• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.363-368
• /
• 2006

$C_9$-알데히드를 수소화하여 $C_9$-알콜을 제조하는 공정에 사용하기 위한 최적의 촉매를 선정하고, $C_9$-알콜의 수율을 극대화하기 위한 운전 조건을 확립하기 위한 실험을 수행하였다. 구리 전구체로 acetate를 사용하고 침전제로 $Na_2CO_3$를 사용하여 제조한 $CuO/ZnO/Al_2O_3$(60:30:10 wt％) 촉매의 표면적 및 구리 비표면적이 가장 우수하였으며 $C_9$-알데히드 수소화 반응에서도 가장 우수한 성능을 보였다. 최적화된 촉매를 장착한 trickle bed 반응기를 사용하여 $175^{\circ}C$, 800 psi, $WHSV=3hr^{-1}$의 조건에서 94.1 wt％의 $C_9$-알콜 수율을 얻었다. 알데히드의 수소화 반응에 사용되는 다른 촉매들과 비교한 결과 Ni/kieselghur 촉매와 유사한 성능을 보였으며 $Cu-Ni-Cr-Na/Al_2O_3$ 촉매 및 $Ni-Mo/Al_2O_3$ 촉매의 경우보다 우수한 성능을 보이는 것을 확인하였다. 장기 촉매 테스트를 통해서 촉매의 안정성을 확인한 결과 약 72시간 이후에는 고비점 부산물의 생성량 증가로 인하여 $C_9$-알콜의 수율이 약간씩 감소하였다.

• Journal of Welding and Joining
• /
• 제10권3호
• /
• pp.63-72
• /
• 1992

The joining methods of ceramics to metals which can be expected to obtain high temperature strength are mainly classified into the solid-state diffusion bonding method and the active brazing method. Between these two, the solid-state diffusion bonding method is given attentions as substituting method for active brazing method due to being capable of obtaining higher bonding strength at high temperature and accurate bonding. In this paper, the solid-state diffusion bonding of $Al_{2}$O$_{3}$ ceramics to Ni-Cr-Mo alloy steel (SNCM21) using insert metal was carried out. The insert metal employed in this study was experimentally home-made, Ag-Cu-Ti alloy. Influence of several bonding parameters of $Al_{2}$O$_{3}$SNCM21 joint was quantitatively evaluated by bonding strength test, and microstructural analyses at the interlayer were performed by SEM/EDX. From above experiments, the optimum bonding condition of the solid-state diffusion bonding of $Al_{2}$O$_{3}$/SNCM21 using Ag-Cu-Ti insert metal was determined. Futhermore, high temperature strength and thermal-shock properties of $Al_{2}$O$_{3}$/SNCM21 joint were also examined. The results obtained are as follows. 1. The maximum bonding strength was obtained at the temperature of 95% melting point of insert metal. 2. The high temperature strength of $Al_{2}$O$_{3}$/SNCM21 joint appeared to bemaximum value at test temperature 500.deg.C and the bonding strength with increasingtemperature showed parabolic curve. 3. The strength of thermal-shocked specimens was far deteriorated than those of as-bonded specimens. Especially, water-quenched specimen after heated up to 600.deg. C was directly fractured in quenching.

• 한국환경보건학회지
• /
• 제9권2호
• /
• pp.75-81
• /
• 1983

The Biochemical Oxygen Demand(BOD) indicates that microbes are proliferating or that oxygen is being spent by breathing action when examining water under the same aerobic condition. In this research of the mesurement of BOD are the poisonous elements of heavy metal ions such as Cu-ion, Cr-ion, Pb-ion and Zn-ion. They exert an unfavorable influence in the analysis of BOD and research was performed to provide certain data of minimum negative influence by the poisonous matters. The results of the research confirm that heavy metal ion(Cu, Cr, Pb, Zn) do direct an influence upon the normal growth of aerobic microbes in actual tests of chemical analysis of portable water or sewage. The most critical concentration for a negative effect on lowering oxygen quantity and disturbing the aerobic mocrobes normal growth was found to be 0.01 mg/l. Therefore, test results are not valid if the heavy metal concentration is to or greater than 0.0mg/l, To improve comprehension through out the research the author uses the following abbreviations: 1. The Cu-ion is to be excluded before experimental analysis if it is over 0.01mg/l inorder to obtain a real value for the BOD. 2. The Cr-ion is to be excluded before experimental analysis if it is over 0.01mg/l in order to obtain a real value for the BOD. 3. The Pb-ion is to be excluded before experimental analysis if it is over 0.01mg/l in order to obtain a real value for the BOD. 4. The Zn-ion is to be excluded before experimental analysis if it is over 0.01mg/l in order to obtain a real value for the BOD.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.137-141
• /
• 2005

