• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.29-34
• /
• 1994

A leading sweet pepper cultivar, Keystone Resistant Giant #3, was crossed with a line with resistance to Phytophthora capsici, PI201232, for incorporation of the resistance and to study the inheritance of resistance to the disease. Seedlings of parents, $F_1$, $F_2$ and backcross populations of a cross between Keystone Resistant Giant #3 and PI201232 were inoculated with zoospore suspension of P. capsici at 36 days after seeding. Most of the $F_1$ seedlings survied the inoculation and this suggested that resistance is dominant over susceptibility. The number of survived plants in $F_2$ population was, however, much less than the killed. All the plants in a backcross to Keystone Resistant Giant #3 were killed. Therefore, the observed numbers did not fit the expected ratio for segregation of one or two dominant alleles as previously reported. The resistance to P. capsici appeared to be inherited in a quantitative mode in evaluation of root rot. Resistant individuals in $F_2$ population were selected and a breeding program for incorporation of the resistance to P. capsici by backcross method is continued.

• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.23-28
• /
• 1994

A leading sweet pepper cultivar, Keystone Resistant Giant #3, was crossed with a line with resistance to Xanthomonas campestris pv. vesicatoria, PI271322, for incorporation of the resistance and to study the inheritance of resistance to the disease. Seedlings of parents, $F_1$, $F_2$ and backcross populations of a cross between Keystone Resistant Giant #3 and PI271322 were inoculated with race 1 and race 3 of Xanthamonas campestris pv. vesicatoria by infiltrating bacterial suspension into abaxial side of leaves. PI271322 was carrying a gene ($Bs_3$) for hypersensitive resistance to race 1 of X. c. pv. vesicatoria and also a component of non-hypersensitive resistance to race 3 inheriting in a quantitative mode. Correlation coefficient between disease indices to race 1 and race 3 of non-hypersensitive plants in $F_2$ population was highly significant, thus indicating that a component of non-hypersensitive general resistance in PI271322 acted consistently to both races. Individual plants with resistance to both race 1 and race 3 of X. c. pv. vesicatoria were selected and a breeding program for incorporation of the resistance is continued.

• Nutrition Research and Practice
• /
• v.12 no.4
• /
• pp.324-335
• /
• 2018

BACKGROUND/OBJECTIVES: We examined dietary fat intake and the major food sources by young children in Korea. SUBJECTS/METHODS: A total of 1,041 children aged 1-5 years were identified from the 2013-2015 Korea National Health and Nutrition Examination Survey. Data on total fat and fatty acid intake were obtained by a single 24-h dietary recall. Food sources were identified based on the amounts of total fat and fatty acids consumption according to each food. Fat and fatty acid intakes and their food sources were presented by age group (1-2-y, n = 401; 3-5-y, n = 640). Fat and fatty acid intakes were also evaluated according to socioeconomic characteristics. RESULTS: The mean intake of fat was $27.1{\pm}0.8g$ in the 1-2-y group and $35.5{\pm}0.7g$ in the 3-5-y group, and about 23% of the total energy was obtained from fat in both age groups. The mean intake of saturated fatty acids (SFA) was $10.5{\pm}0.3g$ in the 1-2-y group and $12.7{\pm}0.3g$ in the 3-5-y group, with the 1-2-y group obtaining more energy from SFA than the 3-5-y group (9.2% vs. 8.3%). The mean intake of polyunsaturated fatty acids (PUFA) was $6.3{\pm}0.1g$ in the total subjects, with $0.8{\pm}0.03g$ of n-3 fatty acids and $5.5{\pm}0.1g$ of n-6 fatty acids being consumed. Milk, pork, and eggs were major food sources of total fat, SFA, and monounsaturated fatty acids, and soybean oil was the main contributor to PUFA in both age groups. In the 1-2-y group, children in rural areas had significantly higher intake of PUFA and n-3 fatty acids than did those in urban areas. CONCLUSIONS: Our findings provide current information on dietary fat intake among young Korean children and could be used to establish dietary strategies for improvement of health status.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.199-204
• /
• 2012

