• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.57-69
• /
• 1995

폭풍해일에 의한 쇄파대내에서의 표사이동을 예측할 수 있는 유한차분 수치모형을 개발하였다. 이동 경계조건을 가지는 비제차 확산방정식을 사용하여 개발된 수치모형은 Kriebel과 Dean(1985)의 수치모형이 가지고 있는 많은 제약성을 해결할 수 있었다. 임의의 초기단면과, 시간에 따른 폭풍해일의 스펙트럼을 이용하여 계산된 수치모형의 결과는 표사량의 보존 및 해안선이 후퇴나 쇄파점의 이동을 잘 나타내 주며, 해석해 및 관측자료 그리고 실험자료와 매우 잘 일치한다. 수치모형과 관련된 제반 변수들의 민감도를 분석하여 수치모형 적용의 편의를 도모하였으며, 해안선 단면을 따른 표사의 입경변화 효과를 부여할 수 있음을 알았다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.185-190
• /
• 1996

RFSP is a computer program to do fuel management calculations for CANDU reactors. Its main function is to calculate neutron flux and power distributions using two-energy-group, three dimensional neutron diffusion theory. However, up to now the treatment has not been true two-group but actually "one-and-half groups". In other words, the previous (1.5-group) version of RFSP lumps the fast fission term into the thermal fission term. This is based on the POWDERPUFS-V Westcott convention. Also, there is no up-scattering term or bundle power over cell flux (H1 factor) for the fast group. While POWDERPUFS-V provides only 1.5 group properties, true two-group cross sections for the design and analysis of CAUDU reactors can be obtained from WIMS-AECL. To treat the full two-group properties, the previous RFSP version was modified by adding the fast fission, up-scatter terms, and H1 factor. This two-group version of RFSP is a convenient tool to accept lattice properties from any advanced lattice code (e.g. WIMS-AECL DRAGON, HELIOS...) and to apply to advanced fuel cycles. In this study, the modification to implement the true two-group treatment was performed only in the subroutines of the ＊SIMULATE module of RFSP. This module is the appropriate one to modify first, since it is used for the tracking of reactor operating histories. The modified two-group RFSP was evaluated with true two-group cross sections from WIMS-AECL. Some tests were performed to verify the modified two-group RFSP and to evaluate the effects of fast fission and up-scatter for three core conditions and four cases corresponding to each condition. The comparisons show that the two-group results are quite reasonable and serve as a verification of the modifications made to RFSP. To assess the long-term impact of the full 2-group treatment, it is necessary to simulate a long period (several months) of reactor history. It will also be necessary to implement the full two-group treatment of reactivity devices and assess the reactivity-device worths.ce worths.

• 멤브레인
• /
• 제15권4호
• /
• pp.297-309
• /
• 2005

다수의 잠재적인 내분비계장애물질이 환경에 방출됨으로써 새로운 환경문제로 세계적 관심이 모아지고 있다. 이러한 물질들을 측정하고 감시하기 위한 고감도이며 신뢰성 있는 분석방법의 개발이 필수적이다. 이 연구에서는 기체크 로마토그래피 질량분석법과 액체크로마토그래피 질량분석법이 내분비계장애물질들의 분석을 위해 이용되었으며 두 가지 분석방법들이 DEHP, BBP, PCP, BPA에 대해 비교 및 평가되었다 그 결과 액체크로마토그래피 질량분석법이 더 낮은 검출 한계를 나타내는 것으로 조사되었다. 또한 액체크로마토그래피 질량분석법은 대부분의 순수한 분자들로서 내분비계장애물질들을 측정 가능함이 판명되었다. 이 연구에서는 음용수에서 내분비계장애물질들을 제거하는 방법으로 유기막과 세라믹막을 제시하였으며 십자류 나노여과 방식이 내분비계장애물질들을 $100\%$ 제거하는 것으로 조사되었고 분획분자량 250 나노여과는 내분비계장애물질을 제거함에 있어 효과적인 것으로 판명되었다. 나노여과, 고속한외여과, 저속한외여과의 투과플럭스와 물질전달계수와의 비는 0.67, 3.4, 그리고 0.44였으며 나노여과와 저속한외여과는 확산이 주요한 조건에서 운전되며 고속한외여과는 대류가 주요한 조건에서 운전된다. 더욱이, 확산이 주요한 나노여과와 저속한외여과에서 내분비계장애물질의 제거율이 높은 것으로 측정되었다. 한외여과에 의한 제거는 내분비계장애물질들의 분자량에 의존하는 것으로 조사되었으며 내분비계장애물질들은 확산이 주요한 수리동역학적 조건에서 제거됨이 판명되었다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.357-364
• /
• 2016

