• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.847-854
• /
• 2007

The battery electrode of a mobile phone is made of layered polymer coated on aluminum foils and the hot rolling process is applied to increase the density per volume of an electrode for a high capacity battery. The flatness of batteries surfaces should be less than $2{\mu}m$. To satisfy the required flatness, the deformation of roll surface due to bending and heating of the roll should be minimized. Complicated hot oil paths of $100^{\circ}C$ inside the roll are required for heating the polymer layers. FEA was used to calculate thermal deformations and temperatures distributions of the roller. Based on FEA, a modified surface curvature called a crown roll was suggested and this gave the area of 30% improved flatness compared with a flat roll. The flat roll satisfied the flatness of $2{\mu}m$ in the length of 340 mm and the crown roll resulted in the longer length of 460 mm. Experiments to measure the temperature distribution and thermal strain were performed and compared with FEA. There were only 6% difference between two results.

• 치과방사선
• /
• 제20권1호
• /
• pp.79-89
• /
• 1990

The incidence and several characteristic features of fused and geminated teeth were studied radiographically, with full mouth periapical radiogram and pantomogram, in 4201 patients of mixed dentition and 5358 patients of permanent dentition. The obtained results were as follows: 1. The prevalence was revealed to 2.86%, 0.32%, 0.33%, and 0.06% in deciduous fused tooth, permanent fused tooth, deciduous geminated tooth and permanent geminated tooth respectively, and these anomalies were occured in female more than male. 2. Fused teeth were observed predominantly in lower anterior teeth area, especially in lateral incisor and canine region, and many cases of deciduous geminated tooth were observed in upper central incisor region. 3. Congenital missing rates of succedaneous tooth in deciduous fused teeth were 57.1 %, 85.7%, 71.0%, 69.0% in upper right and left central-lateral incisor regions, lower right and left lateral incisor-canine regions, respectively. 4. Prevalence of dental caries was 42.3%, 18.8% and 5.6% in deciduous fused, deciduous geminated and permanent fused tooth, respectively. 5. In classifying of fused and geminated teeth into 9 types, by following appearance such as number of crown, root, pulp chamber and pulp canal of those teeth, it was more favorable that Type Ⅰ(2 crown, 2 root, 2 pulp chamber, 2 pulp canal) in deciduous fused tooth and Type Ⅸ (I crown, 1 root, 1 pulp chamber, 1 pulp canal) in permanent fused tooth, deciduous and permanent geminated tooth.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.207-217
• /
• 2003

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the lower central ncisor. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results of this study were as follows : The fracture strength of the ceramic crown with 2.0mm depth and $12^{\circ}$ inclination was the highest (648 N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength (482 N). There were no significant differences of the fracture strength by axial inclination in same incisal depth group. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal depth. There had correlation between fracture strength and fractured surface area.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.321-324
• /
• 2008

Forest fire danger rate of thinning area was lower than that of non thinning area, because height rate of leewardside in burned stem of tree, damage rate of crown and mortality of tree in thinning area were 30.8%, 37% and 48.4% lower than that in non-thinning area, respectively. Intensity of forest fire varied depending upon topographical condition up slope, down slope, aspect, location as well as species, breast height diameter and forest tree density. Especially, a mountaintop area was burned down when forest fire was spread to up slope ridge of mountain.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.486-503
• /
• 1997

The purpose of this study was to evaluate the stress patterns developed in abutment and residual ridge according to removable denture design in case of remaining mandibular canines. The removable denture designs in this study were as foolows : 1. Removable partial denture with non-splinted abutment 2. Removable partial denture with splinted abutment 3. Overdenture with telescopic crown 4. Overdenture with O-Ring attachment 5. Overdenture with combination bar attachment Photoelastic stress analysis was used to record the isochromatic fringe patterns and to calculate principal stress components at measuring points. The results were as follows : 1. In case of removable partial denture with non-splinted abutment, stress of root area at the loaded side was the largest. No significant differences in stress of root area were observed between loaded side and unloaded side. 2. No significant differences in stress of residual ridge at the loaded side were observed between removable partial denture with splinted abutment and removable partial denture with non-splinted abutment. 3. In case of combination bar attachment retained overdenture, stress of root area was the largest and in case of telescopic crown retained overdenture, stress of root area was the lowest. 4. In case of attachment retained overdenture, stress of residual ridge was lower but stress of root area was larger than in case of removable partial denture.

