• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.197-205
• /
• 2015

This study was performed to identify the effect of fertilizer application and planting method on growth and yield of 'Seolhyang' strawberry during seedling raising. According to the concentration of fertilizer applied, the height of daughter plants was the highest at an EC of $0.8dS{\cdot}m^{-1}$. Leaf number and crown diameter were greatest at an EC of $0.6-0.8dS{\cdot}m^{-1}$. In the first measurement, root number was highest in non-fertilizer application, while root weight was heaviest in non-fertilizer application and EC $0.4dS{\cdot}m^{-1}$. The higher the concentration of fertilizer applied as culture media, the lower the growth rate. Thirty days after planting on the main field, plant height and number of new leaf were highest at an EC of $0.8dS{\cdot}m^{-1}$. However, no significant difference was found in leaf length and width and chlorophyll content according to fertilizer application. Marketable yield of 25 g or higher was greatest in EC $0.6dS{\cdot}m^{-1}$. In contrast, no significance was found in total marketable yield at an EC of $0.4-0.8dS{\cdot}m^{-1}$. Aconsistent pattern was exhibited in the growth of 1-5 harvesting flower clusters according to planting method. The length of leaf and flower cluster was short and chlorophyll content was low, when bed soil was removed 100% in harvesting of the first flower cluster. In all treatment, leaf length was shortened until harvesting of the second and third flower cluster, but rapidly lengthened in harvesting of the third and fourth flower clusters. Moreover, the length of flower cluster had a increasing tendency from harvesting of the third flower cluster. However, chlorophyll content was reduced continuously until harvesting of the fifth flower cluster, and was lowest in harvesting of the fourth flower cluster without removal of bed soil. Total yield was greatest in treatment of crown removal in bed soil between November and May. Late marketable yield between March and May was highest in treatment of 100% bed soil removal, followed by treatment of crown removal. Marketable yield of 25 g or higher was greatest in treatment of crown removal between December and February, while greatest in treatment of 100% bed soil removal between March and May.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.265-274
• /
• 2008

Objective: The aim of this study was to evaluate the potency of panoramic radiography for the detection of maxillary impacted canines. Methods: Twenty-five patients were selected, comprised of 7 males (mean age: 10.9 years, range: 8.5 - 14.5 years) and 18 females (mean age: 10.9 years, range: 8.2 - 15.7 years). In total, thirty-five maxillary impacted canines were estimated. The position of the canine and root resorption of adjacent teeth were evaluated on panoramic radiography and 3D CT. Results: Except for angulation to the occlusal plane, the other parameters, such as tooth length, crown width, vertical distance and lateral shift showed larger values on panoramic radiography compared to 3D CT. In palatally impacted cases, the angulation of canine was smaller, and the vertical distance to the occlusal place was larger on panoramic radiography than 3D CT. For labially impacted canines, tooth length, crown width, and angulation to the occlusal plane were similar for the two methods. The sensitivity for detecting root resorption on panoramic radiography was calculated as being 33.3% of 3D CT. Conclusions: The position of labially impacted canines can be effectively estimated using panoramic radiography, but palatally impacted canines need further investigation such as 3D CT for proper diagnosis.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.576-583
• /
• 2009

Based on the stem analysis and biomass measurement of 36 trees and 1,576 branches in Pinus sylvestris var. mongolica (Mongolian pine) plantations of Northeast China, this study was conducted to develop estimation model equation for leaf biomass of a single tree and branch, to examine the vertical distribution of leaf biomass in the crown, and to evaluate the proportional ratios of biomass by tree parts, stem, branch, and leaf. The results indicated that DBH and crown length were quite appropriate to estimate leaf biomass. The biomass of single branch was highly correlated with branch collar diameter and relative height of branch in the crown, but not much with stand density, site quality, and tree height. Weibull distribution function would have been appropriate to express vertical distribution of leaf biomass. The shape parameters from 29 sample trees out of 36 were less than 3.6, indicating that vertical distribution of leaf biomass in the crown was displayed by bell-shaped curve, a little inclined toward positive side. Apparent correlationship was obtained between leaf biomass and branch biomass having resulted in linear function equation. The stem biomass occupied around 80% and branch and leaf made up about 20% of total biomass in a single tree. As the level of tree class was increased from class I to class V, the proportion of the stem biomass to total biomass was gradually increased, but that of branch and leaf became decreased.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.134-140
• /
• 2018