Purpose: This study was performed to define the drying characteristics of sorghum by developing thin layer drying equations and evaluating various grain drying equations. Thin layer drying equations lay the foundation characteristics to establish the thick layer drying equations, which can be adopted to determine the design conditions for an agricultural dryer. Methods: The drying rate of sorghum was measured under three levels of drying temperature ($40^{\circ}C$, $50^{\circ}C$, and $60^{\circ}C$) and relative humidity (30%, 40%, and 50%) to analyze the drying process and investigate the drying conditions. The drying experiment was performed until the weight of sorghum became constant. The experimental constants of four thin layer drying models were determined by developing a non-linear regression model along with the drying experiment results. Result: The half response time (moisture ratio = 0.5) of drying, which is an index of the drying rate, was increased as the drying temperature was high and relative humidity was low. When the drying temperature was $40^{\circ}C$ at a relative humidity (RH) of 50%, the maximum half response time of drying was 2.8 h. Contrastingly, the maximum half response time of drying was 1.2 h when the drying temperature was $60^{\circ}C$ at 30% RH. The coefficient of determination for the Lewis model, simplified diffusion model, Page model, and Thompson model was respectively 0.9976, 0.9977, 0.9340, and 0.9783. The Lewis model and the simplified diffusion model satisfied the drying conditions by showing the average coefficient of determination of the experimental constants and predicted values of the model as 0.9976 and Root Mean Square Error (RMSE) of 0.0236. Conclusion: The simplified diffusion model was the most suitable for every drying condition of drying temperature and relative humidity, and the model for the thin layer drying is expected to be useful to develop the thick layer drying model.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.337-341
• /
• 2012

Mechanochemical processing (MCP) involves several high-energy collisions of powder particles with the milling media and results in the increased reactivity/sinterability of powder. The present paper shows results of mechanochemical processing (MCP) of silicon nitride powder mixture with the relevant sintering additives. The effects of MCP were studied by structural changes of powder particles themselves as well as by the resulting sintering/densification ability. It has been found that MCP significantly enhances reactivity and sinterability of the resultant material: silicon nitride ceramics could be pressureless sintered at $1500^{\circ}C$. Nevertheless, a degree of a silicon nitride crystal lattice and powder particle destruction (amorphization) as detected by XRD studies, is limited by the specific threshold. If that value is crossed then particle's surface damage effects are prevailing thus severe evaporation overdominates mass transport at elevated temperature. It is discussed that the cross-solid interaction between particles of various chemical composition, triggered by many different factors during mechanochemical processing, including a short-range diffusion in silicon nitride particles after collisions with other types of particles plays more important role in enhanced reactivity of tested compositions than amorphization of the crystal lattice itself. Controlled deagglomeration of $Si_3N_4$ particles during the course of high-energy milling was also considered.

• Journal of Photoscience
• /
• 제10권2호
• /
• pp.199-202
• /
• 2003

The relationship between the morphology of nanostructured TiO$_2$ films and the photo-injected electron transport has been investigated using intensity-modulated photocurrent spectroscopy (IMPS). For this purpose, three different TiO$_2$ films with 5 ${\mu}{\textrm}{m}$ thickness are prepared: The rutile TiO$_2$ film with 500 nm-sized cluster-like spherical bundles composed of the individual needles (Tl), the rutile TiO$_2$ film made up of non-oriented, homogeneously distributed rod-shaped particles having a dimension of approximately 20${\times}$80 nm (T2), and the anatase TiO$_2$ film with 20 nm-sized spherically shaped particles (T3). Cross sectional scanning electron micrographs show that all of the TiO$_2$films have a quite different particle packing density: poorly packed Tl film, loosely packed T2 film and densely packed T3 film. The electron transport is found to be significantly influenced by film morphology. The effective electron diffusion coefficient D$_{eff}$ derived from the IMPS time constant is an order of magnitude lower for T2 than for T3, but the D$_{eff}$ for the Tl sample is much lower than T2. These differences in the rate of electron transport are ascribed to differences in the extent of interparticle connectivity associated with the particle packing density.ity.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.593-603
• /
• 2005

