• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.933-940
• /
• 2024

A macroscopic cross section generation model was developed for the conceptual horizontal, compact high temperature gas reactor (HC-HTGR). Because there are many sources of spectral effects in the design and analysis of the core, conventional LWR methods have limitations for accurate simulation of the HC-HTGR using a neutron diffusion core neutronics simulator. Several super-cell model configurations were investigated to consider the spectral effect of neighboring cells. A new history variable was introduced for the existing library format to more accurately account for the history effect from neighboring nodes and reactivity control drums. The macroscopic cross section library was validated through comparison with cross sections generated using full core Monte Carlo models and single cell cross section for both 3D core steady-state problems and 2D and 3D depletion problems. Core calculations were then performed with the AGREE HTR neutronics and thermal-fluid core simulator using super-cell cross sections. With the new history variable, the super-cell cross sections were in good agreement with the full core cross sections even for problems with significant spectrum change during fuel shuffling and depletion.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.101-104
• /
• 1990

The program which could determine cross-sectional dimensions of the box girder bridge at tile stage of preliminary design was developed using the optimal technique in this study. It could minimize the cost and time required in the design of box girder bridges and the construction with the prestressed precast segmental method. Objective cost function consisted of four independent variables such as widths and depth of the cross-section. The Nelder-Mead method was used to solve the nonconstrained nonlinear problem like this.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권2호
• /
• pp.139-149
• /
• 2000

In the preliminary design stage of prestressed concrete (PSC) box girder bridges, the design factors decided by inexperience designer could heavily affect to the results of final design. There is a possibility that the design ends up with an excessively wasteful design. To achieve an economical design with preventing an excessive design, the optimal design technique has been developed using ADS optimal program and SPCFRAME in this study. The objective function for the optimal design problem is the material cost of box girders and constrained functions are constituted with design specifications and workability. The Sequential Unconstraint Minimization Technique (SUMT) is used for the optimal design in this study. We designed an uniform cross-section bridge and an ununiform cross-section bridge in the same design condition by optimal design technique developed in this study. Analyzing the results obtained for various tendon layouts, we suggest a standard tendon layout which gives the most effective structural behavior.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.239-245
• /
• 2000

The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.73-82
• /
• 2016

Recently, automobile industries have been developing many structural automotive parts made of thin, high-strength steel strips to produce safer and more environmentally friendly cars. The roll forming process has been considered one of the most efficient processes in manufacturing high-strength steel parts because it is a high-speed process that forms sheets in increments. However, most automotive parts vary longitudinally in their cross-sections. Therefore, it is difficult to apply the roll forming process to automotive parts made of high-strength steel. A variable section roll forming process has been proposed in recent studies. The rotational axes of the forming rolls are fixed, and the forming rolls have three-dimensional shape. As such, the cross-section of the part varies linearly along its length, and the angle between the bend line and longitudinal axis is less than 1 degree. Thus, the rate of cross-sectional variation along the length is relatively small. In this study, the rate of cross-sectional change along the length of a forming roll has been increased. Moreover, the angle between the bend line and longitudinal axis has been increased up to 15 degrees. The variable sections of the forming rolls have been designed for high strength steel parts with a symmetric u-type cross-section that varies linearly and symmetrically along the longitudinal axis.

• 전자공학회논문지D
• /
• 제36D권9호
• /
• pp.64-70
• /
• 1999

$100{\mu}m$ 이하의 길이를 가지는 두 개의 영역으로 구성된 수직 방향성 결합기의 영역 1의 출력단과 영역 2의 출력단에서 각각 30 dB 이상의 소멸비를 가지는 cross state와 bar state를 얻을 수 있었다. 각 영역의 두 도파로가 가질수 있는 여러 굴걸율 값에 대하여 향상된 결합모드 이론과 beam propagation method를 사용한 계산 결과의 분석을 통해 영역 1의 출력단과 영역 2의 출력단에서 각각 30 dB 이상의 소멸비를 가지는 cross state와 bar state를 얻을 수 있는 수직 방향성 결합기의 설계 지침을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.718-723
• /
• 1998

