• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2733-2742
• /
• 2020

This paper presents an assessment of applicability of the multigroup cross sections generated with Monte Carlo tools to the fast reactor analysis based on transport calculations. 33-group cross section sets were generated for simple one- (1-D) and two-dimensional (2-D) sodium-cooled fast reactor problems using the SERPENT code and applied to deterministic steady-state and depletion calculations. Relative to the reference continuous-energy SERPENT results, with the transport corrected P₀ scattering cross section, the k-eff value was overestimated by 506 and 588 pcm for 1-D and 2-D problems, respectively, since anisotropic scattering is important in fast reactors. When the scattering order was increased to P₅, the 1-D and 2-D problem errors were increased to 577 and 643 pcm, respectively. A sensitivity and uncertainty analysis with the PERSENT code indicated that these large k-eff errors cannot be attributed to the statistical uncertainties of cross sections and they are likely due to the approximate anisotropic scattering matrices determined by scalar flux weighting. The anisotropic scattering cross sections were alternatively generated using the MC²-3 code and merged with the SERPENT cross sections. The mixed cross section set consistently reduced the errors in k-eff, assembly powers, and nuclide densities. For example, in the 2-D calculation with P3 scattering order, the k-eff error was reduced from 634 pcm to -223 pcm. The maximum error in assembly power was reduced from 2.8% to 0.8% and the RMS error was reduced from 1.4% to 0.4%. The maximum error in the nuclide densities at the end of 12-month depletion that occurred in ²³⁷Np was reduced from 3.4% to 1.5%. The errors of the other nuclides are also reduced consistently, for example, from 1.1% to 0.1% for ²³⁵U, from 2.2% to 0.7% for ²³⁸Pu, and from 1.6% to 0.2% for ²⁴¹Pu. These results indicate that the scalar flux weighted anisotropic scattering cross sections of SERPENT may not be adequate for application to fast reactors where anisotropic scattering is important.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.37-46
• /
• 2013

Many factors about the stability for the reservoir embankments is determined when the facility is completed. Therefore the initial design of the embankment is important. Many researchers focused the effect of soil parameters although the cross section greatly affects the stability and can be controlled in design step. The objective of this research is to analysis of the effects for the safety factor of slope and seepage according to change cross-section in embankment. As a result, the quantity of seepage decreased as the gradient of downstream slope decreased and was proportional to the height of embankments. There was a linear relationship between the gradient of slope and the safety factor of slope. However the gradient of slope did not affect other side slope. All in a relationship, regressive equations with a high correlation coefficient were calculated and can be applied the simple estimation method of the stability using the cross-section. As results of analyzing the sensitivity, the friction angle and permeability critically effect for the slope stability and the seepage, respectively. The effect of the slope gradient was similar to major soil properties.

• Management Science and Financial Engineering
• /
• 제20권1호
• /
• pp.11-16
• /
• 2014

Extending from Grossman and Stiglitz (1980), we provide an asset pricing model of a synchronously traded cross-listed pair under information asymmetry. Following Garbade and Silber (1983), the model further embraces multi-market price discovery in a dynamic framework. The implications are as follows: The price sensitivity of holdings is higher for informed traders than for uninformed traders; the largest cross-border price spread occurs in the absence of arbitrageurs; price discovery is more likely in markets with a larger population of informed traders; and parity convergence accelerates with a higher price elasticity of demand of arbitrageurs.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.281-290
• /
• 2014

In order to properly quantify fission reactor neutronics parameter uncertainties, we have to use covariance data and sensitivity profiles consistently. In the present paper, we establish two consistent methodologies for uncertainty quantification: a self-shielded cross section-based consistent methodology and an infinitely-diluted cross section-based consistent methodology. With these methodologies and the covariance data of uranium-238 nuclear data given in JENDL-3.3, we quantify uncertainties of infinite neutron multiplication factors of light water reactor and fast reactor fuel cells. While an inconsistent methodology gives results which depend on the energy group structure of neutron flux and neutron-nuclide reaction cross section representation, both the consistent methodologies give fair results with no such dependences.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.397-402
• /
• 2015

SCR has been popularly approved as one of the most effective means for NOx emission control in heavy-duty and medium-duty vehicles currently. However, high urea dosing would lead to ammonia slip. And $NH_3$ sensor for vehicle emission applications has not been popularly used in real applications. This paper presents experimental studies on the diesel engine urea-SCR system by using a double NOx sensor system that is arranged in the downstream of the SCR catalyst based on ammonia cross-sensitivity. It was shown that the NOx conversion efficiency rised as $NH_3/NOx$ increases and the ammonia slip started from the $NH_3/NOx$ equal to 1.4. The increase of temperature caused high improvement of the SCR reaction rate while the space velocity had no obvious change. The ammonia slip was in advance as catalyst temperature or space velocity increase and the ammonia storage reduced as catalyst temperature or space velocity increase. The NOx real-time conversion efficiency rised as the ammonia accumulative storage increase and reached the maximum value gradually.

