• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.433-440
• /
• 2007

Recently, the reduction of standby power consumption is significantly issued in electronic and electrical industry for the conservation of environment. In the case of a switched mode power supply (SMPS), it is demanded high efficiency at extremely low output power conditions by consumers. However, it is very different from high efficiency techniques at full load conditions. In addition, many SMPSs are designed as a multi-output circuit for various loads because of cost down. This circuit is difficult to implement both high efficiency and good cross regulation performance, simultaneously. In this paper, secondary side post regulator (SSPR), current mode control method, and power sequence control technique are proposed to reduce standby power consumption and to improve cross regulation performance of the multi-output SMPSs which consist of single or multiple converter. The proposed methods are analyzed by their operational principles and optimal designs verified by experimental results with 110[W] and 270[W] SMPSs.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.358-366
• /
• 2011

Multi-criteria ABC inventory classification, which aims to classify inventory items by considering more than one criterion, is one of the most widely employed techniques for inventory control. The weighted linear optimization (WLO) model proposed by Ramanathan (2006) solves the problem of multi-criteria ABC inventory classification by generating a set of criterion weights for each inventory item and assigning a normalized score to the item for ABC analysis. However, the WLO model has some limitations. First, many inventory items can share the same optimal score, which can hinder a precise classification of inventory items. Second, the model allows too much flexibility in weighting multiple criteria; each item is allowed to choose its own weights so that it can maximize its score. As a result, if an item dominates the others in terms of a certain criterion, it may be classified into a higher class regardless of other criteria by assigning an overwhelming weight to the criterion. Consequently, an item with a high value in an unimportant criterion and low values in others may be inappropriately classified as class A, leading to an inaccurate classification of inventory items. To overcome these shortcomings, we extend the WLO model by using the cross-efficiency method in data envelopment analysis. We claim that the proposed model can provide a more reasonable and accurate classification of inventory items by mitigating the adverse effect of flexibility in the choice of weights and yielding a unique ordering of inventory items.

• International Journal of Contents
• /
• v.4 no.3
• /
• pp.1-9
• /
• 2008

The Korean life insurance industry has undergone profound changes, such as the beginning of the variable insurance in July 2001 and the bancassurance enforcement in August 2003. However, little empirical research has analyzed data that includes the bancassurance of life insurance companies operating in Korea. In response to this lack of research, this paper applies DEA (data envelopment analysis) models to measure and decompose their efficiency. We discovered that life insurance companies operating in Korea are a little different in their composition ratio of inputs and outputs, due to the increased variety of distribution channels and new products. We provided efficiency scores, return to scale, and reference frequencies. We also decomposed CCR, BCC, and SBM efficiency into scale efficiency and MIX efficiency. So, we try to investigate whether the sources of inefficiency were caused by the inefficient operation of DMU, disadvantageous conditions, the difference of the composition ratio in inputs and outputs with reference sets, or any combination of the above. Most companies in the sample display had either constant or decreasing returns to scale. The efficiency rankings were less consistent among models and efficient DMUs. In response to this problem, we used the super-efficiency model to rank them and then compared the rankings of the DMUs among the various models. It was also concluded that the availability of panel data, rather than cross-sectional data, would greatly improve the validity of the efficiency estimates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.776-780
• /
• 2007

In this paper, the charge pump circuit of a VPP generator for a low voltage DRAM is newly proposed. The proposed charge pump is a 2-stage cross coupled charge pump circuit. The charge transfer efficiency is improved, and Distributed Clock Inverter is located in each charge pump stage to reduce clock period so that the pumping current is increased. In addition, the precharge circuit is located at Gate node of charge transfer transistor to solve the problem which is that the Gate node is maintained high voltage because the boosted charge can't discharge, so device reliability is decreased. The simulation result is that pumping current, pumping efficiency and power efficiency is improved. The layout of the proposed VPP generator is designed using $0.18{\mu}m$ Triple-Well process.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.509-514
• /
• 2010

The purpose of this study is to analyze the technical efficiency and its determinants for Korean Apiculture farming by using from door to door and e-mail inquiry data. The analysis was implemented through the Cobb-Douglas stochastic frontier production function (SFPF) model including the technical inefficiency effect model for cross-sectional data. To measure the SFPF model, honey production was used for a dependent variable, and for input variables labor cost, preventive cost, material cost, feeding cost, depreciation cost were used. Farmer's age, farmer's career, farming scale, full-time or half-time firm and movement or fixed firm variables were used to measure the inefficiency effect model. The average technical efficiency on apiculture farming in Korea is estimated to be 0.8112. It means that there were technical inefficiency of about 18.88% in Korea apiculture farming. In this study there are some suggestions which could increase the technical efficiency of Korean apiculture farming.