The program which could determine cross-sectional dimension of the prestressed concrete box girder bridges at the stage of preliminary design was developed using the optimal technique in this study. It could minimize the cost required in the design of box girder bridges and the construction with the full staging method. Objective cost function consisted of six independent variables such as height of cross-section, jacking force and thickness of web and bottom flange. The SUMT(Sequntial Unconstrained minimization Technique) was used to solve the constrained nonlinear minimization optimal problem. Using the program developed in this study, optimum design was performed for existing bridges with one cell cross section of constant depth. The result verify the compatibility of the program.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.118-125
• /
• 2015

The roll-forming process is a highly productive incremental forming process and is suitable for manufacturing thin, high-strength steel products. Recently, this process has been considered one of the most productive processes in manufacturing high-strength steel automotive structural parts. However, it is very difficult to develop the roll-forming process when the cross-sectional shape of the product changes in the longitudinal direction. In this study, a roll-forming process for manufacturing high-strength steel automotive parts with a linearly variable symmetric hat-type cross-section was developed. The forming rolls were designed by the 3D CAD system, CATIA. Additionally, the designed forming rolls were modified by the simulation through the 3D elastic-plastic finite element analysis software, MARC. The results of the finite element analysis show that the final roll-forming roll can successfully produce the desired high-strength steel automotive part with a variable cross-section.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.1073-1090
• /
• 2018

국내 공동구는 주로 신도시 개발사업에 포함되어 건설되었기 때문에 모두 개착 BOX 형태를 이루고 있으나 기존 시가지를 대상으로 독자적 공동구를 건설 중인 해외의 경우 터널식 공동구 형태를 주로 채택하고 있다. 공동구의 사회적 요구가 큰 중심가 도심지는 교통량이 많아 장기적으로 차로를 차단하거나 우회 차로 설치가 곤란한 것이 일반적이므로 터널식 공동구 설치가 합리적이라 하겠다. 이러한 터널식 공동구 활성화를 위해 공동구 최적 설계용량 및 수용시설(전력, 통신, 상수도 등)별 상호 영향인자(열간섭 및 전식, 유지관리 효율성 등)를 고려한 최적화된 단면설계 기술력을 확보할 필요가 있다. 터널식 공동구의 최적단면 설계기술이란 결국 공동구내 수용시설의 최적 배치기법을 도출하는 것이라 할 수 있다. 이러한 설계기법 도출을 위해 우선적으로 해외의 터널식 공동구(Shield TBM, Conventional Tunneling) 내공단면 적용 사례를 조사하여, 단면 내 수용시설의 배치현황, 부대시설 설치 등의 특징을 분석하고, 또한 국내 외의 공동구 설계기준 및 지침서에서 제시하고 있는 내공단면 설계(배치)와 관련한 기준사항들을 정리 분석할 필요가 있다.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.39-52
• /
• 2003

A computer program has been developed for the optimum design of prestressed concrete beams under flexure. Optimum values of prestressing force, tendon configuration, and cross-sectional dimensions are determined subject to constraints on the design variables and stresses. 28 constraints have been used including flexural stresses, cover requirement, the aspect ratios for top and bottom flanges and web part of a beam and ultimate moment. The objective function contains cost of concrete, prestressing force and formwork. Using this function, it is possible to obtain minimum cost design, minimum weight or cross-sectional area of concrete design and minimum prestressing force design. Besides the idealized I-shaped cross-section, which is widely used in literature, a general I-shaped cross-section with eight geometrical design variables are used here. Four examples, one of which is available in the literature and the others are modified form of it, have been solved for minimum cost and minimum cross-sectional area designs and the results are compared. The computer program, which employs modified grid search optimization method, can assist a designer in producing efficient designs rapidly and easily. Considerable savings in computational work are thus made possible.