• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.27-31
• /
• 2019

Large grain YBCO bulk superconductors are fabricated by the top-seeded melt growth (TSMG) or top-seeded infiltration growth (TSIG) method. Both growth methods use at least one of $YBa_2Cu_3O_{7-{\delta}}$, $Y_2BaCuO_5$, $BaCuO_3$ pre-reacted precursor powders. However, the synthesis of the pre-reacted powders includes multiple calcination runs which are cost-bearing and time-consuming. In this work, we report the successful growth of single-domain YBCO bulk superconductors directly by using the powder compact that has been pressed from the mixture of $Y_2O_3$, $BaCuO_3$ and CuO powders without any intermediate grinding step. Single-domain YBCO bulk superconductor has been also prepared by using $Y_2O_3$, $BaO_2$ and CuO powders without intermediate grinding step. Investigations on the trapped magnetic field and microstructure of the melt-processed specimen show that the elimination of the repeated processes of calcinations and pulverization has hardly affected on the crystal growth and the magnetic properties of the grown YBCO bulk superconductors. However, it is thought that the presence of residual carbon affects on the size of Y211 particles in melt-processed YBCO bulk superconductor.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.1 s.14
• /
• pp.55-61
• /
• 2002

The feasibility of an oil-free, motor-driven, two-stage centrifugal compressor supported by air bump bearings is investigated. This centrifugal compressor is driven by a 75 kW motor at an operating speed of 39,000 RPM, and a pressure ratio of the compressor is set up to 4. The analysis is performed by using bearing equilibrium position, heaving stillness, Campbell diagram, unbalance response, and stability. It is demonstrated in this paper that air bump bearings can be adopted well to an oil-free, motor-driven, centrifugal compressor. Specially, Cu-coated bump bearings have enough damping force to reduce a synchronous unbalance for rigid modes of the two-stage compressor. Futhermore, this concept may be applied to the flexible rotor system such as high speed turbomachinery with a super critical speed.

• The Journal of Engineering Geology
• /
• v.11 no.2
• /
• pp.175-190
• /
• 2001

This study investigates the existing theoretical backgrounds in order to examine the behavior of lateral flow according to the plasticity of soils when unsymmetrical surcharge is worked on polluted soft soils by comparing and analyzing the results measured through model tests. Model tests are canied out as follows soil tank, bearing frame and bearing plate are made. By increasing unsymmetrical surcharge to the ground soils with the consistent water content and with gradually increased polluted materials at intervals, the amounts of settlement, lateral displacement and upheaval were respectively observed. In conclusion, the value of critical surcharge was expressed as q$_{cr}$=2.78$_{cu}$ which was similar to those Tschebotarioff(q$_{cr}$=3.0$_{cu}$) and Meyerhof(q$_{cr}$=(B/2H+$\pi$/2)$_{cu}$) had been proposed. The value of ultimate capacity was expressed as q$_{ult}$=4.84$_{cu}$ which was similar to that of Prandtl. The lateral flow pressure is adeQuately calculated by the eQuation(P$_{max}$=K$_o$ r H) and the maximum value of lateral flow pressure is found near O.3H of layer thickness(H) and is higher to ground surface than the ones in composition pattern, Poulos distribution pattern and softclay soils (CL, CH) which is not polluted. The stability control method used in this research followed the management diagram of Tominaga.Hashimoto, Shibata.Sekiguchi, Matsuo.Kawamura who use the amounts of plasticity displacement by lateral flow. As a result, the ultimate capacity values in the diagram {S$_v$-(Y$_m$/S$_v$)} of Matsuo.Kawamura and in the diagram {(q/Y$_m$)-q} of Shibata. Sekiguchi were smaller than in the ones of load-settlement curve (q-S$_v$).

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.10a
• /
• pp.70-70
• /
• 2003

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.506-514
• /
• 2020

Objective: We tested the hypothesis that increasing dietary copper (Cu) to gravid ewes would enhance brown adipose tissue (BAT) thermogenesis in their offspring. Methods: Twin-bearing ewes were assigned on d 70 of gestation to diets containing 3, 10, or 20 ppm dietary Cu (n = 8 per group). Twin lambs were assigned at birth to a cold (6℃) or warm (28℃) environmental chamber for 48 h. Blood was collected from ewes and from lambs and perirenal BAT was collected after 48 h in the environmental chambers. Results: Prenatal Cu exposure increased ewe plasma triiodothyronine (T₃) and thyroxine concentration (T₄) (p<0.01) but prenatal Cu exposure had no effect on lamb plasma concentrations of T₃, T₄, glucose, or nonesterified fatty acid concentration (p≥0.08). The high level of prenatal Cu exposure depressed 48-h rectal temperature (p = 0.03). Cold exposure decreased BAT norepinephrine (NE) and increased BAT dopamine (p≤0.01), but prenatal Cu exposure had no effect on BAT cytochrome C oxidase activity or BAT NE or dopamine (p≥0.07). However, BAT of lambs from high-Cu ewes maintained higher uncoupling protein-1 (UCP1) gene expression than BAT of lambs from low- and medium-Cu ewes following warm or cold exposure in environmental chambers (p = 0.02). Cold exposure caused near depletion of BAT lipid by 48 h (p<0.001), increased BAT cytochrome c oxidase activity (p<0.01), and depressed plasma fatty acid concentrations (p<0.001). Conclusion: Although prenatal Cu exposure increased BAT UCP1 expression during warm and cold exposure, prenatal cold Cu exposure depressed 48-h rectal temperature. Cold exposure decreased BAT lipid content by over 80% and decreased lamb plasma fatty acid concentration by over 40%, indicating that fuel reserves for thermogenesis were nearly depleted by 48 h of cold exposure.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.333-344
• /
• 1995