Clinical crown lengthening procedure would be an effective method for overcoming adverse clinical condition such as short abutment length. There are three kinds of methods in clinical crown lengthening, those are, surgical crown lengthening, orthodontic extrusion and surgical extrusion. Clinicians have to try their best to choose a proper method among those for favorable results. This report aims to review the considerations in each method with various cases and to suggest a decision flow for appropriate selection.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.637-648
• /
• 1999

Finishing is usually accomplished about four to seven months before the removal of orthodontic appliance in order to achieve ideal occlusion and excellent aesthetics. This process, called finishing, is the key to obtain excellent final results. Some of orthodontists believe it can be accomplished at the final stage of orthodontic treatment, and they complete it without their special rationale and criteria for finishing. However, it should be considered as a part of the total treatment plan from the beginning to end, and a guideline for finishing, which is based on rationale and criteria for the removal of orthodontic appliance, is needed to obtain the desired results. The guideline should include a checklist for finishing. This checklist is divided into four categories: occlusal, aesthetic, periodontal, and habitual factors. Occlusal fators include alignment, marginal ridge discrepancy, interproximal contact, anterior inclination, posterior inclination, over-jet over-bite, arch fen and functional occlusion. Aesthetic factors include gingival form, crown fen crown width, and crown length. Periodontal factors include root angulation, bone level, and black hole in periodontal factors. Habitual factors consist of mouth breathing, tongue position at rest, tongue thrust, lip biting, nail biting, and finger sucking

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.41-56
• /
• 2018

The purpose of this study was to provide clinical recommendations for restoration with selection of the most similar zirconia crown by 3-dimensional analysis of the shape of the maxillary primary central and lateral incisors in Korean individuals and prefabricated zirconia crowns. The average shape of the sound maxillary primary central and lateral incisors in 300 children was reproduced by 3-dimensional scanning. Zirconia crowns of 4 manufacturers (NuSmile $ZR^{(R)}$ Crown, Cheng $Crowns^{(R)}$, Kinder $Krowns^{(R)}$, and EZ $Pedo^{(R)}$ Crown) were scanned 3-dimensionally, and coordinates for comparison of the shape were measured to evaluate the similarity between the teeth and crowns. The most similar crowns were selected by comparing the mesiodistal length, crown height, crown shape ratio, distance between the same coordinates of a tooth and crown, the radius of curvature of the labial surface, and the volume. As a result of analysis, Cheng $Crowns^{(R)}$ size 3 and NuSmile $ZR^{(R)}$ Crown size 2 were the most similar crowns in the maxillary primary central and lateral incisors, respectively. Scanning the inner surface of the crowns and evaluating the amount of tooth reduction required suggested that an overall lesser amount of tooth reduction compared to that presented by the manufacturer's guidelines should be performed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.99-106
• /
• 2013

Purpose: The aim of this research was to establish the effect and variation in differing convergence angle and length of abutment on the retention of full veneer casted gold crown. Materials and methods: Two different length,5 mm and 10 mm in height with convergence angles of 5, 10, 15 and 25 degrees crowns were fabricated. Cementation was done using cements; zinc phosphate cement (Fleck's zinc phosphate cement), resin-modified glass ionomer cement (Vitremer) and resin cement (Panavia 21). These were tested for tensile force at the point of separation by using Instron Universal Testing Machine. Statistical analysis was done by SAS 6.04 package. Results: In all cements the mean retention decreased with significant difference on increase of convergence angle (P<.05). Increase in every 5 degree-convergence angel the retention rate decreased with resin-modified glass ionomer cement of 15.9% and resin cement of 14.8%. With zinc phosphate cement, there was largest decreasing rate of mean retention of 25.5% between convergence angles from 5 degree to 10 degree. When the crown length increased from 5 mm to 10 mm, the retention increased with the significant difference in the same convergence angle and in all types of cement used (P<.05). Conclusion: The retention was strongly dependent on geometric factors of abutment. Much care is required in choosing cements for an optimal retention in abutments with different convergence angles and crown lengths.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.315-320
• /
• 2017

