• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.63-68
• /
• 2008

Compared with past, helicopters have remarkably high level of safety and accidents due to mechanical defects are decreased about 15%. Most of their duties, however, are to commit at duty area which is hard to access. Because of them, collision probability is high and also has relatively higher accident rates than other aircraft with special mission. A result of analysis is that accident rate is relative high with prevention of disasters, putting out a fire and crop-dusting missions under 500ft. In addition, most of accidents are related with human factors. According to this, it is required to pilots who carry these mission that safety education and detailed analysis about their mission.

• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.223-227
• /
• 2007

Crop loss and damage by wildlife are becoming more serious to residents inside and around National Parks of Korea annually. It could be caused by small size of Parks, which is couples of ten $km^2$ only, and more than a third of total parks' areas are belonging to privates. Wild boar (Sus scrofa) is one of the most harmful pests in nationwide. Treading down crop field using as bedding or resting site are major damaged types and foraging behavior is following. Besides of boars, Korean water deer (Hydropotes inermis), racoon dog (Nyctereutes procyonoides), and badger (Meles meles) are another serious pests. Mainly, farm products planted in upland, such as corns, sweet potatoes, cabbages, etc. are harmed easily, a rate reaches up to 76.9% of whole losses. 92.4% (n=187) of interviewees, who are mostly seniors, cultivate small crop fields smaller than 1 ha. Crop damage would be started from June to late November, time differences are happened due to latitude, climate condition, and crop differences of National Parks. Dusting animal repellents are easier and widespread methods to prevent animal foraging to crop fields and installing noisy makers using gun powder and setting up scarecrows are traditional methods for repelling animals. Nevertheless, effects of these self-defence are turned out to be useful soon after labors done only. Since legal compensation for crop damages by wildlife are not prepared systematically so far, crop loss are rarely reported to local government by most farmers. Systematic and objective methods for quantifying of crop loss by wildlife and population managements system should be offered urgently to well-managed animals habitat and residents' living inside National Parks.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.144-153
• /
• 2017

In recent years, unmanned aerial vehicles (UAVs) have been developed and studied for various applications, including drone deliveries, broadcasting, scouting, crop dusting, and firefighting. To enable the wide use of UAVs, their exact aeroacoustic characteristics must be assessed. In this study, a noise prediction method for a ducted fan UAV with complicated geometry was developed. In general, calculation efficiency is increased by simulating a ducted fan UAV without the struts that fix the fuselage to the ducts. However, numerical predictions of noise and aerodynamics differ according to whether struts are present. In terms of aerodynamic performance, the total thrust with and without struts is similar owing to the tendency of the thrust of a blade to offset the drag of the struts. However, in aeroacoustic simulations, the strut effect should be considered in order to predict the UAV's noise because noise from the blades can be changed by the strut effect. Modelling of the strut effect revealed that the dominant tonal noises were closely correlated with the blade passage frequency of the experimental results. Based on the successful detection of noise sources from a ducted fan UAV system, using the proposed noise contribution contour, methods for noise reduction can be suggested by comparing numerical results with measured noise profiles.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.1-11
• /
• 2009

In this paper, two algorithms to solve the path planning problem with constraints from obstacles are presented. One proposed Algorithm is "Grid point-based path planning". The first step of this algorithm is to set points which can be the waypoints around the field. These points can be located inside or outside of the field or the obstacles. Therefore, we should determine whether those points are located in the field or not. Using the equations of boundary lines for a region that we are interested in is an effective approach to handle. The other algorithm is based on the boundary lines of the agricultural field, and the concept of this algorithm is well known as "boustrophedon method". These proposed algorithms are simple but powerful for complex cases since it can generate a plausible path for the complex shape which cannot be represented by using geometrical approaches efficiently and for the case that some obstacles or forbidden regions are located on the field by using a skill of discriminants about set points. As will be presented, this proposed algorithm could exhibit a reasonable accuracy to perform an agricultural mission.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.575-580
• /
• 2023

This study was prevent the decrease in crop output by insect pests and spraying by application uniformity. A flight level 4 m height and 4-5 m/sec. speed are difficult to maintain with a agricultural drone for aerial application, which has been affected by the methods or environmental factors, such as changes in the wind. Therefore, which can allow a controlled application width and spray rate automatically and verified experimentally using drone. The sprayed particles began to decrease from about 3.75 m on the left and right sides of the spray nozzle. According to the number of particles, the effective spraying width was observed to be about 7.5 m, and it was verified that the proposed spraying system was effective in uniform control system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.407-408
• /
• 2016

