목적: 이 연구의 목적은 두층 섬광결정을 사용하여 PET 기기 시야 외곽에서 발생하는 영상 왜곡현상을 최소화하는 고 민감도, 고 분해능의 소동물 PET 시스템을 개발하는 것이다. 대상 및 방법: GATE (Geant4 Application for Tomographic Emission) 시뮬레이션 프로그램을 사용하여 시스템을 모사하였고 시스템 성능을 예측하였으며 시뮬레이션에서 도출한 파라미터를 기준으로 시스템을 설계 제작 하였다. 두층 섬광결정은 Lutetium Oxyorthosilicate (LSO)와 Lutetium-Yttrium Aluminate-Perovskite (LuYAP)으로 구성하였다. 섬광결정의 각 픽셀크기는 $2mm{\times}2mm{\times}8mm$이며 $8{\times}8$로 배열하여 두층 섬광결정으로 구성하였다. 두층 섬광결정 배열을 위치민감형 광전자증배관(Position Sensitive Photomultiplier Tube: PSPMT)과 결합하여 한 개의 검출기를 구성하였으며, 총 16개 검출기를 지름 10 cm, 유효시야 8 cm인 원형으로 배열하였다. 검출기로부터 출력된 데이터는 소켓, 디코더, ADC, FPGA회로를 거쳐 전 처리 컴퓨터에 입력되고 마스터 컴퓨터에 저장 되도록 하였다. 결과: 시스템 개발의 초기 연구로 한쌍 검출기만 사용하여 단층영상을 획득하고 민감도와 공간분해능을 측정하였다. 점선원을 시야 중앙에 위치했을 때 공간분해능은 2.3 mm FWHM이고, 민감도는 10.9 $cps/{\mu}Ci$이었다. 결론: 구축한 시스템을 사용하여 선원의 위치와 모양변화를 정확하게 측정한 사이노그램과 PET 영상을 획득할 수 있었다. 이 연구는 고 분해능 고 민감도 PET 시스템 개발의 초기연구로, 소형 원형 PET 시스템 개발 가능성을 보여준다.lamate을 이용하여 측정한 사구체 여과율과 통계적으로 유의한 상관 관계를 보이지 않았다. 결론: Gates 방법을 이용한 사구체 여과율 측정에서 배후 방사능 관심 영역은 신장의 상방과 양측 신장사이, 즉 혈액 풀 방사능이 많이 분포하는 부위에 설정하는 것이 I-125-iothalamate을 이용한 사구체 여과율과 가장 높은 상관 관계를 보였고, 신장 깊이가 깊지 않은 2군에서 두 사구체 여과율은 더 높은 상관 관계를 보였다.7%$, 25분일 때 $95{\pm}12%$, 40분일 때 $98{\pm}3%$로 통계학적으로 유의한 차이는 없었다(p>0.05). 항응고제 종류에 따른 결합효율은 헤파린을 사용한 경우 $89{\pm}20%$, CPDA를 사용한 경우 $97{\pm}6%$, ACD를 사용한 경우 $98{\pm}4%$로 CPDA와ACD를 사용한 경우에 유의하게 높은 결합효율을 보였다(p<0.001). 결론: 변형 체내 표지법으로 적혈구를 표지시 우수한 결합효율을 유지하기 위해서는 채취하는 혈액의 양은 3 mL 이상, 배양시간은 10분 이상(10분-40분), 항응고제는 ACD나 CPDA tinning 시간은 20분 이상(20-35분)을 유지하고, 가능한 rotating invertor를 사용하는 것이 좋을 것으로 생각된다.KC $\varepsilon$이 K562(Adr)세포에서 많이 발현되었으나, K562와 K562(Adr)세포에서는 verapamil처리에 따른 PKC 아형의 변화는 없었다. 결론: Verapamil은 암세포의 종류에 따라 MIBI와 TF의 섭취를 감소시켰고, 고용량에는 MDR세포의 섭취도 감소시켰으며 이러한 현상은 세포독성 이나 PKC효소 아형과는 관련이 없었다. 그러므로 MDR의 진단시 verapamil을
Three-dimensionally ordered macroporous (3DOM) structures of the $LiCoO_2$ electrode materials for Li secondary batteries were fabricated by using the close-packed arrays of PMMA spheres served as templates. In order to successfully fabricate the cathode materials with highly ordered array form, the metal citrates were applied to new precursors. The precursor/template composites were prepared by the infiltration with metal citrate precursors into the voids of template. By removing the PMMA templates, then, the inverse opal structures with the uniform pores of narrow size distribution were resulted. It was confirmed that the 3DOM $LiCoO_2$ material is to take a single phase of rocksalt (R3m) structure. In addition, 3DOM $LiNiO_2$ and $LiMn_{2}O_4$ cathode materials were fabricated using an identical preparation procedure. Also, the morphology of the 3DOM cathode materials calcined at $500^{\circ}C\;to\;700^{\circ}C$ was observed by scanning electron microscope.
