• 한국지리정보학회지
• /
• 제6권1호
• /
• pp.132-142
• /
• 2003

하천 홍수터 분석을 위해 사용되는 대부분의 컴퓨터 모형에 있어서의 중대한 결점은 홍수에 영향을 받는 도로, 건물 및 교량과 같은 구조물의 위치가 홍수터의 위치와 효과적으로 비교될 수 없다는 것이다. 본 연구에서는 홍수터 결정과 묘사를 위한 지역적 모형을 개발하기 위해 ArcView GIS와 HEC-RAS 모형을 통합하고, ArcView 상에서 2차원 및 3차원 홍수터 구현 및 분석이 가능하도록 하는데 그 목적이 있다. 연구대상 유역은 남한강 유역에 위치하는 경기도 여주 지역으로서, 대상 유역의 수치지형모형(digital terrain model)은 HEC-RAS 132-142단면 자료와 수치표고모형(digital elevation model)를 합성하여 제작하였다. 연구방법으로 Arcview에서 제작된 홍수터 자료는 HEC-RAS 운영에 있어 정확한 수로 및 제방 자료를 반영하도록 전체 홍수터 단면도를 작성하기 위해 수로 현장측량 자료와 결합하였다. HEC-RAS에서 계산된 수위 자료는 홍수터 경계(flood plain limits)가 ArcView에서 정확하게 표현되도록 하였다. 본 연구는 하천 수로의 일반 지형 및 세부 사항들의 효과적 표현 방법을 제시하였으며, 전체적으로 HEC-RAS와 연계한 지리정보시스템(GIS)이 홍수 재해지도의 자동생성 및 홍수터 분석에 있어 매우 유용하며, 효과적인 환경이라는 것을 입증하였다.

• 복식문화연구
• /
• 제8권5호
• /
• pp.668-680
• /
• 2000

The study presents the general types and individual differences of the shape of the adult women's neck and shoulder in our country. It is based on the average value, the standard deviation, the maximum value, the standard deviation, the maximum value, the minimum value and c.v. measured from the women at the age of 19 through 64. The results of this study are as follows ; 1. The factors by factor analysis are five. The first is the size factors of the neck and shoulder. The second is shape factor of neck. The third is plane view and length factor of the neck. The fourth is the side view factor of the neck and shoulder. The fifth is the shape factor of shoulder. Therefore the shape of the neck and shoulder should be examined in the shape factors as well as in the size factors as well as in the size factors for the designing body-suitable clothes. 2. The factors of the concrete objects are the solid view of neck and shoulder, the cross-sectional view of neck line, side view of neck and shoulder and length of neck. The explainable measuring items for the factors are the difference of the length between lower neck round line and the 4㎝ above neck round line, the length of neck, the angle of inclination between fore neck and back neck, the angle of inclination of the side shoulder, the difference of the height between fore neck point and back neck point, the width of shoulder, the width of chest and the width of back. 3. The concrete objects of the neck and shoulder have five types ; Type Ⅰ is average type, Type Ⅱ is thick short neck and the drooping shoulder type, Type Ⅲ I is slender long neck and lean-back shoulder type, Type Ⅳ is thick and rising shoulder type and Type Ⅴ is slender and drooping shoulder type.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.172-172
• /
• 2009

In this study, we presented comparative discrimination methods to identify various line and planar defects observed in nonpolar a-GaN epilayers on r-sapphire substrates. Unlike the case of conventional c-GaN, which is dominated by perfect threading dislocations, systematic identification of undistinguishable defects using transmission electron microscopy (TEM) is necessary to suppress the propagation of defects in nonpolar GaN epilayers. Cross-sectional TEM images near the [0001] zone axis revealed that perfect mixed and pure screw type dislocations are visible, while pure edge, partial dislocations, and basal stacking faults (BSFs) are not discernible. In tilted cross-sectional TEM images along the [$1\bar{2}10$] zone axis, the dominant defects were BSFs and partial dislocations for the $g=10\bar{1}0$ and 0002 two-beam images, respectively. From plan view TEM images taken along the [$11\bar{2}0$] axis, it was found that the dominantpartial and perfect dislocations were Frank-Shockley with b=${\pm}1/6$<$20\bar{2}3$> and mixed type without an 1 component including b=${\pm}1/3$<$1\bar{2}10$> and ${\pm}1/3$<$\bar{2}110$>, respectively. Prismatic stacking faults were observed as inclined line contrast near the [0001] zone axis and were visible as band contrast in the two-beam images along the [$1\bar{2}10$] and [$11\bar{2}0$] zone axes.

