• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1871-1885
• /
• 2019

The deterministic MOC code STREAM of the Computational Reactor Physics and Experiment (CORE) laboratory of Ulsan National Institute of Science and Technology (UNIST), was initially designed for the calculation of pressurized water reactor two- and three-dimensional assemblies and cores. Since fast reactors play an important role in the generation-IV concept, it was decided that the code should be upgraded for the analysis of fast neutron spectrum reactors. This paper presents a coupled code - TULIP/STREAM, developed for the fast reactor assembly and core calculations. The TULIP code produces self-shielded multi-group cross-sections using a one-dimensional cylindrical model. The generated cross-section library is used in the STREAM code which solves eigenvalue problems for a two-dimensional assembly and a multi-assembly whole reactor core. Multiplication factors and steady-state power distributions were compared with the reference solutions obtained by the continuous energy Monte-Carlo code MCS. With the developed code, a sensitivity study of the number of energy groups, the order of anisotropic P_N scattering, and the multi-group cross-section generation model was performed on the k_eff and power distribution. The 2D core simulation calculations show that the TULIP/STREAM code gives a k_eff error smaller than 200 pcm and the root mean square errors of the pin-wise power distributions within 2%.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.187-194
• /
• 2006

Recently satellite SAR techniques have become essential observation tools for various ocean phenomena such as wind, wave, and current. The CMOD4 and CMOD-IFR2 models are used to calculate the magnitude of wind at SAR resolution with no directional information. Combination of the wave-SAR spectrum analysis and the inter-look cross-spectra techniques provides amplitude and direction of the ocean wave over a square-km sized imagette, The Doppler shift measurement of SAR image yields surface speed of the ocean current along the rador looking direction, again at imagette resolution. In this paper we report the development of a SAR Ocean processor (SOP) incorporating all of these techniques. We have applied the SOP to several RADARSAT-1 images of the coast of Korean peninsula and compared the results with oceanographic data, which showed reliability of spaceborne SAR-based oceanographic research.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.35-42
• /
• 2007

Recently satellite SAR techniques have become essential observation tools for various ocean phenomena such as wind, wave, and current. The CMOD4 and CMOD-IFR2 models are used to calculate the magnitude of wind at SAR resolution with no directional information. Combination of the wave-SAR spectrum analysis and the inter-look cross-spectra techniques provides amplitude and direction of the ocean wave over a square-km sized imagette, The Doppler shift measurement of SAR image yields surface speed of the ocean current along the radar looking direction, again at imagette resolution. In this paper we report the development of a SAR Ocean processor(SOP) incorporating all of these techniques. We have applied the SOP to several RADARSAT-1 images of the coast of Korean peninsula and compared the results with oceanographic data, which showed reliability of spaceborne SAR-based oceanographic research.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.423-429
• /
• 2021

The investigation of the utilization of enriched ²⁰⁸Pb as a coolant to enhance the performance of a long-life fast reactor with a Modified CANDLE (Constant Axial shape of Neutron flux, nuclide densities, and power shape During Life of Energy production) burnup scheme has performed. The analyzes were performed on a reactor with thermal power of 800 MegaWatt Thermal (MWTh) with a refueling process every 15 years. Uranium Nitride (enriched ¹⁵N), ²⁰⁸Pb, and High-Cr martensitic steel HT-9 were employed as fuel, coolant, and cladding materials, respectively. One of the Pb-nat isotopes, ²⁰⁸Pb, has the smallest neutron capture cross-section (0.23 mb) among other liquid metal coolants. Furthermore, the neutron-producing cross-section (n, 2n) of ²⁰⁸Pb is larger than sodium (Na). On the other hand, the inelastic scattering energy threshold of ²⁰⁸Pb is the highest among Na, ^natPb, and Bi. The small inelastic scattering cross-section of ²⁰⁸Pb can harden the neutron energy spectrum. Therefore, ²⁰⁸Pb is a better neutron multiplier than any other liquid metal coolant. The excess neutrons cause more production than consumption of ²³⁹Pu. Hence, it can reduce the initial fuel loading of the reactor. The selective photoreaction process was developing to obtain enriched ²⁰⁸Pb. The neutronic was calculated using SRAC and JENDL 4.0 as a nuclear data library. We obtained that the modified CANDLE reactor with enriched ²⁰⁸Pb as coolant and reflector has the highest k-eff among all reactors. Meanwhile, the ^natPb cooled reactor has the lowest k-eff. Thus, the utilization of the enriched ²⁰⁸Pb as the coolant can reduce reactor initial fuel loading. Moreover, the enriched ²⁰⁸Pb-cooled reactor has the smallest power peaking factor among all reactors. Therefore, the enriched ²⁰⁸Pb can enhance the performance of a long-life Modified CANDLE fast reactor.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.281-294
• /
• 2015