Aluminum has been widely used in the electric applications because of light metals. When mechanical element is periodically moving with contacting other surfaces, the anodizing process for aluminum is useful for avoiding the abrasive damage. The anodized element has quietly different characteristics with respect to the distribution of hardness and crystal structure. In this work, the laser drilling of anodized surface is studied experimentally. Fusion drilling method - laser drilling with inert gas blowing - is used. The effect of various process parameters (gas pressure, laser power, focus position) is investigated with respect to the hole size and circularity.
Oil well casing leak is caused by contact of casing outer surface with formation electrolyte. It is usually associated with an aquifer with a high salt content or absence of a cement ring behind the casing. The only way to reduce external casing corrosion is through cathodic protection. Through cathodic polarization of casing structure, electron content in crystal lattice and electron density will increase, leading to a potential shift towards the cathodic region. At Tatneft enterprises, cathodic protection is carried out according to cluster and individual schemes. The main criterion for cathodic protection is the size of protective current. For a casing, the protective current is considered sufficient if measurements with a two-contact probe show that the electric current directed to the casing has eliminated all anode sites. To determine the value of required protective current, all methods are considered in this work. In addition, an analysis of all methods used to determine the minimum protective current of the casing is provided. Results show that the method of measuring potential drop along casing is one of the most reliable methods for determining the value of protective current.
초음파 분무법으로 $(Y,Gd)BO_3:Eu$의 PDP 적색 형광체를 제조하여 147nm VUV 여기에 따른 발광 특성을 분석하였다. 초음파 분무에 사용된 전구체 용액은 Y, Gd, Eu의 아세트산염과 $H_3BO_3$를 증류수에 용해하여 1.7MHz의 초음파 분무기로 고온의 반응관내로 분무하였다. 분무된 액적은 반응관내에서 통과시 불충분한 반응으로 C-C와 C-H를 함유한 비정질 상이었으나, $1100^{\circ}C$에서 추가 열처리 한 시편은 고상반응법으로 제조한 형광체와 동일한 결정구조와 성분을 보였다. 고상반응법으로 제조한 형광체의 분말 크기는 $3{\mu\textrm{m}}$으로 조대하고 불균일한 분포를 보인 반면, $500^{\circ}C$에서 분무한 후 $900^{\circ}C$에서 열처리하여 제조한 $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}\;^{3+}$ 형광체의 모양은 비교적 구형이었으며 평균 입자크기는 $0.7{\mu\textrm{m}}$로 미세하고 균일한 분포를 하고 있었다. 147nm VUV 여기시 초음파 분무로 제조한 $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}\;^{3+}$ 형광체의 적색 발광강도는 고상반응법으로 제조한 시편이나 상용품인 $(Y,Gd)BO_3:Eu$ 형광체에 비해 그 휘도가 증가되었다.
Nano-sized ZrVFe alloy powders were prepared by the ablation of powder compact in alcobol using a Nd-YAG pulsed Laser. The $Zr_{57}V_{35.}8Fe_{7.2}$ alloy commercially designated as ST707 has long been known as the ideal solution for various vacuum applications. The target for the ablation was sintered pellets of $Zr_{57}V_{35.}8Fe_{7.2}$ alloy powder. The alloy was prepared by arc melting and Hydride-DeHydride method. The ablated powders were mostly circular having fairly large size distribution smaller than 200 nm in all cases. The X-ray diffraction study revealed that the ablated alloy retained the crystal structure of the target alloy. Nevertheless, Fe and V contents in the ablated powder were lower than those in the target alloy. This was believed to result from the high vapour pressures of Fe and V compared to that of Zr. The size of the powders ablated at high energy fluence tends to decrease due at least partly to the breakdown of previously made ones.
