-rolling may make the grain boundary sliding easier with less cavitation. Grain boundary facets are observed on the fracture surface when ${\varepsilon}_f$ is large, indicating the operation of grain boundary sliding to a large extent during superplastic deformation.

• Journal of the Korean Ceramic Society
• /
• v.33 no.2
• /
• pp.127-134
• /
• 1996

The thermal residual stresses were estimated for brazed Si3N4/S.S.316 joints with Cu/Mo multi-interlayers using FEM, and their bending strengths at room temperature were measured for various interlayer configura-tions. The Cu, Mo multi-interlayer decreased the maximum residual stress in Si3N4 and caused the residual stress redistribution rsulting in the high residual stress at Mo interlayer. The stress distribution in the joints as well as the maximum residual stress in silicon nitride were found to be main factors for determining bending strengths and Weibull modulous of the joints. The bending strength of the brazed Si3N4/S.S.316 joints with specific Cu, Mo multi-interlayer system were found to be above 400 MPa.

• YAKHAK HOEJI
• /
• v.9 no.1_2
• /
• pp.18-22
• /
• 1965

A new organic reagent, 1-isonicotinoyl-2-furfurylidene hydrazine was synthesized from isonicotinic acid hydrazide and furfural, gives precipitate with copper(II), mercury(II) and argent(I), whereas, it gives a water soluble yellow complex with iron(III). Copper complex of the reagent is soluble in EtOH MtOH, pyridine, dioxane and dimethylformamide with green yellow coloration. The complex has a maximum absorption at 385 m.$\mu$ and molar ratio of copper; reagent was estimated as 1:1 by continuous variation method, slop method and chelate titration method. Molar extinction coefficient (9600) and apparant formation constant of this complex was spectrophotometrically determined. K=1.7 * $10^{7}$ (Babko's method) K=2.1 * $10^{7}$ (Anderson's method). This reagent reacted with copper so sensitive that it would be available for determination of Cu (II).

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.855-861
• /
• 2013

Small-pore Cu-chabazite SCR catalysts with high NOx conversion at low temperatures are of interest for marine diesel engines with exhaust temperatures in the range of 150 to $300^{\circ}C$. Unfortunately, fuels for marine diesel engines can contain a high level of sulfur of up to 1.5% by volume, which corresponds to a $SO_2$ level of 500 ppm in the exhaust gases for an engine operating with an A/F ratio of 50:1. This high level of $SO_2$ in the exhaust may have detrimental effects on the NOx performance of the Cu-chabazite SCR catalysts. In the present study, a bench-flow reactor is used to investigate the effects of sulfur poisoning on the NOx performance of Cu-chabazite SCR catalysts. The SCR catalysts were exposed to simulated diesel exhaust gas stream consisted of 500 ppm $SO_2$, 5% $CO_2$, 14% $O_2$, 5% $H_2O$ with $N_2$ as the balance gas at 150, 200, 250 and $300^{\circ}C$ for 2 hours at a GHSV of 30,000 $h^{-1}$. After sulfur poisoning the low-temperature NOx performance of the SCR catalyst is evaluated over a temperature range of 150-$300^{\circ}C$ to determine the extent of the catalyst deactivation. Desulfation is also carried out at 600 and $700^{\circ}C$ for 30 minutes to determine whether it is possible to recover the NOx performance of the sulfur-poisoned SCR Catalysts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.288-289
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator application, PMN-PZN-PZT ceramics were manufactured as a function of the amount of CuO addition and their dielectric and piezoelectric characteristics were investigated. With the amount of CuO addition, the physical characteristics of specimens decreased. The specimens showed the optimum value at 0.5wt%CuO addition. Their optimum values were density=$7.93g/m^3$, ${\varepsilon}_r$=1398, kp=0.560, Qm=1706, $d_{33}$=327pC/N, respectively.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.