• 한국결정성장학회지
• /
• 제3권2호
• /
• pp.162-166
• /
• 1993

적외선 할로겐 lamp를 열원으로 하는 image furnace을 사용하는 Floating Zone process를 이용하여 Spodumene$(LiAlLi_2O_6)$ 단결정을 성장하였다. 결정의 길이는 50~60mm, 직경 6~8mm였고 dopant에 따라 녹색, 흑색, 연한 녹색의 결정을 얻었다. Spodumene 조성의 고찰을 위해 XRD와 FTIF을 조사하였으며, Laue back reflection pattern을 통해 결정성을 고찰하였다. 결정의 광투과도 측정을 위해 optical transmittance를 측정하였다.

• 열처리공학회지
• /
• 제33권1호
• /
• pp.1-12
• /
• 2020

In this study, thin foil fabrication using Ni/Ni₃Al single crystal was performed by cold-rolling. It was found that the cold-rolling behavior was strongly dependent on the initial crystallographic orientation rather than morphology of Ni₃Al precipitates. The deformation banding was formed in the case of (100)[001]- and (210)[001]-oriented specimens at 83% reduction in thickness. However, the effects of Ni₃Al precipitates morphology on the microstructure evolution of Ni/Ni₃Al single crystals during cold-rolling were not so serious comparing with the effects of initial crystallographic orientation. Therefore, it could be concluded that the deformation behavior of Ni/Ni₃Al single crystals at serious strain level was strongly dependent on the initial crystallographic orientation rather than the morphology of Ni₃Al precipitates, whereas the initial deformation behavior was related to both crystallographic orientation and the morphology of Ni₃Al precipitates.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.245-249
• /
• 2001

This paper is concerned with numerical analyses for bulk forming of a single crystal milli-product, whose typical size ranges from a few hundreds ${\mu}m$ to a few mm. The numerical formulation invoked in this paper combines the crystal plasticity theory considering texture development and the ductile damage mechanics for growth of micro voids, since orientation development and growth of micro voids become the primary factors for bulk forming of milli-size products. As applications, milli-extrusion of a single crystal round bar and milli-rolling of a single crystal plate are simulated and the results are discussed in detail.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.449-455
• /
• 1997

KOH 용액을 이용한 단결정 실리콘의 이방성 식각 특성을 조사하였다. n형 (100) 단결정 실리콘 웨이퍼를 시료로 사용하였으며, 식각 비율이 월등히 작은 $SiO_2$층을 실리콘 식각의 마스크로 사용하였다. 실리콘의 식각속도와 식각상태는 KOH 용액의 농도와 온도조건 뿐만 아니라 용액의 균일도, 용액의 교반속도와 교반방향 등에 따라 큰 차이가 발생하였다. 실리콘의 식각 속도는 KOH 농도가 낮아질수록 증가하며, 온도는 높아질수록 증가하는 경향을 보였으며, 20 wt%~50 wt%의 농도 범위와 $50^{\circ}C~105^{\circ}C$의 온도 범위에서 식각속도는 $10\mu \textrm{m}/hr~250\mu\textrm{m}/hr$로서 큰 폭으로 변화하였다. 식각된 표면의 거칠기중 hillock의 발생은 (100)면과 (111)면의 식각 속도 비율이 커질수록 증가함을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제35권6호
• /
• pp.626-630
• /
• 2022

A 100 mm × 50 mm-sized (100) gallium oxide (Ga₂O₃) single crystal ingot was successfully grown by edge-defined film-fed growth (EFG). The preferred orientation and the quality of grown Ga₂O₃ ingot were compatible with a commercial Ga₂O₃ substrate by showing strong (100) orientation behaviors and 246 arcsec in X-ray rocking curve. Raman characterization was also performed for both samples; thereby providing various Raman-active characteristics of Ga₂O₃ crystals. In particular, we observed A_g(5) and A_g(10) peaks of Raman active mode, directly related to the impurity of the grown Ga₂O₃ crystal. Hence, the comparison of the crystal quality and Raman analysis might be useful for further enhancement of Ga₂O₃ single crystal quality in the future.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.47-50
• /
• 1999

The orientation mechanism of an amorphous $Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ phase were studied by using the dilatometry. The amorphous $Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ samples brought about a volume shrinkage at the onset of the crystallization of a $Bi_{2}$$Sr_{2}$$CaCu_{2}$$O_{6}$phase around $400^{\circ}C$. The random crystal growth of $Bi_{2}$$Sr_{2}$$CaCu_{2}$$O_{8}$ phase around $800^{\circ}C$. yielded a rapid volume expansion and after then samples shrinmed, accompanied with the crystal orientation. The$Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ (x=0.4) sample exhibited the best-oriented structure because the liquid phase formed seemed to have the lowest viscosity which would contributed to the easy collapse of the card-house structure.

• 폴리머
• /
• 제26권4호
• /
• pp.431-438
• /
• 2002

편광 푸리에 변환 적외선 분광법을 이용하여 액정 디스플레이의 배향막으로 널리 사용되는 폴리이미드 필름의 편광 자외선 조사에 따른 액정의 배향성과 열적 안정성을 연구하였다. 편광자외선이 조사된 폴리이미드의 경우, 조사된 편광자외선의 극성 방향에 평행한 폴리이미드 분자들의 우선적인 광분해 반응으로 인하여 편광자외선 조사 후 남아 있는 폴리이미드 분자들은 조사된 편광자외선 극성 방향과 수직 배향을 나타내었다. 하지만 러빙 처리된 폴리이미드 필름은 러빙 방향과 평행하게 폴리이미드 분자들의 재배향이 유도됨을 확인하였다. 또한 편광자외선이 조사된 폴리이미드 배향막이 편광자외선 조사를 통한 폴리이미드 분자들의 단편화 반응 때문에 러빙 처리된 폴리이미드 배향막 보다는 열적 안정성이 저하됨을 확인하였다.

• Applied Microscopy
• /
• 제45권1호
• /
• pp.23-31
• /
• 2015

Dark field (DF) transmission electron microscopy image has become a popular characterization method for two-dimensional material, graphene, since it can visualize grain structure and multilayer islands, and further provide structural information such as crystal orientation relations, defects, etc. unlike other imaging tools. Here we present microstructure of graphene, particularly, using DF imaging. High-angle grain boundary formation wass observed in heat-treated chemical vapor deposition-grown graphene on the Si substrate using patch-quilted DF imaging processing, which is supposed to occur by strain around multilayer islands. Upon the crystal orientation between layers the multilayer islands were categorized into the oriented one and the twisted one, and their local structure were compared. In addition information from each diffraction spot in selected area diffraction pattern was summarized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.493-495
• /
• 2007

Cinnamate groups are well-known for a dimerization reaction upon exposure to ultraviolet irradiation and a thermal reaction after being heated. In this study, to verify the thermal reaction of the cinnamate group in detail, we investigated the thermal crosslinking of cinnamate oligomers. The thermal reaction of cinnamate oligomers of low molecular weight is induced more readily by thermal energy compared with that of cinnamate polymers. The orientation of the liquid crystal depended on the length of the spacers in the cinnamate oligomers.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.468-473
• /
• 2008

A MgO layer is used as electrode protective film in the alternating current plasma display panel (AC PDP). The properties of MgO layer are thought to be one of the most important factors that affects the panel reliability through the firing voltage variation. In this study, we investigated the relations between the surface characteristics and e-beam evaporation process parameters such as deposition rate, temperature of substrate and distance between the MgO pellet and substrate. To produce the MgO layer of (200) crystal orientation, we suggest the high temperature of the substrate, the long distance between the pellet and substrate and the high deposition rate.