PURPOSE. The aim of this investigation was to analyze the dimensions of clinical crowns and to classify the crown and the gingival type in the anterior teeth in Korean young adults. MATERIALS AND METHODS. Casts were obtained from 50 subjects ranging in age from 24 to 32. Measurements of length and width were made on the casts using a pair of digital calipers on the entire dentition. Crown thickness and papilla height were also measured and MDW/CL (mesiodistal width to clinical length) and CW/CL (cervical width to clinical length) ratios of the maxillary anterior teeth were calculated. The K-clustering method was used for CW/CL to classify the anterior tooth shape into three groups (tapered, ovoid, and square), and one-way analysis of variance and Duncan's post-hoc comparison were used to evaluate statistical significance between the groups. Pearson's correlation analysis was performed between tooth shape and papillary height (PH) to demonstrate the correlation between tooth shape and gingival morphological characteristics. RESULTS. The average length of the maxillary central incisors was 9.89 mm; the mesio-distal width was 8.54 mm; and the ratio of width/length was 0.86 in Korean young adults. The average bucco-palatal thickness of the central incisor was 3.14 mm at the incisal 1/3 aspect. Ovoid type was the most common tooth shape (48%), followed by square type (29%) and taper type (23%) in the central incisors of Korean young adults. Tooth shape and gingival type were correlated with each other. CONCLUSION. New reference data were established for tooth size in Korean young adults and the data show several patterns of tooth shape and gingival type. Clinicians should diagnose and treat based on these characteristics for better results in the Korean population.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.451-468
• /
• 2020

Aging tunnels with small cross-sections can cause chronic traffic jams. This problem can be solved by widening the tunnel. In general, when the tunnel is expanded, the outer portion of the existing tunnel is excavated through a mechanical or blasting method. Such excavation affects not only the surrounding ground but also the existing tunnel. The application of the pre-cutting method can be a solution to these problems effectively. Therefore, if the widening of tunnel is performed by applying pre-cutting method, analysis of the impact of this method must be performed. In this study, in order to analyze the effect of applying pre-cutting in tunnel widening, numerical analysis is performed at six ground grades, from grade I to weathered rock. The analysis is performed with the expanding lane and the excavation length of pre-cutting as variables. In addition, the analysis is focused on the displacement of crown of the existing tunnel and the enlarged tunnel. As a result, the crown displacement of the enlarged tunnel is confirmed to converge at the same value regardless of the excavation length of the pre-cutting when the tunnel widening is completed. In the case of existing tunnels, uplift of crown occurs within 5 m of the front of the tunnel surface, and the shorter the excavation length of pre-cutting is found to be effective in preventing the occurrence of uplift.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.597-607
• /
• 2004

Purpose: This study was peformed to investigate the retrievability of the cemented crown from the cementation type implant abutment. Material and method: The cementation type implant abutments (NEOBIOTECH implant abutment regular, 3 degree taper, 10mm length, 4mm diameter, Ti grade III, machined surface. Hwasung, Kyunggi-do) and cemented crowns were divided into 3 groups, depending on their hole angles formed in the crowns for their retrievability. The abutments and crowns were luted with 4 kinds of cements and separation test using metal wedge was executed with Instron 4465 Universal Testing Machine and the maximum impact force of the modified crown ejector was measured. Results and conclusion : 1. All of the cementation type implant abutments and cemented crowns were separated with relatively small force by metal wedge. 2. The retrieving force was minimum when the metal wedge was applied perpendicular to the axis of abutment. 3. The force for retrieving crowns from abutments was maximum in resin cement group, and reduced in orders of zinc phosphate cement, glass ionomer cement and zinc oxide eugenol cement. 4. The maximum force obtained by the crown ejector was higher than the retrieval force in ZOE and GI cement and lower than that in ZPC and resin cement. 5. If it has similar conditions clinically, the cemented crowns luted with 2 types of cements (ZOE, GI cement) can be safely retrieved from the cementation type implant abutments by the modified crown ejector.