• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.25-36
• /
• 2018

Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.72-80
• /
• 2014

This study is to estimate a demand of coffee in Korea. And based on assumed data, this study is to investigate price elasticity, income elasticity and cross-price elasticity of coffee demand. The data used in this study is the household income and expenditure survey micro data (2003~2012) provided by the National Statistical Office. And LA/AIDS model and SUR method were utilized in order to forecast coffee demand. As a result, price elasticity and income elasticity are found to be correspond with economic theory as they were assumed to -0.259, 0.455 respectively. Meanwhile, it indicated characteristic of essential good by showing negative (-) income odds ratio estimate. When it comes to cross-price elasticity of coffee and cigarette, it was found to be a complementary relation as its cross-price elasticity was assumed to -0.121. Besides, it was found that male consume more coffee than female, while people in their age of 50s consumes mostly. In conclusion, this study suggests necessity of reconsidering coffee as important goods when Consumer Price Stabilization Policy is determined, as coffee shows characteristic of essential goods which is inelastic.

• Journal of Korean Academy of Nursing
• /
• v.49 no.1
• /
• pp.69-79
• /
• 2019

Purpose: This study aimed to identify the directionality of the causal relationship and interaction between depression and amount of smoking over time in hardcore smokers using longitudinal descriptive analysis. Methods: Secondary data from the Korean Welfare Panel Study were analyzed using autoregressive cross-lagged modeling. Participants included 342 hardcore smokers who participated in the 8th to 11th waves of the panel study. Results: Analyses revealed that change(s) in depression levels according to time had a significant positive relationship with the total amount of smoking per day (${\beta}=.29$, ${\beta}=.19$, ${\beta}=.17$, p<.001), while change(s) in total amount of smoking per day according to time had a significant positive relationship with depression (${\beta}=.43$, ${\beta}=.50$, ${\beta}=.38$, p<.001). Analysis of the cross-lagged effect between depression and total amount of smoking per day showed that depression at one time point had a significantly positive relationship with the total amount of smoking per day at the next time point (${\beta}=.14$, ${\beta}=.13$, ${\beta}=.13$, p=.021), and that the total amount of smoking per day at one time point had a significant positive relationship with depression at the next time point (${\beta}=.04$, ${\beta}=.04$, ${\beta}=.03$, p=.044). Conclusion: The findings in the present study confirmed a cross-interaction between depression and total amount of smoking per day in hardcore smokers. The present findings could be used to develop appropriate smoking-related interventions.

• Clinical and Experimental Pediatrics
• /
• v.58 no.12
• /
• pp.466-471
• /
• 2015

Purpose: This study attempted to examine parental satisfaction with pediatric emergency care (PEC) in Korea and investigate the features influencing overall satisfaction. Methods: A nationwide, cross-sectional survey was conducted among parents who had taken their children to an Emergency Department (ED) in the three years prior to the study. A 21-item, structured questionnaire was administered to the parents through a web-based system. Participants' satisfaction levels and the strength of the association between PEC components and overall satisfaction were rated using a 7-point Likert scale. Results: In total, 1,000 parents participated in the survey, of which 402 (40.2%) stated that they were generally satisfied with the delivered PEC. Female participants, mothers, and parents with low-acuity patients were more likely to be dissatisfied with the delivered PEC. Although the ED environment was the lowest level of satisfaction, it did not significantly influence the respondents' overall levels of satisfaction. The most influential factors in terms of overall satisfaction were "nurses' professionalism" and "doctors' attitude and proper explanation". Conclusion: Parents' overall level of satisfaction with PEC is relatively low and is closely related to factors associated with ED personnel.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.165-180
• /
• 2005

Impact seismic wave test is a method for nondestructive testing of concrete structure using of stress wave which is propagated and reflected from internal flaws within concrete structure and external surface, In this study, we performed non-destructive testing using impact seismic wave test for safety diagnosis of civil engineering structures. For this, I've compared and analized the result in the way of reflective method mostly using on one-dimension such as tunnel lining, and penetration method using the way of cross hole and tomography.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.704-715
• /
• 2005