In order to quantitatively estimate the nonlinear destructive interaction of wave load with wind load, which is very vital for the optimal design of offshore wind energy converter, we carried out a hydraulic model test and wind tunnel test. As a substructure of offshore wind energy converter, we would deploy the monopile, which is popular due to its easiness in construction. Based on the simulation using Monte Carlo simulation using Kaimal spectrum and cross spectrum, the instantaneous maximum wind velocity is adjusted to 10 m/s. And, considering the wave conditions of the Western Sea where a pilot wind farm is planned to be constructed, $H_s=0.1m$, 0.15 m, 0.2 m is carefully chosen. It turns out that the nonlinear destructive interaction between the wind and wave loads acting on the offshore wind energy converter is more clearly visible at rough seas rather than at mild seas, which strongly support our deduction that a Large eddy, a swirling vortex developed near the bumpy water surface in the opposite direction of the wind, is the driving mechanism underlying nonlinear destructive interaction between the wind and wave loads.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.103-110
• /
• 2012

In this paper, a target signal detection method using multiple signal classification (MUSIC) algorithm is proposed. The MUSIC algorithm is a subspace-based direction of arrival (DOA) estimation method. Using the inverse of the eigenvalue-weighted eigen spectra, the algorithm detects the DOAs of multiple sources. To apply the algorithm in target signal detection for GSC-based beamforming, we utilize its spectral response for the DOA of the target source in noisy conditions. The performance of the proposed target signal detection method is compared with those of the normalized cross-correlation (NCC), the fixed beamforming, and the power ratio method. Experimental results show that the proposed algorithm significantly outperforms the conventional ones in receiver operating characteristics (ROC) curves.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.6
• /
• pp.353-360
• /
• 2014

In cognitive radio networks (CRNs), SU (secondary user)'s transmissions are frequently disrupted by PU (primary user)'s transmission. Therefore SU expereiences consecutive retransmission timeout and its exponential backoff, and subsequently, the TCP of SU does not proceed with the transmission even after the disruption is over or the SU succeeds to hold an idle channel. In order to solve this problem, we propose a cross-layer approach called TCP-Freeze-CR. Moreover we consider a practical scenario where either secondary transmitter (ST) or secondary receiver (SR) detects PU's transmission, which results in the need of spectrum synchronization mechanism. All of our proposals are implemented and verified with a real CRN testbed consisting of 6 software radios called USRP. The experimental results illustrate that standard TCP suffers from significant performance degradation and show that TCP-Freeze-CR greatly mitigates the degradation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.558-567
• /
• 1986

본 논문에서는 출력만의 측정에 의해 실험적 모우드 해석을 하기 위한 구체적 인 절차를 제시하고 선반의 오무드 해석에 적용하였다. 먼저 이 방법의 타당성을 조 사하기 위해 가진기로 가진력을 가하면서 입출력을 모두 기록한 후 출력만에 의한 해 석결과와 입출력을 모두 이용하는 주파수 응답함수법에 의한 결과들을 비교하였으며, 엄밀한 의미에서 가진력을 측정하기 하기 어려운 상황인 실제선삭작업중에 출력인 가 속도 신호만을 측정하여 본 방법을 적용하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.9
• /
• pp.834-841
• /
• 2011

Obtaining the real exciting force is important for the analysis of structural vibration or sound radiation to represent the actual condition. But in most cases, it is so difficult to get the actual force signals by direct measurement using sensors due to complex geometry. This paper suggests advanced source identification method which can be applied to the prediction of radiated noise considering correlations between measured signals. This method was implemented to the identification of the fan force in the refrigerator. The analysis of structural vibration and radiated noise caused by the fan force was also performed. The comparison between predicted SPL and measured SPL of the radiated noise by the refrigerator fan showed good agreement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.389-396
• /
• 1999

In this paper, we propose a multiple underwater object classification and tracking algorithm using the narrowband tonal and frequency line features extracted from the frequency spectrum of the acoustic signal. The general algorithm using the wideband and narrowband energy has a high tracking error when objects are close and cross each other. But the proposed algorithm shows a good tracking performance for the simulation scenarios generated by the real acoustic data.