• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.329-332
• /
• 2005

Cross rolling process is one of incremental forming processes to form an axi-symmetric shaped metal component. It can be classified into two types according to the shape of dies, which are a drum type (roll type) and a plate type (straight type). It can also be classified into a wedge type and a ramp type processes according to deformation characteristics of a material. The ramp type die is applied to plate type cross rolling process in cold forming process for forming of teeth of gear or bolt, while the wedge type die is generally utilized to drum type and plate type cross rolling processes in hot forming process. A shape of the ramp type die is usually same as final shape of a product at every section of a progressing direction, while the shape of the wedge type die has different shapes in a progressing direction. In this paper, a rolling of neck part in a ball stud component has been carried out using the plate type cross rolling process with a ramp shaped die. Forming characteristics have been performed using finite element analysis in order to obtain a proper preform for the ramp type plate cross rolling process.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.815-820
• /
• 2023

본 논문에서는 변형된 구부러진 H-모양 슬롯을 이용한 소형 chipless RFID (radio frequency identification) 태그 설계 방법을 제안하였다. 제안된 변형된 구부러진 H-모양 슬롯은 두께 0.8 mm의 20 mm×50 mm 크기의 FR4 기판의 한쪽에 있는 직사각형 도체 평판에 추가하였다. 기존의 H-모양 슬롯, U-모양 슬롯, 구부러진 H-모양 슬롯을 각각 추가하였을 때와 bistatic 레이다 단면적(RCS; radar cross section)의 공진 딥(dip) 주파수를 비교하였다. H-모양 슬롯, U-모양 슬롯, 구부러진 H-모양 슬롯을 추가하였을 때 시뮬레이션 공진 딥 주파수는 각각 5.907 GHz, 4.918 GHz, 4.364 GHz이었다. 제안된 변형된 구부러진 H-모양 슬롯을 추가하였을 때 공진 딥 주파수는 3.741 GHz로 감소하였고 H-모양 슬롯과 비교하여 슬롯 길이를 36.7% 소형화할 수 있다. 실험 결과, 제작된 변형된 구부러진 H-모양 슬롯이 추가된 chipless RFID 태그의 공진 딥 주파수는 3.9 GHz로 나타났다.

• 한국강구조학회 논문집
• /
• 제28권6호
• /
• pp.467-476
• /
• 2016

모듈러 건축물에서 모듈러 유닛 사이의 접합은 연결 강판을 이용하여 볼트 접합하는 것이 일반적이다. 건축물의 강도는 가장 약한 부분에 의해 결정되며, 접합부는 부재보다 약한 부분이 될 가능성이 있다. 따라서 모듈러 건축물의 안전성을 확인하기 위해 모듈 내부 기둥-보 접합부의 구조성능뿐 아니라 모듈러 유닛과 유닛 접합부의 구조성능도 평가되어야 한다. 이 연구에서는 각형강관 기둥과 ㄷ형강보가 사용된 모듈이 일자형 접합철물과 십자형 접합철물로 연결된 접합부의 거동을 KBC2009 0722.2.4에 따라 모듈의 폭 방향과 길이 방향에 대해 층간 변위각으로 반복 가력을 제어하는 실험을 통해 조사하였다. 실험결과 모든 실험체는 0.04rad 변위각까지 비교적 안적정인 거동을 보였고, 길이 방향 실험체의 결과가 에너지 흡수능력 면에서 좋은 거동을 보였다. 그러나 일자형 연결 강판이 십자형 연결 강판에 비해 변위각이 커질수록 강성이 저하하고, 기둥의 실제 변위각이 늘어나는 결과를 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.109-109
• /
• 2009

This paper represented driving characteristic of a thin-type ultrasonic motor by fabricating and utilizing two kinds of drivers which could generate sinusoidal wave, square wave, respectively. A thin brass plate was used as a cross shaped vibrator and sixteen ceramic plates were attached on upper and bottom side of the brass plate. From the thin stator, elliptical displacements of the four contact tips were obtained. Speed, torque, and current were measured by applying sinusoidal waves through driving equipment such as function generator, power amplifier: to measure characteristic of the motor. As a result, the speed and the torque changed linearly at either driving frequency of 88.6 ~ 87.6[kHz] or voltage of 24~36[V]. Two-drivers which generate sinusoidal waves and square waves were designed respectively, and then were compared through some experiments in order to be put to practical use. In conclusion, the drivers had similar characteristic of speed-torque at similar frequency and voltage. It was able to control the motor linearly by using the driver generating square wave among two-drivers. Besides, it also was possible to make the drivers smaller.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.343-343
• /
• 2008

Newly designed structure of a thin ultrasonic rotary motor was proposed. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on the upper and bottom sides of the brass plate as in Figure 1. The thin type ultrasonic motor has the structure adherent piezoelectric ceramic on the top and bottom surface of the thin elastic body. The direction of polarization is decided so as to occur the elliptical displacement in regular sequence at touch point A, B, C and D of stator contacted with rotor. By applying two electric fields which have 90 degree phase difference on the ceramics, each contact points make rotational displacements as in figure 2. Finite element analysis program ATILA was used to find the optimal size of the stator. As a result of the simulation, elliptical displacements of the tips were obtained at off-resonance frequencies. The maximum displacements of the contact tips were obtained at the length of 16[mm], width of 6[mm] and thickness of 0.4[mm]. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. Elliptical motions of the contact tips. of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 600[rpm] was obtained at 20[Vrms].