Organic thin-film transistors (OTFTs) have received considerable attention because their potential applications for nano-scale thin-film structures have been widely researched for large-scale integration industries, such as semiconductors and displays. However, research in developing n-type materials and devices has been relatively shortage than developing p-type materials. Therefore, we report on the fabrication of top-contact [6,6]-phenyl-C61-butyricacidmethylester (PCBM) TFTs by using three different solvent, o-dichlorobenzene, toluene and chloroform. An appropriate choice of solvent shows that the electrical characteristics of PCBM TFTs can be improved. Moreover, our PCBM TFTs with the cross-linked Poly(4-vinylphenol) dielectric layer exhibits the most pronounced improvements in terms of the field-effect mobility (${\sim}0.034cm^2/Vs$) and the on/off current ratio (${\sim}1.3{\times}10^5$) for our results. From these results, it can be concluded that solvent-modification of an organic semiconductor in PCBM TFTs is useful and can be extended to further investigations on the PCBM TFTs having polymeric gate dielectrics. It is expected that process optimizations using solution-processing of organic semiconductor materials will allow the development of the n-type organic TFTs for low-cost electronics and various electronic applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.387-394
• /
• 2016

A stereo matching method is one of the ways to obtain a depth value from two dimensional images. This method estimates the depth value of target images using stereo images which have two different viewpoints. In the result of stereo matching, the depth value is represented by a disparity value. The disparity means a distance difference between a current pixel in one side of stereo images and its corresponding point in the other side of stereo images. The stereo matching in a homogeneous region is always difficult to find corresponding points because there are no textures in that region. In this paper, we propose a novel matching equation using the distance transform to estimate accurate disparity values in the homogeneous region. The distance transform calculates pixel distances from the edge region. For this reason, pixels in the homogeneous region have specific values when we apply this transform to pixels in that region. Therefore, the stereo matching method using the distance transform improves the matching accuracy in the homogeneous regions. In addition, we also propose an adaptive matching cost computation using a kernel of one dimensional array depending on the characteristic of regions in the image. In order to aggregate the matching cost, we apply a cross-scale cost aggregation method to our proposed method. As a result, the proposed method has a lower average error rate than that of the conventional method in all regions.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2017

This paper proposes nominal flexural strength considering strain-hardening effect of HSB600 high performance steel for compact composite I-girders in positive bending. Unlike conventional steels, HSB600 undergoes strain-hardening just after yielding without going through yield plateau. However, because the nominal flexural strength specified in domestic and foreign bridge design specifications has been developed for the conventional steel composite girders, the nominal flexural strength does not appropriately consider the strain-hardening of HSB600. Therefore, plastic moment considering a strain-hardening is proposed so as to consider effect of the strain-hardening of HSB600 on flexural strength and then moment-curvature analysis is performed to a wide range of cross-sections. From results of the analysis, a parameter representing the effect of the strain-hardening on the flexural strength of HSB600 composite girders is proposed. Furthermore, by using this parameter, the nominal flexural strength considering the strain-hardening effect for HSB600 composite I-girders in positive bending is proposed and then evaluated by comparing with the current AASHTO LRFD bridge design specifications.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.105-112
• /
• 2002

We studied the optical and structural properties of conventional and ion-beam-assisted-deposition (IBAD) Nb$_2$O$_{5}$ films which were evaporated by an electron beam gun. The vacuum-to-air spectral shift and the cross sectional SEM images of the Nb$_2$O$_{5}$ films were investigated. The results show that the IBAD Nb$_2$O$_{5}$ films have a higher packing density than the conventional Nb$_2$O$_{5}$ films. The average refractive index of IBAD Nb$_2$O$_{5}$ films was increased, while the extinction coefficient was decreased compared with the conventional films. As the oxygen flow was increased, the average refractive index and extinction coefficient of the conventional and IBAD films decreased. Both the conventional and IBAD Nb$_2$O$_{5}$ films showed inhomogeneity in refractive index, and the degree of inhomogeneity of the IBAD Nb$_2$O$_{5}$ films became larger as the ion current density was increased. All Nb$_2$O$_{5}$ films were found to be amorphous by x-ray diffraction (XRD) analysis, and hence the crystal structure of Nb$_2$O$_{5}$ films was not changed by IBAD.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.162-179
• /
• 2007