In this study, to investigate in-cylinder tumble or swirl intake flow of a gasoline engine, the flow characteristics were examined with opening control valve (OCV) and several swirl control valves (SCV) which intensify intake flow through steady flow experiment, and also turbulent characteristics of in-cylinder flow field were investigated by 2-frame cross-correlation particle image velocimetry (PIV) method. In the investigation of intake turbulent characteristics using PIV method, the different flow characteristics were showed according to OCV or SCV figures. The OCV or SCV installed engine had higher vorticity and turbulent kinetic energy than a baseline engine, especially around the wall and lower part of the cylinder. Above all, SCV B type was superior to the others. About energy dissipation and reynolds shear stress distribution, a baseline engine had larger loss than OCV or SCV installed one because flow impinged on the cylinder wall. It should be concluded, from what has been said above, as swirl component was added to existing tumble flow adequately, it was confirmed that turbulent intensity was enlarged, flow energy was conserved effectively through the experiment. In other words, there is a suggestion that flow characteristics as these affected to in-cylinder combustion positively.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.266-274
• /
• 2014

Parametric bodies reproduce the actual shape of human body parts and should be convenient for general users to change size to judge the visual fit of clothes on-line. In this study, three parametric bodies(i.e. I, C, D ) were compared to verify the accuracy of the provided body dimensions and reproducibility to a target model. To compare reproducibility, the 20s female standard virtual model developed for an apparel industry by Korean agency for technology and standards is used. The investigation of existing parameters showed that the numbers and kinds of parameters provided by each program were different with some errors in notation; in addition, some of virtual body dimensions went beyond the maximum allowable error. The result of changing each parametric body to the 20s female standard body showed that D, C, I in order produced better reproducibility for body dimensions. There were different levels of protrusion and concavity in the virtual cross sections and virtual longitudinal sections despite the small differences in body dimensions and cross sectional areas; in addition, some parametric body was not bilateral symmetry. The results of this study can be used as basic information in the standardization of a virtual model used in a virtual garment program.

• Elastomers and Composites
• /
• v.38 no.2
• /
• pp.128-138
• /
• 2003

It goes to be serious with environmental pollution because of great number of waste tires scrapped each you. That is why there are lots of studies for efficient recycle. We tried to reduce particle size of the waste tire powder using a new technology of self-designed grinding machine (SDGM) and ultrasonic treatment. The purpose of this study is to improve the physical properties of reduced waste tire powder. We investigated the fine powder by particle size distribution(PSD) analysis. And also we examined the physical and mechanical properties and cross-link density at various particle sire. Also we carried out morphological studies after making the products by SEM.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.265-265
• /
• 2022

Increased temperature caused by global warming has become a significant problem for the growth and production of crops. A high temperature has a direct or an indirect effect on crops, leading to a significant yield loss. The damage of a high temperature stress to rice depends on its developmental stage. In present study, we performed evaluate the heading date in different location, Yeoju and Miryang, during growth of Korean rice core set. The heading date for the 223 rice accession were evaluated in Yeoju City (37°23' 127°57') and Miryang City (35°50', 128°72') located on middle and southern part of Korea, respectively. The average temperature of a day was higher in Miryang during entire growth stage. Here, total 222 KRICE-Core set was analyzed by GWAS for the high temperature effect. GWAS results revealed the Chr07_26954556, a lead SNPs were significantly associated with delaying heading date of KRICE-Core set. Significance threshold was set with 6.0 > -log10(P), and Cross-Validation (CV) error suggested an optimal K value of 5 for the population based on the lowest cross-validation error K = 5.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.95-105
• /
• 2020

The Hong Kong issue covered in the study refers to the problems caused by the various measures and policies taken by the Chinese government since Hong Kong's return to China on July 1, 1997, and the resistance and resistance shown by the Hong Kong people. Since Hong Kong's return The Chinese government carried out a policy of strengthening direct control over Hong Kong, and on June 30, 2020, the Standing Committee of the National People's Congress of China passed the Hong Kong National Security Act. This study will focus on the impact of the Hong Kong issue on Cross-Strait Relations. Through this, we will take a look at the application of the "one-country, two-system" policy, Taiwan and China's Unification Issues and the democratization of Hong Kong. This study predicts that after the passage of the "Hong kong National security law," the principle of "one-country, two-system" that China tried to apply to unification with Taiwan will be put into a big test, and that Cross-Strait Relations and U.S.-China relations will deteriorate. Tension will quickly arise around Northeast Asia in the future, and we should also analyze and prepare for it in various ways.