• Advances in Computational Design
• /
• v.5 no.3
• /
• pp.261-276
• /
• 2020

The reasonable layout of vacuum cleaner can effectively improve the collection efficiency of iron filings generated in the process of steel production. Therefore, in this study, the CFD-DEM coupling model and two-fluid model are used to calculate the iron filings collection efficiency of vacuum cleaner with different inclination/cross-sectional area, pressure drop and inlet angle. The results are as follows: The CFD-DEM coupling method can truly reflect the motion mode of iron filings in pneumatic conveying. Considering the instability and the decline of the growth rate of iron filings collection efficiency caused by high pressure drop, the layout of 75° inclination is suggested, and the optimal pressure drop is 100Pa. The optimal simulation results based on two-fluid model show that when the inlet angle and pressure drop are in the range of 45°~65° and 70Pa~100Pa, larger mass flow rate of iron filings can be obtained. It is hoped that the simulation results can offer some suggestion to the layout of vacuum cleaner in the rolling mill.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.129-135
• /
• 2017

The respective delivering vehicle loaded with the own cargo moves into the respective delivery area. At the base, the delivery points D1 and D2, for example, have the same starting point but the destination is different. The average delivering time of the delivery vehicle is mostly more than 8 hours a day. Therefore, the efficiency of delivery is generally low. In this study, the deliveries will be forwarded from a base station to a delivery point where cross docking will be applied to a single vehicle, and will be distributed from the cross docking point through cross docking. If the distribution is implemented, one vehicle will not have to be operated from the base to the cross docking point. In that case, logistics cost will be reasonably saved by the reduction of transportation cost and labor time. If one vehicle only runs from the base to the cross docking point, each vehicle will be operated in two shifts, and the vehicle operation can be efficiently implemented. This research model is based on the assumption that the 3 types of ratios between the traffic volume of the vehicles starting at the base and the vehicles waiting at the cross docking point are set to the first ratio of 30% to 70%, the second ratio of 50% to 50% and the final ratio of 70% to 30%. As a result of the study, The delivery time in the cross docking point is much higher than that in present on the condition that the cargo volume in the D2 area is more than 50%. Likewise, the delivery time is slightly higher on the condition that the cargo volume is less than 50%. Time is reduced in terms of 50% model like AS-IS model.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.17-22
• /
• 2006

Both of district heating(DH) system and natural gas(NG) supply system have benefits in clean energy supply and having energy efficiency and savings. The issue of duplicate investment and supply requirement of only for cook occur several conflicts such as destruction of the Beneficiary Pays Principle and Cross Subsidization, etc. Under the circumstance, the purposes of this research are to consider several issues of cross subsidization in NG and DH industries and to present the following alternatives for resolving related problems. First of all, a charging mechanism in the energy cost must be improved so as to maintain the positive relation between cost and benefit. That is, the beneficiary-pay principle must be strictly applied. Secondly, the extended supply of DH through HOB(Heat Only Boiler) must be strictly limited. Finally, we need to improve efficiency for the benefit of market participants.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.610-617
• /
• 2009

This paper proposes a cross-layer design combining adaptive modulation and coding (AMC) with truncated hybrid automatic repeat request (HARQ) for wireless multicast transmission, in order to increase the spectral efficiency while meeting the target quality-of-service (QoS). In the design, we provide the selection criterion of AMC so as to satisfy the target packet error rate (PER) of all users when the multicast data is received through the common channel and the number of retransmission is limited by the delay constraint of the service. The analytically derived results show that the cross-layer design using HARQ provides a better spectral efficiency than the AMC without HARQ by allowing retransmission and code combining. It is also observed that the design for multicast outperforms that for unicast in the mid to high signal-to-noise ratio region.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.966-971
• /
• 2011

This study is designed to develop programs that analyze the distance of clothes from human skin and cross-sectional body figures based on 3D human body scan data, and to verify accuracy and efficiency of the program so that it can be used for clothing fit evaluation and 3D human body research. The auto cross-sectional imaging program was developed by using Visual C++ and OpenGL, and the 3D human body scan data were adopted to measure the space between skin and clothing. The space measurements were obtained by two widely used programs, RapidForm and AutoCAD, and a program devised by the researchers of this study. Measuring time and space measurements from different programs were compared in order to verify accuracy and efficiency of the newly-devised program. As a result, no significant difference was found in the measurements. However, the required time to measure one cross section was different within the significance level of 0.05, and the differences become more remarkable as the number of measuring and the angle of space between skin and clothing increase. Therefore, the program developed by this study is expected to be useful for research on body shapes and fit evaluation based on 3D human body scan data in the fashion field.