• Applied Microscopy
• /
• v.24 no.4
• /
• pp.132-144
• /
• 1994

The application of TEM in investigating the evolution of microstructure during solid phase crystallization of the amorphous Si, $Si_{1-x}Ge_x,\;and\;Si_{1-x}Ge_x/Si$ films deposited on $SiO_2$ substrate, in identifying the failure mechanism of the TiN barrier layer in the Cu-metallization scheme, and in comparing the microstructure of the as-deposited Cu-Cr and Cu-Ti alloy films are discussed. First, it is identified that the evolution of microstructure in Si and $Si_{1-x}Ge_x$ alloy films strongly depends on the concentration of Ge in the film. Second, the failure mechanism of the TiN diffusion barrier in the Cu-metallization is the migration of the Cu into the Si substrate, which results in the formation of a dislocation along the Si {111} plane and precipitates (presumably $Cu_{3}Si$) around the dislocation. Finally, the microstructure of the as-deposited Cu-Cr and Cu-Ti alloy films is also quite different in these two cases. From these several cases, we demonstrate that the information which we obtained using TEM is critical in understanding the behavior of materials.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.25-40
• /
• 2001

In order to investigate the degree of heavy metal pollution, 280 urban gully-pot sediments were collected from 13 localities in eastern part of Seoul. The uncontaminated stream sediments were also studied for comparison. A series of studies have carried out concerning the physicochemical characteristics of the sediments and the distribution of Cd, Co, Cr, Cu, Ni, Pb, and Zn. Total metal concentrations of gully-pot sediments and uncontaminated stream sediments were analyzed using acid extraction. After predigestion with $NHO_3$, the sample was digested with mixed acid ($NHO_3$-$HClO_4$). The gully-pot sediments were characterized by very high concentrations of Zn, Cu, Pb and Cr, indicating an anthropogenic contribution of these metals to the sediment chemistry Heavy metal concentrations in the gully-pot sediments were 1-329 times higher than the mean content of metals in the uncontaminated stream sediments, depending on the metals. In particular, the highest mean concentrations of Zn, Cu, Pb and Cr were noticed in the gully-pot sediments from Yeouido, Junggu, Junggu, and Dongdaemungu, respectively. The mean value of total Zn concentration in the business and commercial areas is 2-3.5 times higher than that in industrial areas. This suggests that Zn is mainly derived from automobiles (rubber of automobile tires). The mean concentrations of Cu and Cr are significantly high in the commercial and industrial areas, indicating that industrial activities may cause the accumulation of Cu and Cr in the sediments. The Pb level in gully-pot sediments is comparatively low, due to the use of unleaded gasoline in automobiles since 1987.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.85-91
• /
• 1999

$H:LiNbO_3$ optical modulator with Cu/parylene electrode layer, which has a merits in the bandwidth, power consumption and fabrication conditions as compared with conventional Au/Cr/$SiO_2$, is proposed and fabricated. Analysis and design of optical modulator is performed by finite element calculation. Various unit processes for fabricating the proposed modulator, 1550nm $H:LiNbO_3$ optical waveguide, parylene buffer layer, and CPW Cu electrode, were developed, After dicing and end-face polishing of fabricated modulator chip, optical modulation responses as sawtooth electrical driving voltage has been measured at low frequencies. Properties of optical waveguide had not been changed before and after Cu/parylene electrode processes, which make confirm the reproducible fabrication of optical modulator.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.425-430
• /
• 1994

The effect of inhibitors and catalysts in the synthesis of 2-hydroxyethyl methacrylate(2-HEMA) was studied. As catalysts, triethylamine(TEA), $FeCl_3{\cdot}6H_2O$, $Cu(NO_3)_2{\cdot}2H_2O$, $AlCl_3$, $Na_2Cr_2O_7$were selected. p-Methoxyphenol (PMP) of aq. $NaNO_3$ solution was used as an inhibitor in polymerization. in aq. $NaNO_3$ inhibitor system, triethylamine (TEA), $FeCl_3{\cdot}6H_2O$, and $Na_2Cr_2O_7$, showed good catalytic effects. When p-methoxyphenol(PMP) was used as a polymerization inhibitor, the reaction was very sluggish and noneffective because the metal ion such as $Fe^{3+}$ or $Cr^{6+}$ was reduced by PMP. On the contrary, when aq. $NaNO_3$ was used as an inhibitor in polymerization, the reaction was very fast without deactivation of the metal catalysts.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.22-29
• /
• 2006