• 한국환경생태학회지
• /
• 제32권3호
• /
• pp.303-312
• /
• 2018

본 연구는 숲가꾸기가 시행된 부산대학교 제1학술림을 대상으로 간벌 전 후의 산림생물량 및 온도를 실측하여 천연림에서 간벌에 따른 산림생물량 감소와 산림 내부 온도변화의 관계를 확인하고자 하였다. 산림생물량은 간벌 전 후 동일 조사구에 흉고단면적, 수관단면적, 수관체적을 각각 동일한 도출식을 적용하여 도출하였으며, 산림 온도와의 관계성을 파악하고자 하였다. 온도측정은 간벌 이전인 2016년 04월 20일~28일, 간벌 전후인 2016년 07월 26일~11월 04일, 간벌 이듬해인 2017년 04월 15일~05월 08일에 각각 실시하였으며 온도데이터로거를 방형구 내 중앙에 위치한 수목의 지상 2.0m 높이에 북향으로 설치하여 동일기간동안 각 10분마다 데이터가 기록되도록 설치하였다. 간벌이 산림 전역에 진행되어 산림 내 대조구 설정이 어려워 인근 도시에 위치한 동래구 지역별상세관측자료(AWS)를 대조구로 활용하였다. 산림생물량의 변화와 온도와의 관계성을 분석한 결과, 산림 내부 온도 변화는 한낮 시간대(PM12:00~15:00)에 가장 큰 변화를 보였으며, 산림생물량 중 수관체적과 깊은 관계성을 가지고 있었다. 간벌 직후(평균 $0.74^{\circ}C$)보다 간벌 후 1년이 경과한 시점(평균$1.91^{\circ}C$)에서 훨씬 높은 온도 상승을 보였다. 조사구별 수관체적 감소비율과 온도 상승정도를 비교한 결과, 수관체적 감소량이 15.4%로 가장 높았던 리기다소나무군락에서 간벌 직후와 1년 후 분석에서 각각 $1.06^{\circ}C$, $2.49^{\circ}C$로 가장 높은 온도 상승을 나타냈다. 수관체적 감소비율이 5.0%로 가장 적었던 리기다소나무-소나무군락에서 간벌 직후는 그 차이가 없었으며 1년 후 분석에서는 $0.92^{\circ}C$가 상승하였다. 천연림에서 간벌로 인한 산림생물량 감소는 산림내부 온도를 급격히 상승시키는 것을 확인할 수 있었으며 특히, 간벌 직후보다는 이듬해에 더 극심하게 나타나고 있어 제거된 산림생물량에 의한 미기후 변화는 단기간에 회복될 수 없음을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제46권5호
• /
• pp.479-489
• /
• 2008

목적: 상악 구치부에서 자연치와 임플란트 보철시, 보철치관/고정체 비율에 따른 응력분포 양상을 비교하고자 했다. 재료 및 방법: 자연치 모델의 경우는 획득한 3차원 인체모델을 상악 좌측 제2소구치 및 제 1대구치가 포함된 상악골을 Box 형태의 3차원 유한요소모델로 변환하였고, 임플란트 모델은 3차원 인체모델에서 치아 부분을 제거하고 동일 부위에 임플란트 모델을 연결하는 과정을 거쳐서 임플란트가 삽입된 유한요소모델을 구성하였다. 치관/고정체 비율을 0.7:1, 1:1, 1.25:1이 되도록 골수준 (bone level)을 조정하였으며 각 모델의 치관 부위에 300 N의 수직 하중과 수평하중을 각각 가했다. 결과: 1. 모든 하중 조건하에서 자연치와 임플란트 모두에서 피질골과 인접하는 경부에 응력이 집중되는 양상을 보였다. 2. 치관/치근 (고정체) 비가 증가함에 따라 자연치와 임플란트 모두에서 교합면에 수직적 하중을 가한 경우에는 응력의 변화가 뚜렷하지 않았으나, 수평적 하중을 가한 경우에서는 응력이 증가하는 양상을 보였다. 3. 자연치의 경우에 치관/치근비가 증가함에 따라 splinting이 응력감소 효과를 보였고, 임플란트의 경우에는, 치관/고정체 비가 증가함에 따라 splinting이 수직 하중조건에 응력감소효과를 보였으나, 중심에서 벗어난 하중조건에는 최대응력이 오히려 증가하는 양상을 보였다. 4. 임플란트의 경우, 치관/고정체 비가 증가함에 따라 splinting이 수평하중조건 4에서 뚜렷한 응력감소 효과를 보이나, 수평 하중조건 5에서는 응력감소 효과가 감소되고, 특히 치관/고정체 비가 1.25:1인 경우에서는 오히려 응력의 증가를 보였다. 결론: 임플란트 보철물은 치관/고정체 비가 커질수록 더 큰 응력을 받게 되고, splinting의 효과도 감소하게 된다. 또한 교합하중이 임플란트의 장축을 벗어나거나 중심에서 벗어난 경우 응력이 커지는 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.

• 한국환경과학회지
• /
• 제32권5호
• /
• pp.395-401
• /
• 2023

In this study, 12 environmental factors were used to evaluate the potential habitat of Pteromys volans living around some development areas. The analyzed value ranged from 0 to 20.1, and the area with a score of 10 or less was analyzed to have a low possibility of inhabiting Pteromys volans. To verify the analyzed results, a field survey was conducted on areas with 10 or more scores, and traces of habitat of Pteromys volans were confirmed in areas with 16 or more scores. All the areas with an evaluation score of 16 or higher showed high crown density and age class. However, despite the high crown density and age class, the evaluation score in some areas was low owing to the influence of other environmental factors. Therefore, in evaluating Pteromys volans habitats, it is necessary to apply various and complex criteria suitable for field conditions rather than applying uniform and fragmentary environmental factors only.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.441-450
• /
• 2002

The purpose of this study was compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the lower second premolar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement. The cemented crowns were mounted on the testing jig with inclination of 30 degrees and the universal testing machine was used to measure the fracture strength. The results of this study were as follows : 1. The fracture strength of the ceramic crown with 2.5mm depth and $12^{\circ}$ inclination was the highest (1284 N). Crowns of 1.5mm depth and $8^{\circ}$ inclination had the lowest strength (951 N). 2. There were no significant differences in the fracture strength by axial inclination of the same occlusal depth group. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth.