• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.80-89
• /
• 1999

The ion exchange resins have been synthesized from chlormethyl styrene-1,4-divinyl benzene(DVB) with 1%, 5%, and 10%-crosslinking and macrocyclic ligand of cryptand type by copolymerization method and the adsorption characteristics of uranium(VI), lead(II) and holmium(III) ions have been investigated in various experimental conditions. The correlation between the adsorption characteristics of rare earths and transition metal on the resins and stability constants of complexes with macrocyclic ligand have been examined. The $UO_2^{2+}$ aqueous solutions are not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The adsorption power was in the order of 1%, 10%, and 5%-crosslinked resin, but adsorptive characteristics of resins decreased in proportion to the order of dielectric constants of solvents.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.683-687
• /
• 2002

We have investigated the effect of the number of ethylene oxide (EO) units inside poly(ethylene glycol)dimethacrylate (PEGDMA) on the ionic conductivity of its gelled polymer electrolyte, whose content ranges from 50 to 80 wt%. PEGDMA gelled polym er electrolytes, a crosslinked structure, were prepared using simple photo-induced radical polymerization by ultraviolet light. The effect of the number of EO on the ionic conductivity was clearly shown in samples of lower liquid electrolyte content. We have concluded that the ionic conductivity increased in proportion to both the number of EO units and the plasticizer content. We have also studied the electrochemical properties of 13PEGDMA (number of EO units is 13) gelled polymer electrolyte.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.121-125
• /
• 2003

Enzymatic polymerization of cardol derived from cashew nut shell liquid have been examined. t-Butyl alcohol aqueous systems showed high yield of polycardol when SBP was as biocatalyst. Compared other solvents, peroxidase actiyity was maintained stable, which was seemed major cause. Solvent aqueous system and concentration of hydrogen peroxide were found to have an influence on the yield and molecular weight distribution of polycardol under the reaction of enzymatic polymerization using peroxidase. The polymer was subjected to the hardening by methyl ethyl ketone peroxide and cobalt naphthenate catalyst, giving a crosslinked tough film. Polycardol was cured rapidly and the hardness increased with time. Finally, the pencil scratch hardness reached to 7H, which is enough hard for industrial uses.

• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.26-33
• /
• 2002

Dyeing properties and crosslinking effect of bifunctional reactive dyes on chitosan fiber were investigated to improve the stability of chitosan fiber against the mild acidic solution and the wet processing. Chitosan fibers were crosslinked with epichlorohydrin for comparing purpose, and dyed with C. I. Reactive Red 194, C. I. Reactive Blue 50, and the reactive dye having two $\alpha$-bromoacrylamide groups at various concentrations. The initial dyeing rates of reactive dyes are rapid and chitosan fibers absorb the relatively large amount of dyes. The chitosan fibers dyed with these dyes show the low degree of swelling and the low solubility in 1 % acetic acid solution and also represent the higher thermal stability The reactive dye with two $\alpha$-bromoacrylamide groups shows higher crosslinking effect than other dyes.

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.156-163
• /
• 2004

The purpose of this study is to investigate the change of handle when cotton fabric is treated with chitosan-polyurethane mixed solution and crosslinked with epichlorohydrin in order to form three-dimensional crosslinks in the molecules, which in turn would improve the wash-fastness of the chitosan-treated fabrics. The application of epichlorohydrin decreased the EM(Tensile extensibility) and WT(Tensile energy) values, indicating the stiffness increased in the treated fabrics due to the 3-dimensional crosslinking. The crosslinking of the cotton fabric samples resulted in the increase in T.H.V. effectively for the use of summer dress shirt fabric.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.1
• /
• pp.17-25
• /
• 1996

Resins with cryptand 22 macrocyclic ligand attached to chloromethylated styrene-1,4-divinylbenzene by substitution reaction were prepared and the effect of pH, metal concentration and cross-linkage of the matrix on the adsorption for $UO_2^{2+}$, $Cd^{2+}$ and $Sm^{3+}$ was investigated. The metal ion was not adsorbed on the resins pH range below 3 but above pH 4 fast adsorption behavior was showed. The resin selectivity determined in ethanol matrix was in increasing order $UO_2^{2+}{\;}>Cd^{2+}{\;}Sm^{3+}$. In addition, these metal ion could be separated on the column packed with 1% crosslinked resin by pH 2.5 $HNO_3$ as an eluent.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.24-31
• /
• 2003

In this research, we applied FT-IR spectroscopy to study the hydrolysis of the ester-crosslinking formed by various polycarboxylic acids on the cotton fabric. We observed the following; (1) the ester-crosslinking is less durable to hydrolysis than ether-crosslinking under all conditions; (2) the ester-crosslinking formed by polycarboxylic acids having more than three carboxyl groups, such as butanetetracarboxylic acid (BTCA), are substantially more durable to hydrolysis than the acids having two or three carboxyl groups, such as maleic and citric acid; (3) alkaline conditions drastically accelerate the hydrolysis of both urea- and ester-crosslinking; and (4) the ester-crosslinking formed by poly(maleic acid) is more resistant to hydrolysis at alkaline conditions than BTCA. (5) polycarboxylic acid molecules were removed from the fabric at same rate as the hydrolysis of the ester linkage. FT-IR spectroscopy has proved to be a useful analytical technique for evaluating the hydrolysis of the crosslinked cotton fabric.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1426-1427
• /
• 2011

전기적, 기계적으로 우수한 성능을 지닌 절연재료인 폴리에틸렌은 장기간 운전 중 열화에 의해 절연성능이 저하되고 시간이 지나면서 케이블의 사고 원인을 제공하게 된다. 본 논문에서 전력용 케이블의 절연체로 널리 사용되고 있는 가교폴리에틸렌(XLPE)를 대신하여 최근 주목을 받고있는 친환경 특성을 부여하기 위한 비가교 폴리에틸렌 재료에 대한 기초적 물성(워터트리성장특성, AC 절연파괴특성, 전도전류 특성)을 실험적으로 비교분석하였다.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.2
• /
• pp.69-81
• /
• 1988

We studied on the synthesis of chloromethylated polystyrene as a precursor of optically active polymers for direct resolution of optical isomers. Changing the degree of crosslinking and the kind of crosslinking agents, several polystyrene resin matrices were synthesized. The matrices were chloromethylated with methylal and chlorosulfonic acid as chloromethylating agents. The effects of solvents of various dielectric constants on the chloromethylation were quantitavely examined. We also synthesized chloromethylated polystyrene of macroreticular type that retained large surface area and good physical stability. The differences between the macroreticular type and macroporous type were investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.123-126
• /
• 2004

We have demonstrated the fabrication of patterned 3D photonic crystals by holographic lithography in conjunction with soft lithography. Holographic lithography created 3D ordered macroporous structures and soft lithography made tailored defects. Because the hard baked photoresist pattern possessed high resistance against the uncured photoresist solution and the refractive index did not change appreciably by hard baking, a crosslinked photoresist was used as a relief pattern for the holographic fabrication of patterned 3D photonic crystals. More complicated defect geometries might be easily obtained with more complicated patterns on PDMS stamps. Moreover, the present results might be used as templates for 3D PCs of highindex defects that can be exploited as optical waveguides and optical circuits.