The purpose of this study was to investigate the dyeability and antibacterial activity on wool fabric dyed with cochineal at variable dyeing conditions. Al, Cr, Fe, Cu and Sn were used as mordants and adsorption was compared with different mordanting methods. The optimum dyeing conditions of wool fabrics were dyeing concentration 2.0%(o.w.s), dyeing temperature $60^{\circ}C$, pH 3 and dyeing time 30 minutes. The pre-mordanting method was preferred for Al and Cr, and the post-mordanting one was preferred for Cu, Sn and Fe to achieve better dyeing. The optimum mordanting conditions of wool fabrics dyed with cochineal were mordanting concentration of 1%(o.w.s), mordanting temperature $60^{\circ}C$, and dyeing time 30 minutes. Wool fabrics dyed with cochineal showed a little antibacterial activity, but it was increased by Cu and Sn mordanting. The light fastness and perspiration fastness of wool fabric treated with cochineal were improved by mordanting.

• Journal of Environmental Science International
• /
• v.22 no.8
• /
• pp.945-951
• /
• 2013

Alumina-supported catalysts containing different transition metals such as Cu, Cr, Mn, Zn, Co, W were investigated for their activity in the selective oxidation of toluene. Catalytic oxidation of toluene was investigated at atmospheric pressure in a fixed bed flow reactor system over transition metals with $Al_2O_3$ catalyst. The result showed the order of catalytic activities for the complete oxidation of toluene was Mn > Cu> Cr> Co> W> Zn for 5wt.% transition $metals/Al_2O_3$. $Mn/Al_2O_3$ catalysts containing different amount of Mn were characterized by X-ray diffraction spectroscopy for decision of loading amount of metal to alumina. 5 wt.%$Mn/Al_2O_3$ catalyst exhibits the highest catalytic activity, over which the toluene conversion was up to 90% at a temperature of $289^{\circ}C$.

• Korean Journal of Crystallography
• /
• v.16 no.1
• /
• pp.38-42
• /
• 2005

The crystal structure of Bis(ethylenediamine) cuprate(II)$\cdot$dichromate, $Cu(C_2H_8N_2)_2{\cdot}Cr_2O_7$, has been determined by X-ray crystallography. Crystal data: a=5.682(2), b=8.567(3), c=14.839(3) ${\AA},\;{\alpha}=97.50(2),\;{\beta}=101.06(1),\;{\gamma}=109.38(2)^{\circ}$ Triclinic, P-1 (SG No=2), Z=2, V=653.9(2) ${\AA}^3,\;D_c=2.030gcm^{-3},\;{\mu}=3.273mm^{-1}$. The structure was solved by Patterson method and refined by full matrix least-square methods uslng unit weights. The final R and S values were $R_1=0.0256,\;R_w=0.0708,\;R_{all}=0.0316,\;S=1.151$ for the observed 2291 reflections. The two cupper complex ion has the usual distorted octahedral structure with mean four Cu-N distances of 2.010(3) $\AA$ and the longer mean Cu-O distance of 2.525(2) $\AA$. The Cu-complex and dichromate ions are linked to form infinite chain arranged alternatively along the [111]-direction. The neighboring chains in the (0-11) plane are connected with N1-O5 and N3-O1 hydrogen bonds.

• Journal of Environmental Science International
• /
• v.26 no.3
• /
• pp.303-309
• /
• 2017

Aeration with low energy micro-bubble generation and $UV/H_2O_2$ processes was introduced to verify the possibility of oxidation treatment for acid mine drainage. During 10 hours of aeration with micro-bubbles, Fe and As concentrations were decreased to 18.1 and 61.8%, respectively, while Cu, Cd, Al were kept at influent concentrations. Other heavy metals such as Mn, Cr, Pb, Zn, and Ni concentrations fluctuated due to the repetition of oxidation and release. Twenty days of aeration indicated the oxidation possibility for Cu, Cd, and Al. With the employment of $UV/H_2O_2$ processes, more than 77% of Cu and Fe removed, whereas slightly more than 30% of Cd and Al removed.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.107-117
• /
• 2007