• 소성∙가공
• /
• 제14권5호
• /
• pp.432-438
• /
• 2005

Among the most of manufacturing process, plastic deformation method offers a significant advantage in productivity and enable mass production with controlled quality and low cost. From the point of view, micro forming is a well suited technology in manufacturing very small metallic parts, in particular for mass production, as they are required in many industrial products. Meanwhile, Al 5083 superplastic alloy with very small grains has a great advantage in achieving micro deformation under low stress due to its relatively low strength at a specific high temperature range. This paper describes the micro formability of Al 5083 superplastic alloy and its application to die forging of micro patterns. Micro formability tests of Al 5083 superplastic alloy were carried out with the specially designed micro forging system by using V-grooved micro dies and pyramidal dies made of (100) silicon. With these dies, micro forging was conducted by varying the applied load, material temperature and forging time The micro formability of Al 5083 superplastic alloy was evaluated by comparing $R_f$ value, where $R_f\;=\;A_f/A_v$ ($A_v$ : cross-sectional area of the flowed metal, $A_v$ : cross sectional area of V-groove). The micro formability of 3 dimensional Patterns was also evaluated using Pyramidal type micro dies.

• Journal of Preventive Medicine and Public Health
• /
• 제31권4호
• /
• pp.770-785
• /
• 1998

This study describes the relation of physician's income and price of medical service and social welfare through microeconomic view, reviews the literature of influencing factor on physician's income, and it describes general distribution of physician's income, and analyzes influencing factor of physician's income. A total of 844 persons responded to the mail survey, through stratified sampling by 23 branches of medical society in Korean RBRVS study. The design of the study is cross sectional study, and the unit of analysis is a physician. To examine the change of average income per month, multiple regression was used to test the change according to physician's characteristics, demographic characteristics, scale of clinic, average intensity of ordinary work, and specialty. The major findings of this study are as follows; 1. As for self-employed physicians, the difference of average income per month among specialties was mcreased \4,850,000, but the difference was \6,020,000 under the control of control variables. 2. The number of average out-patients per month and number of nurses and nursing aides significantly positively associated, and average income per month was significantly higher for physicians who had sick-beds than physicians who had no sick-beds. In conclusion, the number of out-patient and number of nurses and nursing aides is the major influencing factor, and the difference of average income per month among specialties existed in self-employed physicians. So this study suggests basic hypothesis that the price of medical service and supply of physician by specialties are not pertinent. Being a cross-sectional study, this study can not suggest causal explanations. In the future, further study is needed for causal explanations.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권11호
• /
• pp.5005-5009
• /
• 2016

Introduction: Gutkha contains harmful and carcinogenic chemicals and oral cancer caused by tobacco usage has been reported as a major preventable cause of death worldwide by the World Health Organization. The Telangana state government implemented a ban on gutkha usage starting in 2013 but how effective this ban has been remains unclear. Objectives: The objective of this study was to determine the actual impact of the gutkha ban on users and vendors. Methodology: A cross-sectional study was conducted among gutkha users and tobacco vendors in Ranga Reddy district, Telangana. Based on a pilot study the sample size was determined as 368 and 384 for users and vendors respectively. Two separate questionnaires were administered to these groups. The parameters studied mainly included knowledge regarding the ban, and its impact. Results: About 49.1% of the users were aware of the ban on gutkha. Newspapers were the main source of information regarding the ban as reported by 45.3% of users. After the ban, 29.8% of gutkha users switched to other tobacco products. Awareness of health hazards and non-availability of gutkha was the most important reason stated for quitting or reducing consumption. Conclusion: The perspective of ban when visualized from the users point of view depicted a negative impact while the vendors portrayed a positive impact. Considering the addictive potential of the ingredients of gutkha, recording the effects of the ban on regular consumers and determining whether they can still obtain the products by illicit trade, would be noteworthy for implementation of strict rules.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.393-399
• /
• 2018