• 한국가스학회지
• /
• 제19권4호
• /
• pp.55-61
• /
• 2015

본 연구에서는 여러 가지의 절단면 형상과 하중지지 용량을 높이기 위해 원판을 설치한 중공롤러의 변위거동 특성을 유한요소법으로 해석하였다. FEM 해석결과에 의하면, 중공롤러의 절단면 형상은 외측튜브, 중간튜브, 내측튜브와 이들 튜브들 사이를 연결하기 위해 X형 또는 Y형 컬럼을 설치한 경우는 중공롤러의 중간부에서 발생하는 최대 변위량을 줄여주는 효과가 있다. 여기에 중공롤러의 중간부 두께를 30~40mm 갖는 원판을 설치할 경우는 중공롤러의 최대 변위량을 줄이는데 효과가 크다는 해석결과를 제시하였다. 본 연구에서는 원통롤러의 전체 중량에 연계된 최대 변위량 비율을 고찰한 최적설계 데이터를 제하였다. FEM 해석결과에 의하면, 중공롤러에서 발생하는 최대 변위량과 전체 중량의 비율을 줄인 설계모델로는 4, 5와 6번을 추천할 수 있다.

• 대한기계학회논문집A
• /
• 제41권8호
• /
• pp.703-709
• /
• 2017

본 논문에서는 재분배된 크리프 응력을 근사적으로 접근하기 위해 크리프 해석에 비해 비교적 간단한 탄성 및 탄성-소성 해석법을 사용하여 그 결과와 비교하였다. 탄성해석 결과를 이용하여 $M_{\alpha}-tangent$ method의 Primary Stress와 ASME 코드의 $P_L+P_b/K_t$를 구하였고 탄성-소성 해석 결과를 이용하여 R5 코드의 ${\sigma}^R_{ref}$ 를 구하였다. 용접 형상이 있는 십자 모양의 판 형상에 굽힘 하중, 단축인장 및 이축인장이 작용하는 경우와 r/t가 5, 20인 곡관에 굽힘 하중 및 내압이 작용하는 경우 등 여러 형상에 대한 해석을 수행하였다. 요소 민감도 확인을 위해서는 판 형상에 굽힘 하중이 가해 지는 경우 여러 요소 크기에 대한 해석을 수행하였다. 간략 해석 결과는 크리프 응력과 큰 차이를 보이지 않았지만, $M_{\alpha}-tangent$ method의 경우 요소 크기에 민감하고 ASME코드와 R5코드의 결과는 요소 크기에 민감하지 않았다.

• 소성∙가공
• /
• 제27권5호
• /
• pp.289-295
• /
• 2018

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

• Wind and Structures
• /
• 제9권1호
• /
• pp.59-74
• /
• 2006

Vertical stabilizer plates have been found to be an effective aerodynamic measure to improve the aerodynamic stability of bridges either with an open cross section or with a streamlined box cross section in wind tunnel testings and have been adopted in some long span bridges. By taking an open deck II-shaped section and a closed box section as examples, the mechanism of vertical stabilizer plates for improving aerodynamic stability are investigated by using numerical simulation based on Random Vortex Method. It is found that vertical stabilizer plates can increase the amplitude of the heaving motion, and decrease that of the rotational motion of the bridge decks.

• 복식
• /
• 제58권5호
• /
• pp.13-34
• /
• 2008

In Headgear and Ornaments for Diadem in the Period of the Three States there was Conical Cap(or Pointed Cap), Feathered Cap(Trim), and Crown[Tree-typed Diadem and Tree and Antler-typed Diadem] was excavated from the tombs. Feathered Trim is 5 types, Feathered Trim I-A, Feathered Trim I-B, Feathered Trim II-A, Feathered Trim II-B, Feathered Trim II-C in according to upper part of central insert plate style. Feathered Trim I-A, I-B, II-B type was general style that was found in most of the old tombs in ancient Silla, Gaya. Feathered Trim II-A type was excavated from the only Silla tombs and II-C type was excavated from Gaya tombs. The Ornaments for Diadem in Baekje was excavated from the tombs is adorned with a arranged leaf-stems on either sides and the flower-shaped. They were distinguished with the original mode of Goguryeo and ancient Silla at the time. Tree-typed Diadem is five part in according to the Mountain(;山)-typed piled up. Only one Mountain(;山)-typed one in three stand-up ornament(I-1 type), and three step one in three stand-up one(I-2 type), modification one (I-3 type), three step one of four and five stand-up ones(I-4 type), and four step one of four and five stand-up ones (I-5 type). Tree and Antler-typed Diadem is three part in according to the step of Mountain(; 山)-typed and cross-shaped of the upper part. Three one of three step one of Mountain(;山)-typed and two Antler- typed (II-1 type), cross-shaped one(II-2 type), four step one(II-3 type).