• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.2
• /
• pp.783-786
• /
• 2015

Background: Utilizing geriatric screening tools for the identification of vulnerable older patients with cancer is important. The aim of this study is to evaluate the hospitalization risk of elderly hematologic cancer patients based on geriatric assessment and laboratory parameters. Materials and Methods: In this cross sectional study 61 patients with hematologic malignancies, age 65 years and older, were assessed at a hematology outpatient clinic. Standard geriatric screening tests; activities of daily living (ADL), instrumental activities of daily living (IADL), Mini Nutritional Assessment (MNA), Mini Mental State Examination (MMSE), timed up and go test (TUG), geriatrics depression scale (GDS) were administered. Demographic and medical data were obtained from patient medical records. The number of hospitalizations in the following six months was then recorded to allow analysis of associations with geriatric assessment tools and laboratory parameters. Results: The median age of the patients, 37 being males, was 66 years. Positive TUG test and declined ADL was found as significant risk factors for hospitalization (p=0.028 and p=0.015 respectively). Correlations of hospitalization with thrombocytopenia, vitamin B12 and folic acid deficiency were statistically significant (p=0.004, p=0.011 and p=0.05 respectively). Conclusions: In this study, geriatric conditions which are usually unrecognized in a regular oncology office visit were identified. Our study indicates TUG and ADL might be use as predictive tests for hospitalization in elderly oncology populations. Also thrombocytopenia, and vitamin B12 and folic acid deficiencies are among the risk factors for hospitalization. The importance of vitamin B12 and folic acid vitamin replacement should not be underestimated in this population.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.510-515
• /
• 2014

Despite the high demand for dental care professionals, high turnover of dental hygienists have been reported, especially among workers in the dental clinics. This study aimed to examine job satisfaction factors affecting dental hygienist's service year in Seoul using cross-sectional data. The questionnaire survey was conducted from August 26, 2013 to September 13, 2013. Data were collected from 296 employees of dental clinics and hospitals located in Seoul. Logistic regression analysis was applied for parameter estimates, using PASW Statistics 18.0 and R software version 3.0.3. The Cronbach's ${\alpha}$ for the total job satisfaction factors was 0.922. In descriptive statistics, the group (that less than four years of working and over four years of working) had a statistically significant difference in age, religion, experience of turnover and autonomous factor among job satisfaction factors. In multiple logistic regression model, autonomy in job satisfaction was an important factor to predict the length of service in dental hygienist (odds ratio, 2.65; 95% confidence interval, 1.06~6.60). Autonomous factor was a significant predictor of length of service for dental hygienist. This study encourages future investigations of the role of job satisfaction of service year using better analytical frameworks.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.261-273
• /
• 2011

Recently, the demands for steel frame are increasing because of the trend and due to the demand for bigger and higher buildings. In the analysis of typical steel frame, connections are based on the idealized fixed or pinned connection. A fixed connection assumes that the relative angle of each member before deformation is the same after the transformation. Therefore, the stiffener reinforces the connection to sufficient rigidity and stability of the panel zone. In the economical aspect, however, the necessity of connection that the stiffener reinforcement has omitted is increasing due to the excessive production as well as labor costs of connection. In contrast, pinned connection is assumed that bending moments between the beams and columns do not transfer to each member. This is easy to make in the plant and the construction is simple. However, the structural efficiency is reduced in pinned connection because connection cannot transfer moments. The introduction of this semirigid process can decide efficient cross-sectional dimensions that promote ease in the course of structural erection, as performed by members in the field-a call for safety in the entire frame. Therefore, foreign countries exert efforts to study the practical behavior and the results are applied to criterion. This paper analyzes the semirigid connection of domestic steel by design specifications of AISC/LRFD and make data bank that pertain to each steel. After wards, the results are compared to those of idealized connection; at the same time, this paper presents a design method that matches economic efficiency, end-fixity, and rotational stiffness.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.402-408
• /
• 2013

PURPOSE. The aim of this study was to evaluate the surface properties and in vitro bioactivity to osteoblasts of magnesium and magnesium-hydroxyapatite coated titanium. MATERIALS AND METHODS. Themagnesium (Mg) and magnesium-hydroxyapatite (Mg-HA) coatings on titanium (Ti) substrates were prepared by radio frequency (RF) and direct current (DC) magnetron sputtering.The samples were divided into non-coated smooth Ti (Ti-S group), Mg coatinggroup (Ti-Mg group), and Mg-HA coating group (Ti-MgHA group).The surface properties were evaluated using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The surface roughness was evaluated by atomic force microscopy (AFM). Cell adhesion, cell proliferation and alkaline phosphatase (ALP) activity were evaluated using MC3T3-E1 cells. Reverse transcription polymerase chain reaction (RT-PCR) analysis was performed. RESULTS. Cross-sectional SEM images showed that Mg and Mg-HA depositionson titanium substrates were performed successfully. The surface roughness appeared to be similaramong the three groups. Ti-MgHA and Ti-Mg group had improved cellular responses with regard to the proliferation, alkaline phosphatase (ALP) activity, and bone-associated markers, such as bone sialoprotein (BSP) and osteocalcin (OCN) mRNA compared to those of Ti-S group. However, the differences between Ti-Mg group and Ti-MgHA group were not significant, in spite of the tendency of higher proliferation, ALP activity and BSP expression in Ti-MgHA group. CONCLUSION. Mg and Mg-HAcoatings could stimulate the differentiation into osteoblastic MC3T3-E1 cells, potentially contributing to rapid osseointegration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.2
• /
• pp.173-180
• /
• 2006

Objectives The aim of this study is to compare the quality of root canal preparation completed using MFile-$System^{(R)}$ instrument ( Komet, Gebr.Brsaseler, Germany) and conventional stainless steel file in the canals of Maxillary molar teeth that had a canal curvature between $25^{\circ}$ or more Materials & Methods Buccal canals of 24 first and second maxillary molar teeth, extracted for periodontal and prosthetic reasons were used. Tissue fragments and calcified debris were removed from teeth by scaling and the teeth were stored in 10% formalin solution for 24 hour. Then, teeth were stored in saline until used. To be included the roots had to have completed formed apices and angle of curvature ranging between $25^{\circ}$ or more according to the criteria described by Schneider(1971). Palatal and Second mesiobuccal canals were not included. Teeth were embedded into transparent acrylic. The teeth were randomly divided into two experimental groups. All teeth were scanned by Dental CT (PSR9000N, Asahi, Japan) to determine the root canal shape before instrumentation. Image slices were prepared from the apical end point to the pulp chamber. The first two sections were 2 mm from the apical end of root and 2 mm below the orifice. Further section was recorded, dividing the distance between the sections of apical and coronal levels into two equal lengths. 12 teeth were instrumented using stainless steel fileand another 12 teeth were instrumented using MFile-$System^{(R)}$. Following the completion of the instrumentation, the teeth were again scanned and compared with the cross sectional images taken prior to canal preparation. Amount of transportation and centering ability was assessed. Student's t-test was used for statistical analysis. Result Less transportation occurred with MFile-$System^{(R)}$ rotary instrumentation than stainless steel instrument. MFile-$System^{(R)}$ had better centering ability than stainless steel instrument. Conclusion MFile-$System^{(R)}$ rotary instrumentation transported canals less and had good centering ability.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.67-85
• /
• 2009

This study aims to provide the research for dental technician's stress prevention and management with basic materials by understanding dental technician's psychosocial stress level and examining relevant factors. The subject of this study is 255 dental technologists who work mainly in Seoul Gyeonggi district for a month of April of 2009 and I conducted cross-sectional study through self administered survey. The contents of survey include general feature, occupational feature, health behavior feature. I used Karasek's Job Content Questionnaire, JCQ and Psychosocial well-being index, PWI-SF as means of measurement. To compare the level of dental technician's psychosocial stress, I conducted t-test and ANOVA and I measured the factors that are related with psychosocial stress symptom with step by step multiple regressive analysis. According to the result of Cronbach's a value which is yielded to verify the reliability of means of measurement, the reliability of concept is sufficient. The detailed result of this study is as follows. 1. According to the result of analyzing the stress symptom in accordance with general feature and occupational feature, those dental technologists who are older and not married, graduate from junior college, have lower position, work at university hospital or general hospital show lower stress(p<0.05). There is no difference in the level of psychosocial stress with regard to duty related feature, period of service, daily average working hours, monthly average pay. 2. With regard to health behavior feature, those dental technologists who control weight better and have meal more regularly show lower stress(p<0.05). Those dental technicians who smoke, drink liquid and take a suitable sleep show low stress but the difference does not have significance statistically. 3. With regard to the factors of stress in the workplace, those dental technicians who have lower duty related requirement, have higher duty related control ability, have higher social support, have less instability of employment and have less workload and physical burden show lower stress(p<0.05). 4. According to the result of analyzing the factors that influence dental technologist's stress symptom, social support has the most enormous influence on stress symptom. Unstable employment, regular exercise, regular eating, daily average sleeping hours and technological capacity are also important in this order. According to the result of this study, those dental technicians who have higher social support, less instability of employment, do exercise more regularly, take enough sleep more soundly and have higher technological capacity show lower psychosocial stress symptom. Therefore, to adjust appropriately the dental technician's stress and properly maintain and improve the dental technician's mental health, effective management plan that enables dental technicians to maintain smooth human relationships for dental technicians should be sought. In addition, heath education and health management for dental technicians should be given more thoroughly so that they can establish desirable health behavior in daily life.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• Korean Business Review
• /
• v.22 no.1
• /
• pp.77-101
• /
• 2009

