• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.54-60
• /
• 2004

This study deals with the setting behavior of polystyrene mortars using waste expanded polystyrene(EPS) solution-based binders. The binders for polystyrene mortars are made by mixing crosslinking agent with EPS solutions prepared by dissolving EPS in styrene. Polystyrene mortars are prepared with various EPS concentrations of EPS solutions and crosslinking agent contents, subjected to a dry curing, and tested for working life, peak exotherm temperature and 10h-length change. From the test results, He working lives of polystyrene mortars are shortened with raising EPS concentration of EPS solution and crosslinking agent content. Low-shrinkage or non-shrinkage polystyrene mortars could be obtained by adjusting EPS concentration of EPS solution and crosslinking agent content.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.29-33
• /
• 2012

Solution type pressure sensitive acrylic adhesives were synthesized from 2-ethylhexyl acrylate (2-EHA) as a base monomer and acrylic acid as a functional monomer. The surface energy and basic physical properties of synthesized PSA (pressure sensitive adhesives) were investigated as a function of contents of acrylic acid and crosslinking agent. The structures of adhesive were identified by FTIR. Viscosities and molecular weights of PSA were measured by a Brookfield viscometer and GPC, respectively. Consequently, molecular weight and viscosity increased as the contents of acrylic acid increased up to 6 wt% and then decreased at higher contents. Surface energy increased as the contents of acrylic acid increased owing to the increase of COOH groups, which yielded the enhancement of polarity of PSA. On the other hands, their peel strengths were inversely proportional to molecular weight and showed tendencies of decreasing as the contents of acrylic acid and crosslinking agent increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.512-518
• /
• 1996

Microcapsules containing 2, 4, 4'-trichloro-2-hydroxydiphenyl ether and perfumes were prepared by the coacervation using poly (vinyl alcohol) and crosslinking agents. Effects of dispersing agents, core materials, agitating speed and crosslinking agents on microcapsule size were investigated. The mean and deviation of microcapsule diameters decreased with increasing agitation speed. The diameters of m;crocapsules decreased with increasing dispering agent concentration at 6, 000 rpm of agitation speed, but it was not changed at 10, 000 rpm. The dispering effect of PVA is better than that of gum arabic. The slight increase in the diameter of microcapsule was observed when the amount of core material was increased. As the amount of crosslinking agent was increased, the diameter of microcapsule was decreased.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.596-603
• /
• 2008

To improve the mechanical properties, dimensional stability and blood compatibility, the biomedical material $Pellethene^{(R)}$ was blended with multiblock polyurethane (MPU) containing phospopholipid/long alkyl chain (C-18) at the various MPU contents and crosslinked using dicumyl peroxide as a crosslinking agent. The maximum MPU content for stable $Pellethene^{(R)}$/MPU blended films was approximately 30 wt%. The optimum crosslinking agent content and crosslinking time with respect to the mechanical properties were 4 wt% and 3 h, respectively. The mechanical properties (tensile strength and elongation at break) and water absorption of the crosslinked blend film increased with increasing MPU content. The test of platelet adhesion on the surfaces of the crosslinked blend film showed a decrease in the level of platelet adhesion from 70% to 6% with increasing MPU content from 0 to 30 wt%. These results suggest that the crosslinked $Pellethene^{(R)}$/MPU-30 (MPU content: 30 wt%) sample has strong potential as a novel material for blood compatible material applications.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.445-450
• /
• 2005

Hyaluronic acid-based beads were prepared in order to develop a biomedical material for augumentation. Hyaluronic acid was crosslinked by 1,3-butadiene diepoxide in a suspension state maintained by rapid mixing of soybeen oil and hyaluronic acid solution. The particle size, surface area and swelling ratio were measured to investigate the physical properties of the synthesized beads and the bead surface was examined by scanning electron microscopy. The beads were formed in the range of $5-12vol\%$ concentration of crosslinking agent, which showed monodisperse size distribution. Both BET surface area and swelling ratio decreased as the concentration of either hyaluronic acid or crosslinking agent increased, and crosslinking temperature decreased. Bead size could be effectively controlled by mixing speed without affecting other physical property.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.161-167
• /
• 2002

