• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.19-33
• /
• 2008

A method that is adaptively selecting among previous fast motion estimation algorithms and a newly proposed fast motion estimation algorithm(UCDS) is presented in this paper. The algorithm named AUDC and a newly proposed fast motion estimation algorithms are based on the Diamond Search(DS) algorithm and Three Step Search(TSS). Although many previous fast motion estimation algorithms have lots of advantages, those have lots of disadvantages. So we thought better adaptive selection of fast motion estimation algorithms than only using one fast motion estimation algorithm. Therefore, we propose AUDC that is using length of the MV, Search Point, SAD of the neighboring block and adaptively selecting among Cross Three Step Search(CTSS), Diamond Search(DS) and Ungraded Cross Diamond Search(UCDS). Experimental results show that the AUDC is much more robust, provides a faster searching speed, and smaller distortions than other popular fast block-matching at algorithms.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.335-338
• /
• 1988

A numerical method is presented for the scattering by the perfectly conducting cylinder with arbitrary cross sections. The relevant integral equation considered by the E-field formulation is solved by method of moments, and thereby the surface current induced as well as the radar cross section of the scatterer are numerically computed to specify the scattering nature of the scatterer. Two separate methods, one with point matching and the other Galerkin's method, are considered to make cross checks to the results obtained. Taking two half pulses suggested to expand the surface current shows savings in computation time and accurate solutions for the corners on the scatterer.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.7-11
• /
• 2001

In this paper, trapezoid sections and prominence sections were examined to improve the performance of floating breakwater in long waves. The linear potential theory is used and the boundary element method with a matching boundary is employed for numerical computation. The effects of the side slope of the trapezoid section and the geometry ratio of the prominence section on the floating breakwater were examined. It was found that trapezoid sections show lower transmission coefficients than the rectangular sections in the long wave range. In prominence sections the size of the sides are more important than the size of the top. Proper choices of the pontoon type geometry may move the local minimum point of the wave transmission coefficient toward the longer wave ranges and improve the performance of the floating breakwater in the long wave range for a given wave period.

• Korean Journal of Remote Sensing
• /
• v.40 no.4
• /
• pp.387-396
• /
• 2024

Most very high-resolution (VHR) satellite images provide rational polynomial coefficients (RPC) data to facilitate the transformation between ground coordinates and image coordinates. However, initial RPC often contains geometric errors, necessitating correction through matching with ground control points (GCPs). A GCP chip is a small image patch extracted from an orthorectified image together with height information of the center point, which can be directly used for geometric correction. Many studies have focused on area-based matching methods to accurately align GCP chips with VHR satellite images. In cases with seasonal differences or changed areas, edge-based algorithms are often used for matching due to the difficulty of relying solely on pixel values. However, traditional edge extraction algorithms,such as canny edge detectors, require appropriate threshold settings tailored to the spectral characteristics of satellite images. Therefore, this study utilizes deep learning-based edge information that is insensitive to the regional characteristics of satellite images for matching. Specifically,we use a pretrained pixel difference network (PiDiNet) to generate the edge maps for both satellite images and GCP chips. These edge maps are then used as input for normalized cross-correlation (NCC) and relative edge cross-correlation (RECC) to identify the peak points with the highest correlation between the two edge maps. To remove mismatched pairs and thus obtain the bias-compensated RPC, we iteratively apply the data snooping. Finally, we compare the results qualitatively and quantitatively with those obtained from traditional NCC and RECC methods. The PiDiNet network approach achieved high matching accuracy with root mean square error (RMSE) values ranging from 0.3 to 0.9 pixels. However, the PiDiNet-generated edges were thicker compared to those from the canny method, leading to slightly lower registration accuracy in some images. Nevertheless, PiDiNet consistently produced characteristic edge information, allowing for successful matching even in challenging regions. This study demonstrates that improving the robustness of edge-based registration methods can facilitate effective registration across diverse regions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1683-1689
• /
• 2014

In this paper, we propose an image processing based time-frequency domain reflectometry(TFDR) in order to estimate the fault location of a cable. The Wigner-Ville distribution is used for analysis in both the time domain and the frequency domain when the conventional TFDR estimates the fault location in a cable. However, the Winger-Ville distribution is a bi-linear function, and hence the cross-term is occurred. The conventional TFDR cannot estimate the accurate fault location due to the cross-term in case the fault location is close to the position where the reference signal is applied to the cable. The proposed method can reduce the cross-term effectively using binarization and morphological image processing, and can estimate the fault location more accurately using the template matching based cross correlation compared to the conventional TFDR. To prove the performance of the proposed method, the actual experiments are carried out in some cases.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.357-371
• /
• 2005

