• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.4
• /
• pp.307-316
• /
• 2010

Complex terrain refers to irregular surface properties of the earth that influence gradients in climate, lateral transfer of materials, landscape distribution in soils properties, habitat selection of organisms, and via human preferences, the patterning in development of land use. Complex terrain of mountainous areas represents ca. 20% of the Earth's terrestrial surface; and such regions provide fresh water to at least half of humankind. Most major river systems originate in such terrain, and their resources are often associated with socio-economic competition and political disputes. The goals of the TERRECO-IRTG focus on building a bridge between ecosystem understanding in complex terrain and spatial assessments of ecosystem performance with respect to derived ecosystem services. More specifically, a coordinated assessment framework will be developed from landscape to regional scale applications to quantify trade-offs and will be applied to determine how shifts in climate and land use in complex terrain influence naturally derived ecosystem services. Within the scope of TERRECO, the abiotic and biotic studies of water yield and quality, production and biodiversity, soil processing of materials and trace gas emissions in complex terrain are merged. There is a need to quantitatively understand 1) the ecosystem services derived in regions of complex terrain, 2) the process regulation occurred to maintain those services, and 3) the sensitivities defining thresholds critical in stability of these systems. The TERRECO-IRTG is dedicated to joint study of ecosystems in complex terrain from landscape to regional scales. Our objectives are to reveal the spatial patterns in driving variables of essential ecosystem processes involved in ecosystem services of complex terrain region and hence, to evaluate the resulting ecosystem services, and further to provide new tools for understanding and managing such areas.

• Hwankyungkyoyuk
• /
• v.18 no.3 s.28
• /
• pp.59-74
• /
• 2005

We can't deny Korean EE has basically developed on the basis of Environmental Possibilism (Environmental management or Reformism) in lots of aspects. I would show three representative proofs here, the first, the philosophy of Korean EE has been mainly focused on dichotomy of human-techno centrism and eco-centrism with no considering other alternative environmentalism since 4th Formal Curriculum, 1981. The second, simultaneously, the concept of EE has not distinguished from it of Science education. (Furthermore, unfortunately some says EE has been a part of Science education, although there should be many differences on its contextual aspect.) And the third one is that the limit of possibilism which market economists have worried, has scarcely mentioned in various kinds of EE-related teaching materials. Possibilism is basically likely to be accompanied by science and economics-oriented approach, and in this aspect this dichotomy, human-techno centrism and eco-centrism, has come from perspectives of Economical development process and over-addicted belief to Science. So it is enough to say that Korean EE has basically developed with biased to Environmental possibilism, in other words, biased to preference to it. And I'll critically focus on these two axes of possibilism, Science and Economics and its dichotomy. Of course, we should accept there are so many same parts in its contents between EE and Science, but we should know its contextual differences for triangular position of environmentalism suitable to EE and also overcome science-dependant approach to EE. Although science-dependant approach to EE and dichotomy could provide some tools for clearing up the causes of environmental problem, especially always it has insisted fundamental causes of environmental problem originated in human faults and over-use of eco-source or over-economic development, but now it is old-fashioned discourse, furthermore it come to have unavoidable limits in the debates of problem-solving mechanism to environmental problems. The paramount important thing is to supply the ways or thoughtful mechanism for solving or coordinating the Environmental problems, not just searching for cause of it. But scientific approach and its dichotomy based on possibilism have continuously born cause & effect in EE-related discourse. So there are so much needs to transfer from continuous bearing of cause & effect to constructive alternatives at least in environmentalism of EE. Traditionally, dichotomical division in EE Environmentalism, human-techno centrism and eco-centrism, couldn't have Provided any answers to our real society, it just gives us only cause & effects of Environmental problems. And also we can't find the description on the limits of capitalism market approach to Environmental problems especially in Korean EE text books, other teaching materials and its teaching-learning process, although market approach economist has been proved its fault beyond its functional merits as Environmental management tools. So we should introduce other alternative Environmental philosophy instead of Possibilism such as eco-socialism insisted by Schmacher M. and Boochin etc, or marxist-environmentalism for relative and comparative views to market-thought such as commodification. In this aspect we need to accept Oriental philosophy based on moderation(中庸) as new another alternatives with the reflection that we have recognized monism as representative Oriental philosophical environmentalism. Fundamentally monism has done its role with providing relative concepts to Dichotomy Enlightenment, but we can't say it has been core concept for understanding of oriental environmentalism, and we can't distinguish monism from oriental philosophy itself, just because oriental thought itself was basically monism. So conceptual difference should be recognized between EE and Science education in teaching-learning process on the basis of life-philosophy(Philosophie des Lebens) from epistemology. For this transformation, we should introduce existentialism in Science education, in other words, only existential Science education based on phenomenology or interpretivism can be EE. And simultaneously we need some ways for overcoming of scientific foundationalism which has been tradition making science not stand on existentialism, formulating and featuring of almost all of natural things and its phenomenon from after enlightenment in western world, but it has malfunctioned in fixing conception of science just into essentialism itself. And we also introduce integrated approach to science and society for EE like STS. Those are ways for overcoming of Environmental possibilism in EE.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.920-925
• /
• 2015

