1 |
T. Nishimura, X. Xu, K. Kimoto, N. Hirosaki, and H. Tanaka, "Fabrication of Silicon Nitrice Nanoceramics - Powder Preparation and Sintering: A Review," Sci. Technol. Adv. Mat., 8 635-43 (2007).
DOI
|
2 |
F.I. Buliae, I.Zalite, and N. Zhilinska, "Comparison of Plasma-chemical Sythesized SiAlON Nanopowder and Conventional Prepared SiAlON Powder," J. Eur. Ceram. Soc., 24 3303-8 (2004).
DOI
|
3 |
A. Bellosi, J.Vicens, V.Medri, and S.Guicciardi , "Nanosize Silicon Nitride: Characteristic of Doped Powders and of the Related Sintered Materials," Appl. Phys. A, 81 1045-52 (2005).
DOI
|
4 |
M. Herrmann, I. Schultz, and I. Zalite, "Materials Based on Nanosized Composite Powders," J. Eur. Ceram. Soc., 24 3327-35 (2004).
DOI
|
5 |
Z.Tatli and D.P.Thompson, "Low Temperature Densification of Silicon Nitride Materials," J. Eur. Ceram. Soc., 27 791-5 (2007).
DOI
|
6 |
C.R. Zhou, Z.B.Yu, and V.D. Krstic, "Pressureless Sintered Self-reinforced Y--SiAlON Ceramics," J. Eur. Ceram. Soc., 27 437-43 (2007).
DOI
|
7 |
T. Nishimura, M. Mitomo, H. Hirotsuru, and M. Kawahara, "Fabrication of Silicon Nitride Nanoceramics by Spark Plasma Sintering," J. Mater. Sci. Lett., 14 1046-7 (1995).
DOI
|
8 |
Z. Shen and M. Nygren, "Kinetic Aspect of Superfast Consolidation of Silicon Nitride Based Ceramics by Spark Plasma Sintering," J. Mater. Chem., 11 201-7 (2001).
|
9 |
P.G. McCormick and F.H. Froes, "The Fundamentals of Mechanochemical Processing. Overview," JOM, November 61-5 (1998).
|
10 |
M. Senna "Development of Materials Design Through a Mechanochemical Route" in High-energy Ball Milling. Mechanochemical Processing of Nanopowders. M. Sopicka-Lizer (Ed) Woodhead Publishing Limited. 65-91 (2010).
|
11 |
Xu, X, T. Nishimura., N. Hirosaki., R-J. Xie, Y. Zhu., Y.Yamamoto, and H. Tanaka, "New Strategies for Preparing Nanosized Silicon Nitride Ceramics" J. Am. Ceram. Soc., 88 [4] 934-7 (2005).
DOI
|
12 |
T. Pawlik, M. Sopicka-Lizer, D. Michalik, and T. Wlodek, "Characterization of the Mechanochemically Processed Silicon Nitride-based Powders," Archives of Metallurgy and Mater., 56 [4] 1205-10 (2011).
DOI
|
13 |
X. Xu, T. Nishimura, N. Hirosaki, R-J Xie, Y. Yamamoto, and H. Tanaka, "Fabrication of B-sialon Nanoceramics by High-energy Mechanical Milling and Spark Plasma Sintering," Nanotechnology, 16 1569-73 (2005).
DOI
|
14 |
M. Sopicka-Lizer, T. Pawlik, T. W odek, M. Tancula, and G. Chernik, "The Effect of Sialon Precursor Nanostructurization in A Planetary Mill on the Properties of Sintered Ceramics," Key Eng. Mat., 352 179-84 (2007).
DOI
|
15 |
M. Sopicka-Lizer, M. Tancula, T. W odek, K. Rodak, M. Hüller, V. Kochnev, E. Fokina, and K.J.D. MacKenzie, "The Effect of Mechanical Activation on the Properties of -sialon Precursors," J. Eur. Ceram. Soc., 28 279-88 (2008).
DOI
|
16 |
G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marchal, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," J. Am. Ceram. Soc., 64 [9] 3-38 (1981).
|
17 |
L. Zhou, Y. Huang, Z. Xie, A. Zimmermann, and F. Aldinger, "Preparation of Ceramics with High Strength and High Reliability Via Processing Strategy," J. Eur. Ceram. Soc., 22 1347-55 (2002).
DOI
|
18 |
S. Hampshire and K.H. Jack, "The Kinetics of Densification and Phase Transformation in Nitrogen Ceramics," Pro. of British Ceram. Soc., 31 37-49 (1981).
|