Formation behavior of aluminum anodic oxide (AAO) films on Al6061 alloy was studied in view of thickness, morphology and defects in the anodic films in 20 vol.% sulfuric acid solution at a constant current density of $40mA/cm^2$, using voltage-time curve, observation of anodized specimen colors and surface and cross-sectional morphologies of anodic films with anodization time. With increasing anodizing time, voltage for film formation increased exponentially after about 12 min and its increasing rate decreased after 25 min, followed by a rapid decrease of the voltage after about 28 min. Surface color of anodized specimen became darker with increasing anodizing time up to about 20 min, while it appeared to be brighter with increasing anodizing time after 20 min. The darkened and brightened surfaces with anodizing time are attributed to an increase in thickness of porous anodic oxide film and a chemical damage of the films due to heat generated by increased resistance of the film, respectively. Cross-sectional observation of AAO films revealed the formation of defects of crack shape at the metal/oxide interface after 15 min which prevents the growth of AAO films. Width and length of the crack-like defect increased with anodizing time up to 25 min of anodizing, and finally the outer part of AAO films was partly dissolved or detached after 30 min of anodizing, resulting in non-uniform surface structures of the AAO films.

• 인문언어
• /
• 제7집
• /
• pp.57-92
• /
• 2005

The main driving force behind Chomskyan theory of language that is gaining ground under the title of the "minimalist program" has been the urge to reduce the variety of natural languages to a minimal number of theoretical concepts and devices and to formulate the strongest possible hypothesis about linguistic structures. This has led to a long series of proposals of ever greater abstractness, with concomitant modifications in a number of theoretical constructs. The minimalist approach is the latest development of these constant changes, for which there is really "only one computational system and one lexicon," the differences among languages being reducible to parametric variation in "nonsubstantive parts of the lexicon"(Chomaky 1995:169-70). Chomsky thus differs, now more than ever, from other linguists by his sweepingly programmatic, rather than empirical, approach to language. The proposals he makes are too complicated to discuss here in any technical details. We rather focus on a series of lectures delivered by an ardent adherent of the minimalist program, with the view to demonstrating how this theory may mislead and distort the whole prospect of linguistic investigation. The rationale of the so-called 'minimalism' per se will be called into question.

• 대한의용생체공학회:의공학회지
• /
• 제34권3호
• /
• pp.135-140
• /
• 2013

We have developed an ultra wide-field of view Optical Coherence Tomography(OCT) which has capability to 2D and 3D views of cross-sectional structure of in vivo human retina. Conventional OCT has a limitation in visualizing the entire retina due to a reduced field of view. We designed an optical setup to significantly improve the lateral scanning range to be more than 20 mm. The entire human retinal structure in 2D and 3D was reported in this paper with the developed OCT system. Also, we empirically searched an optimized image size for real time visualization by analyzing variation of the frame rate with different lateral scan points. The size was concluded to be $1024{\times}2000{\times}300$ pixels which took 9 seconds for visualization.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.372-379
• /
• 2006

The surface topography, tensile properties, and thermal properties of ramie fibers were investigated as reinforcement for fully biodegradable and environmental-friendly 'green' composites. SEM micrographs of a longitudinal and cross sectional view of a single ramie fiber showed a fibrillar structure and rough surface with irregular cross-section, which is considered to provide good interfacial adhesion with polymer resin in composites. An average tensile strength, Young's modulus, and fracture strain of ramie fibers were measured to be 627 MPa, 31.8 GPa, and 2.7 %, respectively. The specific tensile properties of the ramie fiber calculated per unit density were found to be comparable to those of E-glass fibers. Ramie fibers exhibited good thermal stability after aging up to $160^{\circ}C$ with no decrease in tensile strength or Young's modulus. However, at temperatures higher than $160^{\circ}C$ the tensile strength decreased significantly and its fracture behavior was also affected. The moisture content of the ramie fiber was 9.9 %. These properties make ramie fibers suitable as reinforcement for 'green' composites. Also, the green composites can be fabricated at temperatures up to $160^{\circ}C$ without reducing the fiber properties.