The microbial composition in Nuruk, a Korean cereal fermentation starter, is a critical factor for the quality and organoleptic properties of traditional alcoholic beverages. This study was aimed at monitoring the compositional change and enzyme activity of culturable lactic acid bacteria (LAB) in two types of Nuruk fermented at different temperatures. All culturable LAB were isolated at various time points (0, 3, 6, 10, 20, and 30 days) and identified by 16S rRNA sequencing. In traditional Nuruk type A (TN-A), which was fermented at $36^{\circ}C$, the population of total culturable LAB during the fermentation period was between $10^4$ and $10^5$ log CFU/mL. On the other hand, the LAB population in traditional Nuruk type B (TN-B) fermented at $45^{\circ}C$ (primary fermentation for 10 days) and $35^{\circ}C$ (secondary fermentation for 20 days) was $10^2$ log CFU/mL; however, these bacteria could not be detected after 6 days. Major LAB strains were identified in both Nuruk types: (1) from the MRS-culture of TN-A, Pediococcus pentosaceus at 3-30 days; (2) from MRS-culture of TN-B, P. pentosaceus at 3 days and Enterococcus hirae at 6 days. The protease activities of the dominant LAB isolated from the TN-A and TN-B cultures were within the ranges of 0.64~1.03 mg/mL and 0.74~0.81 mg/mL (tyrosine content), respectively, whereas the ${\alpha}$-amylase activities were 0.75~0.98 mg/mL and 0.78~0.79 mg/mL (amylose content), respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.835-852
• /
• 2000

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue and repair of function. For more than a decade there have been many efforts to develop materials and methods of treatment to promote periodontal wound healing. Recently many efforts are concentrated on the regeneration potential of material used in oriental medicine. In some in vitro and in vivo experiments, there have been many evidences that these materials have an effect on bone regeneration. The purpose of this study was to evaluate histologically and radiologically in Sprague-Dawley rats the effects of safflower seed extracts on the regeneration of the calvarial defects surgically produced. So in this study, the critical size defects were surgically produced in the calvarial bone of 30 Sprague-Dawley rats using the 8mm trephine bur. The safflower seed extract was applied into the defect of each rat in experimental group, whereas nothing was applied into the defect of each rat in control group. Rats were sacrificed at 2, 4, 8 weeks following operation and histomorphometric and radiodensitometric analysis were performed. 1. The newly formed bone length was $102.91{\pm}22.05$, $178.29{\pm}24.40$ at 2 week in the each control, experimental group, $130.95{\pm}39.24$, $242.62{\pm}50.33$ at 4 week and $181.53{\pm}76.35$, $240.36{\pm}22.00$ at 8 week($unit,{\mu}m$). In the 2, 4 week, there were statistically significant difference between control and experimental group(P<0.05). 2. The newly formed bone area was $2962.06{\pm}1284.48$, $10648.35{\pm}1284.48$ at 2 week, $5103.25{\pm}1375.88$, $9706.78{\pm}1481.81$ at 4 week, $8046.02{\pm}818.99$, $12057.06{\pm}740.47$ at 8 week($unit,{\mu}m^2$). In every week, there were statistically significant difference between control and experimental group(P<0.05). 3. The radiopacity was $14.26{\pm}.33$, $25.47{\pm}4.33$ at 2 week, $20.06{\pm}9.07$, $26.61{\pm}2.78$ at 4 week, $22.99{\pm}3.76$, $27.29{\pm}1.54$ at 8 week(unit, %). In the 2 week, there was statistically significant difference between control and experimental group(P<0.05). In conclusion, the results of the present study suggest that safflower seed extract initially has an effect on the newly formed bone area, length and radiopacity when it is applied to the calvarial defect of Sprague - Dawley rat. Then. the material has an effect on newly formed bone area and length.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• The Korean Journal of Archival Studies
• /
• no.12
• /
• pp.137-178
• /
• 2005