Dispersion characteristics and envirounmental impactes of the stream sediments were investigated and geochemical disaster in the Namhae-Hwagye area was predicted. Stream sediments having no possibility of contamination effect and representing drainage basins were collected. Major and hazardous elements concentrations were determined by XRF, ICP-AES and NAA analysis methods. Acid decomposition for the ICP-AES have been used $HClO_4$ and HF with $200^{\circ}C$ heating at 1'st and after that $HClO_4$, HF and HCl with $200^{\circ}C$ heating at 2'nd stage. Hazardous elements concentrations for the stream sediments in the Namhae area were Cu $5.66{\sim}168\;ppm$, Pb $18.0{\sim}40.7\;ppm$, Cr $21.6{\sim}147\;ppm$, Co $4.86{\sim}25.3\;ppm$. Hazardous elements concentrations for the stream sediments in the Hwagye area were Cu $16.4{\sim}41.2\;ppm$, Pb $26.5{\sim}37.5\;ppm$ Cr $79.6{\sim}153\;ppm$, Co $15.7{\sim}29.5\;ppm$. Concentration of Cu and Co in the stream sediments show a negative correlation with $SiO_2$ in all study area. According to E.I.(Enrichment Index) of stream sediments was not enriched in study area. And average E.I. was 0.35 (Namhae) and 0.56 (Hwagye) respectively. The stream sediments were enriched as in order of Pb > Cr > Co > Cu. And the average of Enrichment Factor (E.F.) was 0.46 to 2.84, respectively. E.F. concentration of Cu and Co were nearly similar enrichment characteristic but E.F. concentration of Cr were higher enrichnent characteristic in Namhae than Hwagye area. Pb was highly enriched in all study area but the tolerable level that used to investigate the enrichment degree of hazardous elements, was not exposed to harmful hazardous elements.

• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.707-718
• /
• 2011

We study the natural background and geochemical characteristics on geological groups of stream sediment in the Boseong-Hwasun area. We collected 186ea stream sediment samples along the primary channels and dried them naturally in laboratory. The contents of major, trace and rare earth elements were determined by XRF, ICP-AES and NAA analysis methods. In order to know the natural background and geochemical characteristics of geological groups, we classified the studied area into granitic gneiss (GGn) area and porphyroblastic gneiss (PGn) area. The contents range of major elements for GGn area is $SiO_2$ 45.5-73.09 wt.%, $Al_2O_3$ 12-20.76 wt.%, $Fe_2O_3$(T) 3.72-8.85 wt.%, $K_2O$ 2.38-4.2 wt.%, MgO 0.75-2.77 wt.%, $Na_2O$ 0.78-1.88 wt.%, CaO 0.27-2.1 wt.%, $TiO_2$ 0.56-1.72 wt.%, $P_2O_5$ 0.06-0.73 wt.% and MnO 0.03-0.95 wt.%, and for PGn area it is $SiO_2$ 43.74-70.71 wt.%, $Al_2O_3$ 11.54-25.05 wt.%, $Fe_2O_3$(T) 3.44-13.46 wt.%, $K_2O$ 2.08-3.86 wt.%, MgO 0.65-2.99 wt.%, $Na_2O$ 0.63-1.7 wt.%, CaO 0.35-2.07 wt.%, $TiO_2$ 0.68-4.17 wt.%, $P_2O_5$ 0.1-0.31 wt.% and MnO 0.07-0.33 wt.%. The contents range of hazard elements for GGn area is Cr 41.7-242 ppm, Co 7.6-25.1 ppm, Ni 12-61 ppm, Cu 10-47 ppm, Zn 48.5-412 ppm, Pb 17-215 ppm, and for PGn area, it is Cr 29.6-454 ppm, Co 5.9-53.7 ppm, Ni 8.7-287 ppm, Cu 6.4-134 ppm, Zn 43.6-370 ppm, Pb 15-37 ppm area. There is a good correlation between Cr and MgO and Co among $Al_2O_3$, $Fe_2O_3$(T), MgO and Ni among $Fe_2O_3$(T), CaO, MgO whereas Cu, Zn and Pb have a low correlation for major elements in GGn area. Generally Cr, Co, Ni, and Cu have a good correlation with major elements, but a low correlation with Zn and Pb in PGn area.