• The Journal of the Korean dental association
• /
• v.54 no.3
• /
• pp.191-197
• /
• 2016

In the past, restoration of implant crown, ready-made abutment produced by implant manufacturer could only be used. Using straight, angled abutment, there was a limit in adaptation multiple implants. Recently, with the development of implant and CAD/CAM technology, CAD/CAM customized abutment use has become possible which is different from the past when restoration was possible with only prefabricated abutment. Not only it makes emergence profile possible which is similar to natural teeth, but also it makes insertion path possible on CAD in multiple implant restorations. However, on anterior teeth which dental esthetics is very important, another restorations which are formed with natural colored gingiva area could be required. Titanium-based zirconia prostheses which have titanium connection and zirconia structure from 1mm above fixture platform are alternative. Therefore, the purpose of this review is to analyze the characteristics, advantages and disadvantages of the abutment which is used in multiple implant restorations, and to choose right abutment when clinical trials.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.126-131
• /
• 2022

Purpose: The purpose of this study is to evaluate the quality of dental fixed prostheses fabricated by 3DP (three-dimensional printing). Methods: Ten main models were prepared for the study. Ten specimens were printed by 3DP (3DP group). Ten specimens were fabricated by the lost wax technique and casting method to complete the control group (LWC group). The marginal fit was measured for 20 specimens. The measurement of marginal fit was performed using the silicon replica technique. Finally, the marginal fit of 10 specimens from each group was calculated. An independent sample t-test was run to see if the calculated averages for the two groups were mutually significant (α=0.05). Results: According to the experimental results, the mean marginal fit of the 3DP group was 71.9 ㎛, and the LWC group was 55.3 ㎛. The means of the two groups were found to be significantly different (p<0.001) in the results of the independent sample t-test. Conclusion: The marginal fit of fixed dental prostheses produced by 3DP technology was examined with values greater than those fabricated by traditional technology. However, as it appeared to be a value within the range of clinically acceptable range recommended by numerous studies, it was determined that clinical application would be feasible.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.80-86
• /
• 2023

We report two rare cases of extensive bilateral subcutaneous emphysema that occurred during ordinary dental procedures. An air-driven high-speed handpiece, routinely used in dental procedures may cause subcutaneous emphysema when high pressure air is introduced into the loose connective tissues below the dermal layer. The first case occurred with surgical extraction of the lower third molar. The air introduced into the fascial spaces near the surgical field spread to the contralateral spaces, as well as the neck and chest areas. The second case also showed extensive bilateral subcutaneous emphysema caused by the introduction of compressed air from the handpiece during crown preparation without any invasive procedure. Cases where the emphysema extends beyond the treatment site to involve the contralateral cervicofacial areas have been rarely reported. Predicting the occurrence of subcutaneous emphysema is difficult, so it is important to exercise caution during routine dental treatment. If significant bilateral cervicofacial swelling is suspected to be due to subcutaneous emphysema, prompt diagnosis with securing the patient's airway will be necessary.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.329-337
• /
• 2015

PURPOSE. This retrospective study aims at the evaluation of implant-supported overdentures (IODs) supported by ceramo-galvanic double crowns (CGDCs: zirconia primary crowns + galvano-formed secondary crown). MATERIALS AND METHODS. In a private practice, 14 patients were restored with 18 IODs (mandible: 11, maxilla: 7) retained by CGDCs on 4 - 8 implants and annually evaluated for technical and/or biological failures/complications. RESULTS. One of the 86 inserted implants failed during the healing period (cumulative survival rate (CSR) implants: 98.8%). During the prosthetic functional period (mean: $5.9{\pm}2.2years$), 1 implant demonstrated an abutment fracture (CSR-abutments: 98.2%), and one case of peri-implantitis was detected. All IODs remained in function (CSR-denture: 100%). A total of 15 technical complications required interventions to maintain function (technical complication rate: 0.178 treatments/patients/year). CONCLUSION. Considering the small sample size, the use of CGDCs for the attachment of IODs is possible without an increased risk of technical complications. However, for a final evaluation, results from a larger cohort are required.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.243-251
• /
• 2008

A subgingival crown-root fracture presents a restorative problem to the clinician because restoration is complicated by the need to maintain the sound tooth structures. Forced eruption offers a method of treatment of teeth fractured close to the alveolar crest. Extrusion of such teeth allows elevating the fracture line above the epitherial attachment and so the proper finishing margins can be prepared. The purpose of this case is to report successful tooth restoration using forced eruption in case of crown-root fractures.

• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.199-204
• /
• 2009

Purpose: Excessive gingival display and short clinical crowns due to altered passive eruptions are major concerns for a considerable number of patients visiting dental clinics. Altered passive eruptions could be corrected through various types of periodontal surgery conformable to a classification. 3 cases are reported here on the esthetic correction of altered passive eruption to evaluate results of crown lengthening procedure. Methods: Three patients whose major complaints were excessive gingival display and short teeth were picked out for this case study. Before treatment, clinical and radiological exam was performed to choose type of surgery. Thickness and width of keratinized gingiva was measured in all three patients then they were treated by surgical methods including flap operation and depigmentation under subsequent diagnosis. Results: Uneventful healing and stable gingival margin were observed in all three patients except recurrence of gingival pigmentation of one patient. Conclusions: The treatment of altered passive eruption requires precise diagnostic procedure and could achieve better esthetic outcomes when it is accompanied by other orthodontic and orthognathic treatment.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.115-121
• /
• 1985

This study was intended to investigate the effect of mesiodistal crown widths of the anterior teeth on the incisor relationship and to determine whether incisor width ratio and anterior width ratio could be used to assess interarch tooth width harmony. From the casts taken from 63 subjects, 26 of open bite, 18 of deep bite and 19 of normal over bite with age of 17-20, mesiodistal crown widths of maxillary and mandibular 6 anterior teeth were measured with Boley gauge. On the basis of tooth measurements, anterior and incisor width ratio were calculated. The cephalograms were taken from same subjects to measure the degree of over bite and over jet and to compare the craniofacial bony structures between open bite, deep bite and normal over bite. Correlations among the anterior width ratio, incisor width ratio, over bite and over jet were calculated. The results were as follows. 1. There were no differences in mesiodistal widths of anterior teeth, incisor width ratio and anterior width ratio between open bite, deep bite and normal over bite. 2. The incisor width ratio and anterior width ratio can be useful in the assessment of tooth width harmony because the incisor width ratio and anterior width ratio were stable statistically and significantly correlated with each other. 3. Over bite and over jet were not correlated with incisor width ratio and anterior width ratio.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.353-358
• /
• 2013

Purpose: This study was observation shear bonding strength by compositional change and firing step of a Ni-Cr alloy for porcelain fused metal crown. The aim of study was to suggest the material for firing step of Ni71-Cr14 alloy to development of alloy for porcelain fused to metal crown. Methods: The test was on the two kinds of Ni-Cr alloy specimens. The surfaces of two alloys were analyzed by EDX in order to observe oxide characteristic. And the shear test was performed by MTS. Results: The surface property and oxide characteristic analysis of oxide layer, weight percentage of Element O within $Ni_{71}Cr_{14}$ alloy measured 23.32wt%, and $Ni_{59}Cr_{24}$ alloy was measured 23.03wt%. And the maximum shear bonding strength was measured 58.02MPa between $Ni_{59}Cr_{24}$ alloy and vintage halo(H4 group). Conclusion: The surface property and oxide characteristic three kind of Ni-Cr alloy was similar. and shear bonding strength showed the highest bonding strength in H4 specimens.

• Restorative Dentistry and Endodontics
• /
• v.42 no.3
• /
• pp.240-252
• /
• 2017

The restoration of endodontic tooth is always a challenge for the clinician, not only due to excessive loss of tooth structure but also invasion of the biological width due to large decayed lesions. In this paper, the 7 most common clinical scenarios in molars with class II lesions ever deeper were examined. This includes both the type of restoration (direct or indirect) and the management of the cavity margin, such as the need for deep margin elevation (DME) or crown lengthening. It is necessary to have the DME when the healthy tooth remnant is in the sulcus or at the epithelium level. For caries that reaches the connective tissue or the bone crest, crown lengthening is required. Endocrowns are a good treatment option in the endodontically treated tooth when the loss of structure is advanced.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.4
• /
• pp.543-552
• /
• 2013

Objectives : The aim of the study is to investigate job performance expectations according to duration of work and to specify the clinical practice of dental hygienists by career expectations. Methods : The subjects were 310 dental hygienists in Seoul and Incheon. They completed the self-reported questionnaires and 304 data were analyzed except incomplete 6 answers. Results : The tasks performed by dental hygienists were as follows ; SS crown restoration in pediatric dentistry accounted for 25.1%, orthodontics (42.1 %), plaque removal (71.4 %), temporary fillings (60.5%), and impression taking of abutments and bite registration (58.9%). In order to be a skillful dental hygienists, it took two to three years of clinical filed work. Conclusions : On the job training (OJT) is the most important in dental hygiene curricula. So it is necessary to develop the OJT performance skill.