The anticommunist guerrillas' activities that aretheconcern of this article took place largely in North Korea or behind the enemy-held lines. Verifying their history is accordingly difficult and requires careful attention, but despite their active operations the military as well as the scholarly community have been lax in studying them. The Korean War came to be perceived as a traditional, limited war with regular battles, so that the studies addressed mostly the regular operations, and guerrilla warfare is remembered as an almost 'exclusive property' of the communist invaders; a small wonder that the anticommunist guerrillas have not been studied much and the collection of materials neglected. Therefore, in contrast with the witness accounts concerning regular battles, witness resources were of a small volume about these "patriots without the service numbers." For the above reasons the guerrilla participants and their later-organized fellowships took to the task of leaving records and compiling the histories of their units. They became active preservers of history in order to inform later generations of their works and also to secure deserved benefits from the government, in a world where none recognized their achievements. For instance, 4th Donkey Unit published witness accounts in addition to a unit history, and left video-recordings of guerrilla witnesses before any institute systematized the oral history of the guerrillas. In the case of Kyulsa ("Resolved to Die") Guerrilla Unit, the unit history was 10 times revised and expanded upon for publication, contributing substantially to the recovery of anticommunist guerrilla history which had almost totally lacked documented resources. Now because the guerrilla-related witness accounts were produced through fellowship societies and not individually, it often took the form of 'collective memory.' As a result, though thousands of former guerrillas remain surviving, the scarcity of numerous versions of, or perspectives upon, an event renders difficult an objective approach to the historical truth. Even requests to verify the service of a guerrilla member or to apply for decoration or government benefits for those killed in action, the process is taken care of not at the hands of the first party but the veteran society, so that a variety of opinions are not available for consideration. Moreover, some accounts were taken by American military personnel, and since some historians, unaware of official documents or evaluation of achievements, tended to center the records around their own units and especially to exaggerate the units' performances, they often featured factual errors. Thefollowing is the means to utilize positively the aforementioned type of witness accounts in military history research. It involves the active use of military historical detachments (MHD). As in the examples of those dispatched by the American forces during the Korean War, experts should be dispatched during, and not just after, wartimes. By considering and investigating the differences among various perspectives on the same historical event, even without extra documented resources it is possibleto arrive at theerrors or questionable points of the oral accounts, supplementing the additional accounts. Therefore any time lapses between witness accounts must be kept in consideration. Moreover when the oral accounts come from a group such as participants in the same guerrilla unit or operation, a standardized list of items ought to be put to use. Education in oral history is necessary not just for the training of experts. In America wherethefield sees much activity, it is used not only in college or graduate programs but also in elementary and lifetime educational processes. In comparison in our nation, and especially in historical disciplines, methodological insistence upon documented evidences prevails in the main, and in the fields of nationalist movement or modern history, oral accounts do not receive adequate attention. Like ancient documents and monuments, oral history also needs to be made a regular part of diverse resource materials at our academic institutes for history. Courses in memory and history, such as those in American colleges, are available possibilities.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.133-162
• /
• 1995