In this Paper, we propose a new motion search algorithm called CDTS (Cross-Diamond-Triangle Search algorithm) that uses optimal search pattern according to the position of a search area to improve the performance of CDS(Cross-Diamond Search algorithm) as well as CDHSs(Cross-Diamond-Hexagonal Searches algorithms). We analyze motion distributions in various test video sequences to apply optimal search pattern according to a position of search area. Based on the result of this analysis, we propose a new triangle-shaped search pattern whose structure is asymmetric while previous search patterns are generally symmetric in conventional algorithms. In CDTS, we apply cross- and diamond-shaped search patterns to central search areas, and triangle- and diamond-shaped patterns to the other areas. Applying CDTS to test video sequences, the proposed scheme can reduce search points more than CDS and CDHSs by 16.22$\%$ and 3.09$\%$, respectively, without any visual quality degradation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.489-496
• /
• 2019

In this paper, we design and fabricate an ultra small dual crossed dipole antenna operating at 2.4 GHz frequency. In order to miniaturize the size of the antenna so that it can be applied to a mobile device, a cross dipole is disposed on the upper two layers and a reflection plane, a horizontal matching circuit and a ground plane are arranged on each layer. The circuit was connected by a vertical through-hole. The size of the fabricated antenna is $21.61mm{\times}16.88mm{\times}1.27mm$, the measured reflection coefficient is -31.5 dB, and the bandwidth below -10 dB is 112 MHz. In addition, since the gain of the antenna is -4 dBi, it has the omnidirectional radiation characteristic, so it can be applied to various fields as an antenna for mobile devices.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.1 s.10
• /
• pp.7-13
• /
• 2001

In developing a multistage compressor, the stage matching is one of the critical design issues. The mismatching can be often observed even if each stage has been proven good and then used as part of a compression system. A good matching among the stages can be achieved by changing various design parameters (i.e., passage cross sectional areas, blades angles, stagger angles, curvature, solidity, etc.). Therefore, designers need to find out what parameters must be changed and how much. In this study, a method to search the design parameters for optimum stage matching has been used based on an 1-D mathematical model of a compressor, which uses the data obtained from the preliminary test to identify the design parameters. This methodology is applied with a two-stage axial compressor, which was originally designed for a helicopter gas turbine engine. After identifying design parameters using preliminary test data, an optimization process has been employed to achieve the best matching between the stages (i.e., maximum efficiency of the compressor at its operation modes within a given range of the rotor speed under given restrictions for required stall margins and mass flow). 3-D flow calculations have been performed to confirm the usefulness of the corrections based on the 1-D mathematical model. Calculational results agree well with the experimental data in view of the performance characteristics. Some promising results were produced through the methodology proposed in this paper in conjunction with flow calculations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.1
• /
• pp.11-17
• /
• 2020

This study proposes a novel structure for the cross-eye, one of the representative jamming techniques of monopulse sensors. The proposed jammer tranceivers are composed of multi-channels with phased array antenna. We named this structure PRCJ(Phased array Retrodicetive Cross-eye Jammer). In this structure, formulas for calculating cross-eye gain and distance error are derived. We compare the properties of PRCJ with two-element retrodiredtive cross-eye jammer(TRCJ). PRCJ can achieve higher J/S because this structure can steer the spatially combined jamming signal in the direction of the incident monopulse signal. Because of the multiple channels in the phased array, it also increases the degree of freedom of channel matching. Finally, We preform a statistical analysis of the cross-eye gain according to the amplitude and phase errors. From this results, It has been found that PRCJ can get higher cross-eye gain than TRCJ.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.949-954
• /
• 2012

The K-PCS and W-CDMA dual band dielectric duplexer and bandpass filters have been designed and fabricated. The dual band duplexer consists of the separate monoblock K-PCS and W-CDMA duplexers using common antenna port. The coupling capacitance and I/O impedance matching have been designed to minimize the cross interference between the bands. Isolations of crosspoint between Tx and Rx in K-PCS and W-CDMA dualband were about 47 dB and 100 dB, respectively. On the other hand, isolations of Tx and Rx in K-PCS and W-CDMA were about 66 dB and 65 dB, respectively. The difference between 47 dB and 100 dB originated from the different center frequencies in Tx and Rx of K-PCS and W-CDMA bands. The coupling capacitance of the bandwidth, I/O capacitance of I/O matching and impedance matching, and various capacitances were important role to fabricate the dielectric duplexer and bandpass filters.