For the purpose of applying to micro-actuator, thermal properties and displacement of electrostrictive polyurethane(PU) elastomers have been measured. In order to understand an effect of PU component, crosslinking agent are controlled by 0.5 wt% and 1 wt%. DMPA and anther chain extenders were used. PU sample that chain extenders are DMPA is added NaOH for comprehension of effect of ionic groups. The deposited electrode sire on PU films is equal to acrylic holder size when the displacement was measured. Dynamic response according to frequency, displacement and recovery time according to PU thickness were measured. 1 wt% crosslinking agent contents PU samples have higher displacement and lower recovery time than 0.5 wt% crosslinking agent contents PU. If the PU thickness is increased, the actuating voltage for generating of same displacement is increased, too.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.660-666
• /
• 2004

This article describes the change of hand value of chitosan crosslinked cotton fabrics. The chitosan crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH) as crosslinkins agent, 2% aqueous acetic acid as a solvent of chitosan and ECH, and 20% aqueous sodium hydroxide as a mercerizing agent and crosslinking catalyst. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle, mercerized and crosslinked in NaOH solution, and finally wash and dry. Mechanical and physical properties of the chitosan crosslinked fabric were investigated using Kawabata Evaluation System(KES) and other instruments. Tensile energy and tensile strain were decreased with the increase of the concentration of chitosan. Tensile resilience, compression resilience bending rigidity, bending hysteresis, shear stiffness, shear hysteresis, coefficient of friction, geometrical roughness, compression linearity, compressional energy, and thickness were increased with the increase of the concentration of chitosan. On the other hand, bending rigidity, bending hysteresis, coefficient of friction, geometrical roughness, compressional resilience, and thickness were increased with the increase of the concentration of crosslinking agent(epichlorohydrin).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.54.2-54.2
• /
• 2011

DTBP (dimethyl 3,3`-dithiobispropionimidate) was applied to collagen and gelatin coating on BCP granules and a crosslinking agent. The DTBP crosslinking was done for decreasing the solubility of the coating and hence increasing the stability. The nanostructure of collagen and gelatin coating surfaces were observed by SEM technique. Based on the DSC thermograms and FT-IR spectrums, the crosslinkings were confirmed between collagen molecules and gelatin molecules. The compressive strength was measured before crosslinking and after that. In-vitro study was carried out by measuring cell viability and observing cell morphology after DTBP crosslinking. Moreover, the proliferation ability of MG-63 osteoblast-like cells on the crosslinked BCP granules was evaluated by Western blot assay. The BCP granules were implanted into rabbit femur for 4 weeks and 12 weeks. The bone tissue formation was analyzed with micro-computed tomography (micro-CT) and histological analysis was also carried out by hematoxylin and eosin (H&E) staining for visualization of cells.

• Fibers and Polymers
• /
• v.3 no.2
• /
• pp.73-79
• /
• 2002

Nanoscaled PVA fibers were prepared by electrospinning. This paper described the electrospinning process, the processing conditions fiber morphology, and some potential applications of the PVA nato-fibers. PVA fibers with various diameters (50-250 nm) were obtained by changing solution concentration, voltage and tip to collector distance (TCD). The major factor was the concentration of PVA solution which affected the fiber diameter evidently. Increasing the concentration, the fiber diameter was increased, and the amount of beads was reduced even to 0%. The fibers were found be efficiently crosslinked by glyoxal during the curing process. Phosphoric acid was used as a catalyst activator to reduce strength losses during crosslinking. Scanning electron micrograph (SEM) and differential scanning calorimetric (DSC) techniques were employed to characterize the morphology and crosslinking of PVA fibers. It was fecund that the primary factor which affected the crosslinking density was the content of chemical crosslinking agent.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.657-664
• /
• 2001

In this study. the effects of ${\gamma}$-irradiation on the crosslinking of low density poly ethylene (LLDPE) and linear low density polyethylene (LLDPE) containing crosslinking agents were investigated to find the degree of crosslinking in the polymer. The LDPE and LLDPE specimens were prepared by blending crosslinking agents with each polymers, and by hot-press-molding into a sheet at 13$0^{\circ}C$. The ${\gamma}$-irradiation was conducted at 50 to 150 kGy in nitrogen. The crosslinking percentage in these specimens was measured in relation to the irradiation dose and the type of crosslinking agents. The mechanical properties, thermal properties and crystallinity of specimens were examined as a function of irradiation dose as well. It was found that the degree of crosslinking of the irradiated specimens was increased with increasing irradiation dose and by the addition of crosslinking agents. The mechanical properties and thermal properties of specimens were improved in proportion to an increase in the degree of crosslinking. The crystallinity of original resin was decreased with increasing crosslinking density.