A drone has been popularized to such an extent as to be seen in the near parks recently. The drone refers to an unmanned aerial vehicle(UVA) which can fly and be steered by a radio wave without a pilot and it has a airplane or helicopter shape. The drone was first started to be used from military purpose, but its usage has been expanded to the private such as broadcast shooting, crop-dusting, field discovery and hobby. However the drone that we can see often in the market is expansive, hard to be repaired when it broken down and has a discomfort of the short flight time. In this paper, to solve an uncomfortable talk on the cheap ATmega128 Using (Quad copter) drone for implementation. Axes gyroscope and accelerometers mcu between posture an attitude control, communications through drone control, pid. Receiver input them into transmitter signals of movements to control drone c the programming was implemented in on the basis of language.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.300-308
• /
• 2019

For drones to be used for industrial or agricultural applications, it is necessary to increase the payload and endurance. Currently, the payload and endurance are limited by the battery technology for electric powered drones. In addition, charging or replacing the batteries may not be a practical solution at the field that requires near continuous operation. In this paper, a procedure to optimize the power system of an electric hybrid drone that consists of an internal combustion engine, a generator, a battery, and electric motors is presented. The example drone for crop dusting is sized for easy transportation with a maximum takeoff weight of 200 kg. The two main rotors that are mechanically connected to the internal combustion engine provides most of the lift. The drone is controled by four electric motors that are driven by the generator. By analyzing the flow of the energy, a methodology to select the optimum propeller and motor among the commercially available models is described. Then, a procedure of finding the optimum operational condition along with the proper gear reduction ratios for the internal combustion engine based on the test data is presented.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.9
• /
• pp.81-90
• /
• 2016

Recently drones have become popular enough to be one of the hobby. The drone refers to an unmanned aerial vehicle which can fly and be steered by a radio wave without a pilot and it has a airplane or helicopter shape. The drone was first started to be used from military purpose, but its usage has been expanded to the private such as construction site, crop-dusting, field discovery, freight shipping and drones to prevent cheating. However the drone that we can see often in the market is expansive, hard to be repaired when it broken down and has a discomfort of the short flight time. In this paper, to solve an uncomfortable talk on the cheap 8-bits microcontrollers ATmega128 Using drone for implementation. Axes gyroscope and accelerometers mcu between posture an attitude control, communications through drone control, pid. Receiver input them into transmitter signals of movements to control drone c the programming was implemented in on the basis of language. drone using ATmega128 microcontroller is possible hovering, By utilizing a pin that are not required for control it can be used as a drone for a variety of uses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.597-604
• /
• 2016

The aim of this study was to prevent the decrease in crop output by disease and insect pests and excessive spraying of agricultural pesticides by application uniformity. A 3m height and 15km/h speed is difficult to maintain with an unmanned helicopter for aerial application, which has been affected by the controlling habits and methods or environmental factors, such as changes in the wind. Therefore, in this study, an aerial application system was design to be attached to an unmanned helicopter, which can allow a controlled application width and spray rate automatically and verified experimentally using Rmax of MS-AVIATION. The size of agricultural land was 50 m2 and nine water sensitive cards were arranged at 1.25m intervals in 5 rows with each row having a 10m interval from the position of 5m. The unmanned helicopter was flying at speeds ranging from 7.2km/h to 17.6km/h and heights ranging from 2.32m to 3.47m. The proposed aerial application system allowed application uniformity by making a valid spraying area of 7.5 m2 with 46423 particles distributed on average.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.695-702
• /
• 2012

The chestnut management standard diagnostic table is developed and would be utilized in order that a manager raising chestnuts checks where the own level of management is and grasps current state of own for the purpose of planning aims and advancing toward a higher level. The developed 'Chestnut management standard diagnostic table' consisted of 3 first classified items, 19 second classified items and 2 product indicator items by the chestnut experts consultative meeting. A survey of 212 farmhouses in 4 major producing area was conducted. Except invalid survey of 53 farmers, 159 farmhouses interviewed were used in analysis. Total score was calculated with sum of each item's score. According to the survey results, average score is 68.0 and Buyeo received the highest score of 69.7 and Suncheon received the lowest score of 61.8 by regional groups. The higher the group in score, the better it is in output per hectare. But the property of 'the ratio of the best products in total products' does not show a statistical correlation. Generally the score of 'management-based evaluation indicator part' and 'management and sale capacity indicator part' in Suncheon was low because of many elderly people. In part of 'manufacturing technology indicator' as Environmentally-Friendly production is progressed in over 70% of four regions, when comes to a disease and insect pest control there are rarely farmhouses having a way of crop dusting.