The main purpose of this study is to assess the effect of using Balanced Scorecard, and relationship among learning and growth performance, internal business performance, customer performance, financial performance, and business performance. To achieve this study, theoretical and empirical studies related to Balanced Scorecard were carried out simultaneously. A field survey was undertaken through questionnaire sampling a population of construction firms. The established hypotheses related to Balanced Scorecard and organizational performance were verified by the paired-t test analysis using SPSS. The result of this research are as follows : First, BSC firm's learning and growth performance are higher than those of before BSC adopting firms significantly. Second, BSC firm's internal business performance level is higher than that of before BSC firm's significantly. Third, BSC firm's customer performance level is higher than that of before BSC firm's significantly. Fourth, BSC firm's financial performance level is higher than that of before BSC firm's significantly. Fifth, BSC firm's Business performance level is higher than that of before BSC firm's significantly. This study contributes to the BSC research by being the study focus on the BSC at the general indicators and provides evidence that may help understanding the possible relationship between BSC adoption and improvement of organizational performance. There are some limitations, however, of this study. The result are based on a cross sectional sample of construction firms, which may not be reflective of the entire population.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.17 no.1
• /
• pp.3-9
• /
• 2006

Objectives: Obesity is one of risk factors for psychological and social adjustment problems (depression, low self esteem, low school function etc). Quality of life(QOL) is comprehensive and multidimensional construct including physical, emotional, social and school functioning. Some authors reported that child and adolescent obesity is associated with impaired QOL. This study was to examine the association between QOL and body mass index (BMI) in middle school students. Methods : Cross sectional analysis of 471 adolescents between the ages of 13 and 14 years ($mean{\pm}SD,\;13.4{\pm}0.6$), who attended one of middle schools in Seoul, Korea. Participants' QOL were scored by using Korean version of pediatric QOL inventory generic score scale ($PedsQL^{TM}$ 4.0). Participants had a $mean{\pm}SD\;BMI\;of\;21.3{\pm}4.0$. Self reports and parent proxy reports using $PedsQL^{TM}$ 4.0 were administered to measure participant's QOL. Participants were divided into four groups by BMI (Male: obesity group >26.5, at risk group 23.2-26.5, normal weight group 15.8-23.1, underweight group <15.8, Female : obesity group >25.2, at risk group 22.9-25.2, normal weight group 16.0-22.8, underweight group <16.0). Results : Compared with other groups, obese adolescents reported significantly(p<0.01) love. QOL in all domains. Obese adolescents were more likely to have impaired QOL than normal weight adolescents (Odds Ratio, 8.3, 95% confidence interval, 4.0-16.7). Conclusion : Obese adolescents have lower QOL than normal weight adolescents. Psychiatrist, parents, and teachers need to be informed of the risk fur impaired QOL in obese adolescents to target interventions that could enhance health outcomes.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.365-373
• /
• 2016

Ultra-High-Performance Steel Fiber-Reinforced Concrete (SUPER Concrete) exhibits improved compressive and tensile strengths far superior to those of conventional concrete. These characteristics can significantly reduce the cross sectional area of the member and the anchorage strength of a headed bar is expected to be improved. In this study, the anchorage strengths of headed bars with $4d_b$ or $6d_b$ embedment length were evaluated by simulated exterior beam-column joint tests where the headed bars were used as beam bars and the joints were cast of 120 or 180 MPa SUPER Concrete. In all specimens, the actual yield strengths of the headed bars over 600 MPa were developed. Some headed bars were fractured due to the high anchorage capacity in SUPER Concrete. Therefore, the headed bar with only $4d_b$ embedment length in 120 MPa SUPER Concrete can develop a yield strength of 600 MPa which is the highest design yield strength permitted by the KCI design code. The previous model derived from tests with normal concrete and the current design code underestimate the anchorage capacity of the headed bar anchored in SUPER Concrete. Because the previous model and the current design code do not consider the effects of the high tensile strength of SUPER Concrete. From a regression analysis assuming that the anchorage strength is proportional to $(f_{ck})^{\alpha}$, the model for predicting anchorage strength of headed bars in SUPER Concrete is developed. The average and coefficient of variation of the test-to-prediction values are 1.01 and 5%, respectively.