• 대한가정학회지
• /
• 제43권3호
• /
• pp.221-231
• /
• 2005

This study investigated the cross-cultural differences in temperament among Chinese, Korean-Chinese, and Korean children. Subjects were 1,046(258 Korean-Chinese, 290 Chinese, and 498 Korean) 4th graders from Yanji in China and Seoul and Ulsan in Korea. The short form of the Early Adolescent Temperament Questionnaire Scale-Revised containing 10 scales of 54 items was translated into Korean for Korean and Korean-Chinese children and into Chinese for Chinese children and was administered to children via home-room teachers. Chinese children rated themselves higher on activation control, attention, and pleasure- and perceptual-sensitivity subscales than other groups. On the contrary, Chinese-Korean children rated themselves higher on the affiliation subscale and Korean children rated themselves higher on the aggression subscale than other groups. There were larger gender differences among Chinese and Korean-Chinese than among Korean children: Gender difference was found in activation control, aggression, and attention subscales among Chinese children and in affiliation, aggression, attention and fear subscales among Korean-Chinese. There was only significant difference in pleasure sensitivity among Korean. Rapid westernization in Korea seems to be responsible for this result. Since there were significant differences of temperament between Korean and Korean-Chinese, and between Chinese and Korean-Chinese, it was interpreted that children's temperament is influenced by both their environment and genetic endowment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.123-130
• /
• 2002

A general formulation for shape design sensitivity analysis over three dimensional beam structure is developed based on a variational formulation of the beam in linear elasticity. Sensitivity formula is derived based on variational equations in cartesian coordinates using the material derivative concept and adjoint variable method for the displacement and Von-Mises stress functionals. Shape variation is considered for the beam shape in general 3-dimensional direction as well as for the orientation angle of the beam cross section. In the sensitivity expression, the end points evaluation at each beam segment is added to the integral formula, which are summed over the entire structure. The sensitivity formula can be evaluated with generality and ease even by employing piecewise linear design velocity field despite the bending model is fourth order differential equation. For the numerical implementation, commercial software ANSYS is used as analysis tool for the primal and adjoint analysis. Once the design variable set is defined using ANSYS language, shape and orientation variation vector at each node is generated by making finite difference to the shape with respect to each design parameter, and is used for the computation of sensitivity formula. Several numerical examples are taken to show the advantage of the method, in which the accuracy of the sensitivity is evaluated. The results are found excellent even by employing a simple linear function for the design velocity evaluation. Shape optimization is carried out for the geometric design of an archgrid and tilted bridge, which is to minimize maximum stress over the structure while maintaining constant weight. In conclusion, the proposed formulation is a useful and easy tool in finding optimum shape in a variety of the spatial frame structures.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.912-917
• /
• 2007

Many electrochemical power devices such as solid state batteries and solid oxide fuel cell have been studied and developed for solving energy and environmental problems. An amperometric gas sensor usually generates sensing signal of electric current along the proportion of the concentration of target gas under the condition of limiting current. For narrow variations of gas concentration, the amperometric gas sensor can show higher precision than a potentiometric gas sensor does. In additional, cross sensitivities to interfering gases can possibly be mitigated by choosing applied voltage and electrode materials properly. In order to improve the sensitivity to $NO_2$, the device was attached with Au reference electrode to form the amperometric gas sensor device with three electrodes. With the fixed bias voltage being applied between the sensing and counter electrodes, the current between the sensing and reference electrodes was measured as a sensing signal. The response to $NO_2$ gas was obviously enhanced and suppressed with a positive bias, respectively, while the reverse current occurred with a negative bias. The way to enhance the sensitivity of $NO_2$ gas sensor was thus realized. It was shown that the response to $NO_2$ gas could be enhanced sensitivity by changing the bias voltage.

• 한국대기환경학회지
• /
• 제22권4호
• /
• pp.421-430
• /
• 2006

This paper explores a new methodology of socio-statistical survey to classify environmental perception characteristics and to quantify atmospheric environmental sensitivity of neighboring people around a large industrial complex. In order to compensate intrinsic inclination against environmental problems, Atmospheric Environmental Sensitivity Index (AESI) is proposed as the weighted-summation of four representative questions asking the current status of the local air quality, which are chosen by the factor analysis of questionnaire. Atmospheric environmental perception is tried to be classified into interest/indifference characteristics and rational/emotional perception on environmental issues, positive/negative opinion on the solution of environmental problems. According to the chi-square cross-correlation and two-way layout analyses, it was clearly shown that environmental perception is categorized into two major groups, i.e., the positive-rational group having lower AESI and the negative-emotional group having higher AESI which means more seriously senses the status of local air quality.

• 한국간호교육학회지
• /
• 제29권1호
• /
• pp.51-59
• /
• 2023

Purpose: This descriptive cross-sectional study aimed to examine the influence of nurses' moral sensitivity and ethical values on their biomedical ethics awareness. Methods: The study participants included 140 registered nurses working at three hospitals in Jeollabuk-do Province over six months. The data were collected from June 22 to July 3, 2020, and were analyzed using descriptive statistics, an independent t-test, one-way ANOVA, Pearson correlation coefficients, and stepwise multiple regression analysis with the IBM SPSS/WIN 20.0 program. Results: As a result of an analysis using stepwise multiple regression, nurses' biomedical ethics awareness was found to be significantly influenced by ethical values (β=.36, p<.001), moral sensitivity (β=.21, p=.007), and education in biomedical ethics (β=.16, p=.042) (adjusted R²=.21, p<.001). Conclusion: These findings suggest that moral sensitivity and ethical values are key factors in hospital nurses' development of biomedical ethics. Furthermore, the devising and implementing of a practical education program based on practical cases in medical situations to enhance nurses' biomedical ethics awareness is needed.