Porous alumina ceramics with addition of 0, 5, 10, 15, and 20 wt% Al(H2PO4)3 were sintered at 1300, 1350, and 1400℃. The effects of the Al(H2PO4)3 addition on crystal phases, water absorption, open porosity, pore size distribution, microstructures, and flexural strength were studied extensively. The experimental results revealed that only characteristic peaks of corundum were indexed in the XRD patterns of the as-prepared porous ceramics. The water absorption and open porosity of the porous Al2O3 ceramics increased remarkably with an increase in Al(H2PO4)3 addition. The flexural strength first increased to a maximum value when 5 wt% Al(H2PO4)3 was added and then decreased as additional Al(H2PO4)3 was further added. SEM images showed that the average Al2O3 grain size in the porous ceramics changed in an opposite way as the flexural strength. The porous Al2O3 ceramics with 10 wt% Al(H2PO4)3 addition exhibited comparable flexural strength to the ceramics without Al(H2PO4)3 addition, although the latter had much higher porosity.
유기 분자의 자기조립 다분자막은 기질의 표면에서 전자기적인 상호작용을 통해 자발적으로 형성된다. 본 연구에서는 이 기술을 응용하여 고에너지물질의 안전성과 취급용이성이 향상됨을 입증하였다. 최근 다양한 연구에서 고에너지물질 결정 내부의 결함은 물질의 안전성을 저하시키는 요인이므로, 결정 입자의 크기를 감소시키는 연구가 중요시되고 있다. 이에 따라, 결정화 방법을 통해 제조된 나노 수준의 고에너지물질을 사용하였으며, 자기조립 다분자막 기술을 응용하여 물질의 안전성을 향상시켰다. 입도/표면전하/마찰감도/정전기 전하 등을 측정하여 표면개질 여부를 확인하였다.
$LaCoO_3$ powders synthesized by Pechini process were pulverized by planetary ball-milling to decrease particle size and characterized as a catalyst in alkaline solution for oxygen reduction and evolution reaction (ORR & OER). The changes of physical properties, such as particle size distribution, surface area and electric conductivity, were analyzed as a function of ball-milling time. Also, the variations of the crystal structure and surface morphology of ball-milled powders were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The electrochemically catalytic activities of the intrinsic $LaCoO_3$ powders decreased with increasing ball-milling time, but their electrochemical performance as an electrode improved by the increase of the surface area of the powder.
Kang, SukHyun;Jung, Kyung-Hwan;Kim, Kang Min;Kim, Won Rae;Han, HyukSu;Mhin, Sungwook;Son, Yong;Shim, Kwang Bo;Lee, Jung-Il;Ryu, Jeong Ho
Journal of Ceramic Processing Research
/
제20권2호
/
pp.158-163
/
2019
Er3+/Yb3+-codoped NaLa(MoO4)2 colloidal nanocrystals were synthesized by pulsed laser ablations in de-ionized water and sodium dodecyl sulfate (NaC12H25SO4, SDS) aqueous solution for up-conversion (UC) luminescence bio-labeling applications. The influences of the SDS molecules on the crystallinities, crystal morphologies, crystallite sizes, and UC luminescence properties of the prepared Er3+/Yb3+-codoped NaLa(MoO4)2 colloidal nanocrystals were investigated in detail. Under a 980-nm excitation, the Er3+/Yb3+-codoped nanocolloidal NaLa(MoO4)2 suspension exhibited a weak red emission near 670 nm and strong green UC emissions at 530 and 550 nm, corresponding to the intra 4f transitions of Er3+ (4F9/2, 2H11/2, 4S3/2) → Er3+ (4I15/2). When the SDS solution was used, a smaller average crystallite size, narrower size distribution, and enhanced UC luminescence were observed. These characteristics were attributed to the amphoteric SDS molecules attached to the positively charged Er3+/Yb3+-codoped NaLa(MoO4)2 colloidal nanocrystals, effectively occupying the oxygen defect on their surfaces. The Er3+/Yb3+-codoped nanocrystalline NaLa(MoO4)2 suspension prepared in the SDS solution exhibited a remarkably strong green emission visible to the naked eyes.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.