Paderborn's companies, Wameling and Cassau, produce the liturgical vestments, which have much traditional artistic merit. And Kevelaerer Fahnen + Paramenten GmbH, located in Kevelater which is a place of pilgrimage of the Virgin Mary, was known to Europe, Africa, America and the Scandinavia Peninsula as the "Hidden Company" of liturgical vesments maker up to now. Paderborn and Kevelaer were the place of the center of the religious world and the Catholic ceremony during a good few centries. The Catholic liturgical vestiments of these 3 companies use versatile design, color, shape and techniques. These have not only the symbolism of religion, but also can meet our's expectations of utilization of modern textile art, art clothing and wide-all division of design. These give the understanding of symbolic meanings and harmony according to liturgical vestments to the believers. And these have an influence on mental thinking and induction of religious belief to the non-believers as the recognition and concerns about the religious art. The liturgical vestments are clothes which churchmen put on at the all ceremonial function of a mass, a sacrament, performance and a parade according to rules of church. These show the represen-tation of "Holy God" in silence and distinguish between common people and churchmen. And these represent a status and dignity of churchmen and induce majesty and respect to churchmen. Common clothes of the beginning of the Greece and Rome was developed to Christian clothes with the tendency of religion. There were no special uniforms distinguished from commen people until the Christianity was recognized officially by the Roman Emperor Constantinus at A.D.313. The color of liturgical vestments was originally white and changed to special colors according to liturgical day and each time by the Pope Innocentius at 12th century. The color and symbolic meaning of the liturgical vestments of present day was originated by the Pope St. Pius(1566-1572). Wool and Linen was used as decorations and materials in the beginnings and the special materials like silk was used after 4th century and beautiful materials made of gold thread was used at 12th century. It is expected that there is no critical changes to the liturgical vestments of future. But the development of liturgical vestments will continues slowly by the command of conservative church and will change to simple and convenient formes according to the culture, the trend of the times and the fashion of clothes. The companies of liturgical vestments develop versatile design, embroidery technique and realization of creative design for distinction of the liturgical vestments of each company and artistic progress. The cooperation of companies, artists and church will make the bright future of these 3 companies. We expect that our country will be a famous producing center of the liturgical vestments through the research and development of companies, participation of artists in religeous arts and concerts of church.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2002

High energy photon beams from medical linear accelerators produce large scattered radiation by various components of the treatment head, collimator and walls or objects in the treatment room including the patient. These scattered radiation do not provide therapeutic dose and are considered a hazard from the radiation safety perspective. Scattered dose of therapeutic high energy radiation beams are contributed significant unwanted dose to the patient. ICRP take the position that a dose of 500mGy may cause abortion at any stage of pregnancy and that radiation detriment to the fetus includes risk of mental retardation with a possible threshold in the dose response relationship around 100 mGy for the gestational period. The ICRP principle of as low as reasonably achievable (ALARA) was recommended for protection of occupation upon the linear no-threshold dose response hypothesis for cancer induction. We suggest this ALARA principle be applied to the fetus and testicle in therapeutic treatment. Radiation dose outside a photon treatment filed is mostly due to scattered photons. This scattered dose is a function of the distance from the beam edge, treatment geometry, primary photon energy, and depth in the patient. The need for effective shielding of the fetus and testicle is reinforced when young patients ate treated with external beam radiation therapy and then shielding designed to reduce the scattered photon dose to normal organs have to considered. Irradiation was performed in phantom using high energy photon beams produced by a Varian 2100C/D medical linear accelerator (Varian Oncology Systems, Palo Alto, CA) located at the Yonsei Cancer Center. The composite phantom used was comprised of a commercially available anthropomorphic Rando phantom (Phantom Laboratory Inc., Salem, YN) and a rectangular solid polystyrene phantom of dimensions $30cm{\times}30cm{\times}20cm$. the anthropomorphic Rando phantom represents an average man made from tissue equivalent materials that is transected into transverse 36 slices of 2.5cm thickness. Photon dose was measured using a Capintec PR-06C ionization chamber with Capintec 192 electrometer (Capintec Inc., Ramsey, NJ), TLD( VICTOREEN 5000. LiF) and film dosimetry V-Omat, Kodak). In case of fetus, the dosimeter was placed at a depth of loom in this phantom at 100cm source to axis distance and located centrally 15cm from the inferior edge of the $30cm{\times}30cm^2$ x-ray beam irradiating the Rando phantom chest wall. A acryl bridge of size $40cm{\times}40cm^2$ and a clear space of about 20 cm was fabricated and placed on top of the rectangular polystyrene phantom representing the abdomen of the patient. The leaf pot for testicle shielding was made as various shape, sizes, thickness and supporting stand. The scattered photon with and without shielding were measured at the representative position of the fetus and testicle. Measurement of radiation scattered dose outside fields and critical organs, like fetus position and testicle region, from chest or pelvic irradiation by large fie]d of high energy radiation beam was performed using an ionization chamber and film dosimetry. The scattered doses outside field were measured 5 - 10% of maximum doses in fields and exponentially decrease from field margins. The scattered photon dose received the fetus and testicle from thorax field irradiation was measured about 1 mGy/Gy of photon treatment dose. Shielding construction to reduce this scattered dose was investigated using lead sheet and blocks. Lead pot shield for testicle reduced the scatter dose under 10 mGy when photon beam of 60 Gy was irradiated in abdomen region. The scattered photon dose is reduced when the lead shield was used while the no significant reduction of scattered photon dose was observed and 2-3 mm lead sheets refuted the skin dose under 80% and almost electron contamination. The results indicate that it was possible to improve shielding to reduce scattered photon for fetus and testicle when a young patients were treated with a high energy photon beam.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.42-52
• /
• 2008