Passive sampler using 4-amino-3-hydrazino-5-mercapto-1, 2, 4-triazole (AHMT) was developed to determine formaldehyde in indoor environment. The chromatography paper cleaned by $3\%$ hydrogen peroxide solution was experimently determined as a optimum absorbtion filter for the collection of formaldehyde. The passive sampler with a broad cross-sectional area and a short diffusion length was quite good in sensitivity. The passive sampler and the active sampling method with an impinger were strongly correlated with a correlation coefficient of 0.9848. The limits of detection and quantification of the passive sampler for the measurement of formaldehyde in the indoor environment were 7.5 and 10.2 ppb, respectively. Temperature ($19\∼28^{circ}C$) and relative humidity ($30\∼90\%$) had slight influence on the sampling rate of the passive sampler. However, the increase of flow velocity on the surface of sampler resulted in the increase of sampling rate.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.564-570
• /
• 2006

Silicides have been required to be below 40 nm-thick and to have low contact resistance without agglomeration at high silicidation temperature. We fabricated composite silicide layers on the wafers from Ni(20 nm)/Co(20 nm)/poly-Si(70 nm) structure by rapid thermal annealing of $700{\sim}1100^{\circ}C$ for 40 seconds. The sheet resistance, surface composition, cross-sectional microstructure, and surface roughness were investigated by a four point probe, a X-ray diffractometer, an Auger electron spectroscopy, a field emission scanning electron microscope, and a scanning probe microscope, respectively. The sheet resistance increased abruptly while thickness decreased as silicidation temperature increased. We propose that the fast metal diffusion along the silicon grain boundary lead to the poly silicon mixing and inversion. Our results imply that we may consider the serious thermal instability in designing and process for the sub-0.1 um CMOS devices.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.1-3
• /
• 2005

Superconducting $MgB_2$ fibers are in-situ grown by a diffusion method. The fibers are prepared by exposing B filaments to Mg vapor inside a folded Ta foil over a wide range of temperature and growth time. The materials are sealed inside a quartz tube by gas welding. The as - grown fibers are characterized by scanning electron microscopy and energy dispersive x - ray analysis. The fibers have a diameter of about $110{\mu}m$. Surface morphology of the fibers looks dependent on growth temperature and mixing ratio of Mg and B. Radial distribution of Mg ions into B is observed and analyzed over the cross - sectional area. Transport properties of the $MgB_2$ fibers are examined by a physical property measurement system. The $MgB_2$ fibers grown at $900^{\circ}C$ for 2 hours show a superconducting transition at 39.8K with ${\Delta}T_c<$ 2.0 K. Resistance at room temperature $MgB_2$ is 3.745 $\Omega$ and residual resistivity ratio (RRR) is estimated as 4.723.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.202-202
• /
• 2008

The world gross market of many kinds of electronics, such as TV and mobile phone has been increasing rapidly these days. It is mainly caused by the amazing developments of IT technology during past decade and the changes of individual life style for the better. Thanks to the increases of electronics manufactured in quantity, much more electronic components such as MLCC (multi layer ceramic capacitor) and PCB (printed circuit board), which are our main products, have been needed as a consequence. Though it was reported that total market of electronic components exceeds several hundreds of billion dollars, there are many manufactures struggling for survival in the competition of electronics components. Then the recognition of quality as a key technology has spread and the efforts for high-yield production lines have been kept in many companies. In this paper, our efforts to eliminate the contamination of particles and the diffusion of some volatile organic compounds which is very harmful to workers at production line have been introduced.