Spinel계 유화물 $Zn_xFe_{1-x}Cr_2S_4$(x=0.05, 0.1, 0.2)에 대하여 X선 회절법, 자기저항측정, $M\ddot{o}ssbauer$ 분광법을 이용하여 CMR 특성과 자기적 성질을 연구하였다. 결정구조는 상온에서 입방정으로 정상 spinel 구조를 갖는 것으로 나타났다. 자기저항 실험결과 160K 부근 이하에서는 반도체적 전기전도 특성을 보이며, Curie 온도부근에서 최대자기저항 온도가 나타났다. Zn 조성값이 증가함에 따라 Jahn-Teller 효과에 의한 완화 현상이 증가되었으며, 전기 사중극자 이동값 역시 증가되고, 초미세 자기장값은 감소하였다. CMR 특성은 heterovalency에 의한 이중교환 상호작용이나, $Fe^{2+}$와 $Cr^{3+}$ 그리고 $Fe^{3+}$ 사이의 삼중교환 상호작용과는 다른 동적 Jahn-Teller 효과에 의한 도체-반도체전이와 절반 금속성 에너지 밴드구조에서 스핀전자 전이에 의하여 발생되는 것으로 예측된다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권1호
• /
• pp.1-9
• /
• 1997

We investigated the depth profiles of heavy metals in the surface sediments at Heedong reservoir in Pusan. Sampling was done at the intervals of 50 m of drift along the water channel into the reservoir. All samples were analyzed with an ICP-AES. We determined the content of Zn, Pb, Cd, Mn, Cu, Cr, and Fe. The overall mean content of these heavy metals were observed to $(2.9\pm1.2){\times}10^{-3},\;(1.3\pm0.7){\times}10^{-3},$ $(1.9\pm2.1){\times}10^{-4},$ $(2.3\pm1.1){\times}10^{-2},\;(1.6\pm1.0){\times}10^{-3},\;and\;(4.5\pm2.6){\times}10^{-4}$ ppm/ppmFe, respectively excluding iron data. Mean contents of Cu show an increasing trend toward the surface of sediments, while those of Cd show a decreasing trend, and those of Pb and Cr are relatively stable. Comparing with the contents of heavy metals in soils at two sites of Kumjeong mountain, enrichment factors of heavy metals in the surface sediments were determined. Among heavy metals we investigated, copper showed the largest value of enrichment factor. Considering the maximum content of heavy metals in the surface sediment, the values of enrichment factors of Cu, Cd and Cr were significant, which were 22, 8.1 and 4.0, respectively. In leaching experiment, it appeared that Pb, Cd, Cr, and Fe in sediments were hardly leached out into water, We also examined the effect of pH on the content of heavy metals.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.43-48
• /
• 2013

Chalcogenide $Fe_{0.9}M_{0.1}Cr_2S_4$(M=Co, Ni, Zn)에 대하여 X-선 회절법, 자기저항측정, Mossbauer 분광법을 이용하여 CMR특성과 자기적 성질을 연구하였다. 10 at%의 M 치환에서는 상온에서 입방정으로 정상 spinel 구조를 갖는 것으로 나타났다. 자기저항 실험결과 $T_C$ 부근에서는 도체-반도체 전이의 특성을 보이며 최대자기저항 온도가 나타났다. M$\ddot{o}$ssbauer 분광 실험 결과에서 Fe에 대한 Ni 치환은 초교환 상호작용을 강화시키고 Jahn-Teller 효과에 의한 완화 현상의 심화를 보여준다. CMR 특성은 망간산화물의 $Mn^{3+}$와 $Mn^{4+}$ 사이의 이중교환상호작용과 다르게 동적 Jahn-Teller 효과와 관계된 polaron에 기인한 도체-반도체 전이 의한 것으로 해석된다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.99-101
• /
• 1999

To improve the texture and the hardness of Ni substrates, we added impurities such as Mn, Fe, Co, Cu and Cr and investigated the effect of impurities on the texture and the hardness of Ni tapes. The Ni tapes with 0.2% Co, Cr, Cu, showed poor in-plane textures. However, the Ni tapes with 0.1 ${\sim}$ O.2% Mn (or Fe), showed much better textures. We'll describe the detailed effects of the amount of Mn impurities.