Macheon Layered Intrusion (MLI) which intruded into Precambrian gneiss complex of the northern Jirisan area, southeastern part of Youngnam (or Sobaeksan) Massif, is a layered mafic-ultramafic complex of Triassic age (ca. 223 Ma). The MLI is divided into Layered Series and Laminated Series. Layered Series is subdivided into Central Zone (Lower Zone) consisting of olivine gabbros and Peripheral Zone (Middle or Upper Zone) consisting of hornblende gabbros based on the type of cumulus texture and the main mafic phase. The Central Zone of Layered Series comprises thinly laminated olivine gabbros and uniform or thickly laminated coarse olivine gabbros which consist of mela-gabbro, troctolite, leuco-troctolite, and anorthositic rocks. Laminated Series is also subdivided into quartz-bearing biotite-pyroxene gabbros and homblende diorite and both have variable amount of interstitial quartz and microcline. Laminated series display moderately to slightly developed igneous lamination which is defined by the planar alignment of lath-shape plagioclases. Chilled margin of quartz-bearing biotite-pyroxene gabbro with surrounding Precambrian gneisses insists shallower intrusion of more felsic cognate magma evolved in the deep a little later. Rocks of Layered Series have orthocumulus to adcumulus olivine, adcumulus to intercumulus plagioclase, and intercumulus to heteradcumulus pyroxene and hornblende. Magmatic modally grading, folding, and cross-lamination are not rarely occurred in thinly layered rocks. These textural characteristics define main mechanisms of the formation of layered and laminated structure in mafic-ultramafic rocks of Macheon Layered Intrusion are gravity settling and in-situ crystallization associated with slumping and density current.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.49-53
• /
• 2011

High-speed Cu filling into a through-silicon-via (TSV) and simplification of bumping process by electroplating for three dimensional stacking of Si dice were investigated. The TSV was prepared on a Si wafer by deep reactive ion etching, and $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to increase the filling rate of Cu into the via, a periodic-pulse-reverse wave current was applied to the Si chip during electroplating. In the bumping process, Sn-3.5Ag bumping was performed on the Cu plugs without lithography process. After electroplating, the cross sections of the vias and appearance of the bumps were observed by using a field emission scanning electron microscope. As a result, voids in the Cu-plugs were produced by via blocking around via opening and at the middle of the via when the vias were plated for 60 min at -9.66 $mA/cm^2$ and -7.71 $mA/cm^2$, respectively. The Cu plug with a void or a defect led to the production of imperfect Sn-Ag bump which was formed on the Cu-plug.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.669-680
• /
• 2013

Ozone sensitivity analysis with respect to $NO_x$ is conducted around the south-eastern area of the Korean Peninsula. WRF-CMAQ modeling system is used to simulate a local circulation and high ozone episode day. To analyze the sensitivity, the adjoint model for CMAQ is adopted in this study. The purpose of current study is to investigate the location that affects a day time ozone concentration of these receptors on the high ozone episode day. Adjoint sensitivity analysis for Daegu shows two areas of influence. One is the range from the neighboring location to Pohang and it affects mainly on the same day as receptor time. The other is the remote south-eastern area from Daegu. This remote influence area suggests that $NO_x$ emitted on the previous day can change the ozone concentration at receptor time. The influence area for Busan, on the other hand, is originated only from the emission on the previous day because the sea-breeze occurred on the episode day makes low influence of surrounding emission. The cross sectional analysis reveals that $NO_x$ advection is important not only near the surface of land but also around the height of boundary layer.