• 한국표면공학회지
• /
• 제35권1호
• /
• pp.11-16
• /
• 2002

As environmental concerns increasing, the electronics industry is focusing more attention on lead free solder alternatives. In this research, we have researched wettability of intermediate solder of Sn3Ag9Bi5In, which include In and Bi and has similar melting temperature to Sn37Pb eutectic solder. We investigated the wetting property of Sn3Ag9Bi5In. To estimate wettability of Sn3Ag9Bi5In solder on various substrates, the wettability of Sn3Ag9Bi5In solder on high-pure Cu-coupon was measured. Cu-coupon that plated Sn, Ni and Au/Ni and Si-wafer adsorbed Ni/Cu under bump metallurgy on one side. As a result, the wetting property of Sn3Ag9Bi5In solder is a little better than that of Sn37Pb and Sn3.5Ag.

• 한국표면공학회지
• /
• 제28권1호
• /
• pp.3-13
• /
• 1995

Electroless Ni and Cu platings were conducted on $B_4C$ and SiC. In the electroless Ni plating, the deposition rate on $B_4C$ was higher than on SiC. However, the electroless Cu deposition occured with high deposition rate regardless of the carbide substrates used in this study. Uniformity of the deposits was better in the electroless Cu deposition than in the electroless Ni deposition. In the topographies of the electroless depositions, Ni deposits have grown as colony, whereas Cu deposits have grown as fine individual grains.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1193-1196
• /
• 2009

Low resistivity interconnection and high-mobility channel are required to realize ultrahigh-definition LCDs such as 4k ${\times}$ 2k TVs. We evaluated fully Cu-based gate and Source/Drain interconnections, consisting of stacked pure-Cu/Cu-Mn layers for TFT-LCDs, and found the underlying Cu-Mn alloy film has superior adhesion to glass substrates and CVD-SiOx films. It was also confirmed that wet etching of the Cu/Cu-Mn films without residues and low contact resistance with both channel IGZO and pixel ITO films can be obtained. It is thus considered that the stacked Cu/Cu-Mn structure is one of candidates to replacing conventionally pure-Cu/refractory metal.

• Advances in nano research
• /
• 제9권2호
• /
• pp.113-122
• /
• 2020

Surface-Enhanced Raman Scattering (SERS) spectroscopy is a multifaceted surface sensitive methodology which exploits spectroscopy-based analysis for various applications. This technique is based on the massive amplification of Raman signals which were feeble previously in order to use them for appropriate identification at qualitative and quantitative in chemical as well as biological systems. This novel powerful technique can be utilized to identify pathogens such as bacteria and viruses. As far as SERS is concerned, one of the most studied problems has been functionalization of SERS active substrate. Metal colloids and nanostructures or microstructures synthesized using noble metals such as Au, Ag and Cu are considered to be SERS active. Silver and gold are extensively used as SERS active substrates due to chemical inertness and stability in air compare to copper. However, use of Cu as a suitable alternative has been taken into account as it is cheap. Herein, we have synthesized air-stable copper microstructures/nanostructures by chemical, electrochemical and microwave-assisted methods. In this paper, we have also discussed the use of as synthesized copper micro/nanostructures as inexpensive yet effective SERS active substrates for the fast identification of micro-organisms like Staphylococcus aureus and Escherichia coli.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.21-25
• /
• 2015

유연 기판에 증착된 구리 박막과 구리 배선의 기계적 피로 현상에 대해 조사하고, 몰리브덴-티타늄 합금 접착 층을 이용해 피로 신뢰성을 향상시키는 연구를 진행하였다. 구리 배선의 경우 구리 박막에 비해 인장 굽힘 피로수명이 약 3배, 압축 굽힘 피로수명은 약 6배 가량 감소하는 것으로 측정되었으며, 기계적 균열 생성에 의한 파괴가 더욱 치명적으로 작용할 수 있다. 몰리브덴-티타늄 접착층이 있을 경우, 구리 배선의 피로수명이 인장과 압축 굽힘 조건 모두 향상되는 결과를 나타냈으며, 이는 접착층에 의한 계면 접착력 상승 효과와 더불어 구리층의 미끄럼 현상을 억제했기 때문으로 추측된다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.89-89
• /
• 2006

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.58-58
• /
• 2003

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.13-16
• /
• 2000

(PbS)$_{1-x}$ -(CuS)$_{x}$ thin films(x=0, 0.5, 1) were grown on glass substrates by using a chemical bath deposition method. The molecular ratio of Pb to Cu for the PbS-CuS thin films(x=0.5) was measured about 7:3 by using EDX and XRF. The resistivity of non-annealed (PbS)$_{1-x}$ -(CuS)$_{x}$ thin films was about 10 $\Omega$ . cm. However, after annealing, the resistivity of PbS showed a little change, while PbS-CuS and CuS significantly decreased in the range of 0.002 to 0.005$\Omega$.cm. PbS was p-type and CuS was n-type.-type.

• Mycobiology
• /
• 제37권2호
• /
• pp.109-113
• /
• 2009

The mineral contents of the cultivation substrates, fruiting bodies of the mushrooms, and the postharvest cultivation substrates were determined in cultivated edible mushrooms Pleurotus eryngii, Flammulina velutipes, and Hypsizigus marmoreus. The major mineral elements both in the cultivation substrates and in the fruiting bodies were K, Mg, Ca, and Na. Potassium was particularly abundant ranging 10${\sim}$13 g/kg in the cultivation substrates and 26${\sim}$30 g/kg in the fruiting bodies. On the contrary, the calcium content in the fruiting bodies was very low despite high concentrations in the cultivation substrates, indicating Ca in the cultivation substrates is in a less bio-available form or the mushrooms do not have efficient Ca uptake channels. Among the minor mineral elements determined in this experiment, Cu, Zn, and Ni showed high percentage of transfer from the cultivation substrates to the fruiting bodies. It is noteworthy that the mineral contents in the postharvest cultivation substrates were not changed significantly which implies that the spent cultivation substrates are nutritionally intact in terms of mineral contents and thus can be recycled as mineral sources and animal feeds.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.173-180
• /
• 1999

Thermally evaporated ZnTe films were investigated as a back contact material for CdS/CdTe solar cells. Two deposition methods, coevaporation and double-layer methods, were used for Cu doping in ZnTe films. ZnTe layers (0.2$\mu\textrm{m}$ thick) were deposited either on glass or on CdS/CdTe substrates without intentional heating of the substrates. Post-deposition annealing was performed at 200,300 and $400^{\circ}C$ for 3,6 and 9 minutes, respectively. Band gap of 2.2eV was measured for both undoped and doped films and a slight change in the shape of absorption spectra was observed in Cu-doped samples after annealing at $400^{\circ}C$. The resistivity of as-deposited ZnTe decreased from 10\ulcorner~10\ulcornerΩcm down to 10\ulcornerΩcm as Cu concentration increased from 0 to 14 at.%. There was not a noticeable change in less of annealing temperature up to $300^{\circ}C$ whereas films annealed at $400^{\circ}C$ revealed hexagonal (101) orientations as well. Some of Cu-doped ZnTe revealed x-ray diffraction (XRD) peaks related with Cu\ulcornerTe(x=1.75~2). Grain growth was observed from about 20nm in as-deposited films to 50nm after annealing at $400^{\circ}C$ by scanning electron microscopy (SEM). Cu distribution in ZnTe films was not uniform according to Auger electron spectroscopy (AES) measurements.