• 대한화장품학회지
• /
• 제40권2호
• /
• pp.203-214
• /
• 2014

시중에 유통 중인 산화형 염모제 28건을 대상으로 접촉성피부염 유발 성분 함량 조사를 수행하여, 관련분야에 기초자료를 제공하고자 본 연구를 수행하였다. 접촉성피부염을 유발하는 물질로 산화염료 10종(p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol)과 중금속 4종(니켈; Ni, 크롬; Cr, 코발트; Co, 구리; Cu)을 선정하였다. 10종의 접촉성피부염 유발 산화염료의 함량조사를 위하여 헥산-2% 아황산나트륨을 이용하여 빠르고 간단하게 시료전처리를 하였고, 초고성능액체크로마토그래피를 이용하여 분석시간이 12 min으로 짧은 동시분석조건을 확립하였다. 분석 결과 10종의 산화염료 성분은 제품에 표기된 성분이 모두 확인되었고, 각 성분의 농도는 의약품등 표준제조규정에 제시된 사용할 수 있는 농도상한 이하로 나타났다(식품의약품안전처 고시 제2013-228호). 또한, 4종의 중금속성분을 확인하기 위하여 microwave를 이용하여 시료를 분해하였고, 유도결합플라즈마분광계를 이용하여 정량 분석하였다. 각 제품에서 중금속별 검출량은 Ni 0.572 ${\mu}g/g$, Cr 3.161 ${\mu}g/g$, Co 2.029 ${\mu}g/g$, Cu 0.420 ${\mu}g/g$이었다. 염모제의 성상별 중금속 농도를 비교한 결과 분말타입(헤나) 염모제의 평균 중금속 농도는 Ni 1.800 ${\mu}g/g$, Cr 10.127 ${\mu}g/g$, Co 7.082 ${\mu}g/g$, Cu 1.451 ${\mu}g/g$로 거품타입이나 크림타입 보다 높았다. 염모제를 흑색, 흑갈색, 갈색, 짙은 갈색, 옅은 갈색, 붉은 갈색의 6개 색상으로 구분하여 분석한 결과, 갈색의 경우 Co 농도가 가장 높고 나머지 색상에서는 모두 Cr의 농도가 높은 것을 알 수 있었다.

• KSBB Journal
• /
• 제11권2호
• /
• pp.173-180
• /
• 1996

S. CereVlSWe를 이용하여 Pb 이온의 흡착 능력을 조사하였다. 살아있는 S. CereVlSWe 및 멸균된 S. cereVlswe 보다 건조분쇄 된 S. cerevisiae가 Pb 흡착 능력이 가장 좋았다. 통일의 중금속 농도에서 중금 속 단위 흡착량은 미생물 농도가 높아짐에 감소하였다. 살아있는 S. cereVlsiae의 흡착 능력 순서는 Pb > >Cu> Cd = Co>Cr > Zn = Ni순이었다. 중금속 흡 착에서 0.1 M NaOH로 24시간 전처리하여 흡착량을 1.5배 증가시킬 수 있었다. 0.1 M HCl 및 0.1 M $H_2S_O4$ 로 Pb이온을 효과적으로 탈착시킬 수 있었다. Pb 이온의 흡착평형은 Freundlich 흡착등온식과 Langmuir 흡착등온식으로 설명할 수 있었다.

• 자원환경지질
• /
• 제56권6호
• /
• pp.745-764
• /
• 2023

In the Republic of Congo, Banded iron formations (BIFs) occur in two areas: the Chaillu Massif and the Ivindo Basement Complex, which are segments of the Archean Congo craton outcropping in the northwestern and southwestern parts of the country. They show interesting potential with significant mineral resources reaching 2 Bt and grades up to 60% Fe. BIFs consist mostly of oxide-rich facies (hematite/magnetite), but carbonate-rich facies are also highlighted. They are found across the country within the similar geological sequences composed of amphibolites, gneisses and greenschists. The Post-Archean Australian Shale (PAAS)-normalized patterns of BIFs show enrichment in elements such as SiO₂, Fe₂O₃, CaO, P₂O₅, Cr, Cu, Zn, Nb, Hf, U and depletion in TiO₂, Al₂O₃, MgO, Na₂O, K₂O, Sc, Th, Ba, Zr, Rb, Ni, V. REE diagrams show slight light REEs (rare earth elements; LREEs) compared to heavy REEs (HREEs), and positive La and Eu anomalies. The lithological associations, as well as the very high (Eu/Eu^*)_SN ratios> 1.8 shown by the BIFs, suggest that they are related to Algoma-type BIFs. The positive correlations between Zr and TiO₂, Al₂O₃, Hf suggest that the contamination comes mainly from felsic rocks, while the absence of correlations between MgO and Cr, Ni argues for negligeable contributions from mafic sources. Pr/Pr^* vs. Ce/Ce^* diagram indicates that the Congolese BIFs were formed in basins with redox heterogeneity, which varies from suboxic to anoxic and from oxic to anoxic conditions. They were formed through hydrothermal vents in the seawater, with relatively low proportions of detrital inputs derived from igneous sources through continental weathering. Some Congolese BIFs show high contents in Cr, Ni and Cu, which suggest that iron (Fe) and silicon (Si) have been leached through hydrothermal processes associated with submarine volcanism. We discussed their tectonic setting and depositional environment and proposed that they were deposited in extensional back-arc basins, which also recorded hydrothermal vent fluids.