Purpose: Resonance Frequency Analysis(RFA) technique can be used as an effective method in measuring the implant stability and documenting the clinical results. This technique also determines how stable the implant is before performing a prosthetic practice. Having become one the guidelines of the implant therapy whose final objective is the immediate loading, the $Osstell^{TM}$ mentor is giving a lot of information to the clinicians recently. In this communication, experiments were performed to investigate how reliable the measured ISQ values by $Osstell^{TM}$ mentor are, and to see if those are also stable even after sterilization. As five objectives: 1) How stable measured ISQ values after fixation $Smartpeg^{TM}s$ for 400 times. 2) How stable measured ISQ values after 'attach-detach'$Smartpeg^{TM}'s$ for 400 times. 3) How stable measured ISQ values after clinical sterilization methods. 4) How stable measured ISQ values after repeatedly sterilization in autoclave for 10 times. 5) What is the critical temperature which is lost the magnetism of $Smartpeg^{TM}$. Materials and Methods: Clinical sterilization methods(Autoclave sterilization, Dentistar sterilization, Ultra violet sterilization, Vacuum dry unit sterilization, Boiling water sterilization, combined $H_{2}O_{2}$ and Alcohol sterilization).$Smartpeg^{TM}s$. D3 Block bone($3{\times}9{\times}2cm$). Osstem implant(${\emptyset}4.1$-10mm).$Osstell^{TM}$ mentor. Individual experiment was used 8 number of $Smartpeg^{TM}s$ and they had measured to ISQ values of before experiment and after experiment. Results: 1. The measured ISQ values did not change after fixation $Smartpeg^{TM}s$ for 400 times. 2. There was no significant changes in the measured ISQ values of 'attach-detach $Smartpeg^{TM}s'$ for 400 times. 3. The measured ISQ values did not change after the usual clinical sterilization methods. 4. The measured ISQ values did not change after sterilization in autoclave for 10 times. 5. It was impossible to exactly measure the critical temperature which is lost the magnetism of $Smartpeg^{TM}s$. But, the results was resulted to lost its magnetism in higher temperature than $150^{\circ}C$/10 minute. Conclusion: The measured ISQ values showed insignificant differences in case of no changes in the magnetism of the $Smartpeg^{TM}s$. It seems that the $Smartpeg^{TM}s$ can be used repeatedly in every measurement if the original magnetisms of the $Smartpeg^{TM}s$ can be recognized. There seems to be no significant changes in the measured ISQ values of 'attach-detach $Smartpeg^{TM}s'$ only if the screw pitches were unimpaired. The clinical sterilization methods seems acceptable because the result was resulted to lost its magnetism in higher temperature than $150^{\circ}C$/10minute.