Cu를 함유한 2종의 저합금 고장력강(HSLA-A, HSLA-B)\ulcorner 기계적 성질에 미치는 시효처리의 영향을 조사하였다. 탄소량이 적음에도 불구하고 Cu첨가로 석출물을 생성시킴으로서 2합금 모두 $650^{\circ}C$에서 시효한 경우 양호한 강도(HSLA-A:Y.S 703Mpa, E.L 22.6% HSLA-B:Y.S 810 Mpa, E.L 23.8%)와 인성(HSLA-A:271.4J, HSLA-B:197.5J at -5$0^{\circ}C$)의 조합을 나타내었다. 50$0^{\circ}C$에서 시효할 때 가장 높은 항복 강도를 나타내나 인성은 아주 낮은 값을 나타내었다. 50$0^{\circ}C$이상 시효 온도가 증가하면 강도는 감소하고 인성은 증가하였다. HSLA-B강의 강도가 HSLA-A 강보다 높은데, \ulcorner칭 상태에서의 강도 차이는 경화능을 증가시키는 원소인 Ni, Mn, Mo, Cu의 첨가량 차이에 의한 기지 조직의 차이에 의한 것이며, 시효한 상태에서의 강도 차이는 기지 조직과 석출 강화에 기여하는 Cu량의 차이에 의한 것으로 판단된다. 시효 경화 곡선에서 $700^{\circ}C$에서의 경도 증가는 오스테나이트-페라이트 2상 영역으로부터 냉각시 생성된 “M-A constituents”에 의한 것이다. HSLA-A강과 HSLA-B강의 충격 천이 온도는 각각 -1$25^{\circ}C$와 -145$^{\circ}C$이었다.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.1
• /
• pp.53-64
• /
• 1995

A study was made to characterize the microstructures and mechanical properties of the base metal and the heat-affected zone(HAZ) in Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulated the weld HAZ. The relationship between microstructure and toughness of HAZ was studied by impact test, O. M, SEM, TEM, and DSC. The toughness requirement of military specification value was met in all test temperatures for the base metal. The decrease of HAZ toughness comparing to base plate is ascribed to the coarsed-grain and the formation of bainite. Obliquely sectioned Charpy specimens show that secondary crack propagate easily along bainite lath. Improved toughness(240J) at HAZ of $Tp_2=950^{\circ}C$ is due to the fine grain, and reasonable toughness(160~00J) in the intercritical reheated HZA is achieved by the addition of small amount of carbon which affects the formation of "M-A". Cu precipitated during ageing for increasing the strength of base metal is dissolved during single thermal cycle to $1,350^{\circ}C$ and is precipitated little on cooling and heating during subsequent weld thermal cycle. Thus, the decrease of toughness does not occur owing to the precipitation of Cu.

• Korean Journal of Metals and Materials
• /
• v.48 no.3
• /
• pp.248-255
• /
• 2010

The effect of various alloying elements and melt treatment on the microstructural control of Al-Sn metallic bearing alloy was investigated. The thickness of tin film crystallized around primary aluminum decreased with the addition of 5% Cu in Al-Sn alloy, with tin particles being reduced in size by intervening the Ostwald ripening. With the addition of Si in Al-10%Sn alloy, the tin particles were crystallized with eutectic silicon, resulting in uniform distribution of tin particles. With the addition of Cu and Si in Al-Sn alloy, both the tensile strength and yield strength increased, with the increasing rate of yield strength being less than that of tensile strength. Although the Al-10%Sn-7%Si alloy has similar tensile strength compared with Al-10%Sn-5%Cu, the former showed superior abrasion resistance, resulting from preventing the tin particles from movement to the abrasion surface.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3377-3380
• /
• 2013

The spectrophotometric and electrochemical properties of tetraazo(p-carboxy)phenylcalix[4]arene (p-CAC) in the presence of various metal ions were investigated by UV/Vis spectroscopy and voltammetry in $CH_3CN$. p-CAC showed selective color changes to $Cu^{2+}$ over other metal ions from light orange to colorless, in accordance with hypsochromic shift in UV/Vis spectra. Voltammetric measurements also showed high selectivity for $Cu^{2+}$.

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.253-266
• /
• 1989

The Cu-Pb-Zn-Ag hydrothermal vein type deposits which comprise the Dongil and Dong-cheogogsan mines occur within the Cretaceous sedimentary rocks in the Euiseong Basin of the southern Korean peninsula. The ore mineralization is contained within three stage(I,II and III) quartz and calcite veins. Ore minerals occur as dominant chalcopyrite, galena, sphalerite, tetrahedrite and Pb, Ag, Sb and Bi-bearing sulfosalts. Stage I ore minerals were deposited between $400^{\circ}C$ and $200^{\circ}C$ from the fluid with moderate salinities(7.0 to 4.5 eq. wt. % NaCl). Evidence of boiling suggests pressure of less than 150 bars during stage I mineralization. This pressure corresponds to maximum depths of 650 m and 1700 m, respectively, assuming lithostatic and hydrostatic loads. The data on mineralogy, temperature and salinity, together with information on the solubility of Cu complex, suggest that Cu deposition is a result of boiling coupled with declining temperature from $350^{\circ}$ to $250^{\circ}C$ or declining log $a_{o_2}$(from -29.8 to -35.9 atm.)and increasing in pH. Pb, Ag, Sb and Bi-bearing sulfosalts were deposited by cooling and dilution at temperature of less than $250^{\circ}C$ from the ore fluid with less than -35.9 atm. of log $a_{o_2}$.