• KIEAE Journal
• /
• 제2권3호
• /
• pp.33-38
• /
• 2002

The intermediate range of temperatures($100{\sim}300^{\circ}C$) which can be achieved with CPCs(Compound Parabolic Concentrators) without tracking device provides both economic and thermal advantages for solar collector design. The present paper summarizes critical design considerations for CPC with cylindrical absorber and its optical performance using ray tracing program. Concentration ratios vary as acceptance half angle, ratio of reflector height to aperture width and ratio of reflector area to aperture area. This effects showed that the concentration ratio was increased as acceptance angle but optimum ratio of reflector height to aperture width existed at critical value. As a result of ray tracing, solar ray losses was maximized at acceptance half angle and this problem was solved by increasing absorber tube diameter. The concentrating flux distribution on the absorber surface was uniform but peak flux existed.

• Ocean Systems Engineering
• /
• 제2권4호
• /
• pp.239-255
• /
• 2012

Analysis of ship parametric roll has generally been restricted to simple analytical models and sophisticated time domain simulations. Simple analytical models do not capture all the critical dynamics while time-domain simulations are often time consuming to implement. The model presented in this paper captures the essential dynamics of the system without over simplification. This work incorporates various important aspects of the system and assesses the significance of including or ignoring these aspects. Special consideration is given to the fact that a hull form asymmetric about the design waterline would not lead to a perfectly harmonic variation in metacentric height. Many of the previous works on parametric roll make the assumption of linearized and harmonic behaviour of the time-varying restoring arm or metacentric height. This assumption enables modelling the roll motion as a Mathieu equation. This paper provides a critical assessment of this assumption and suggests modelling the roll motion as a Hills equation. Also the effects of non-linear damping are included to evaluate its effect on the bounded parametric roll amplitude in a simplified manner.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.976-981
• /
• 1986

본 연구에서는 판의 대변형이론을 도입하여 탱크저판의 두께, 탱크의 높이, 돌출부의 길이 등의 기하학적변수와 중심과 구석의 침하차를 무차원하여 이것들의 영 향으로 인한 처짐곡선과 반경 및 원주방향의 막력의 변화를 규명해보고자 한다. 또 한, 좌굴에 관한 8계미분방정식을 도입하여 셸 하단부의 전단력으로 인한 원통셸의 임 계좌굴력을 구하여 원통 셸의 안전성을 검토하고자 한다.

• Geomechanics and Engineering
• /
• 제28권5호
• /
• pp.463-475
• /
• 2022

In the mine exploitation stage; one of the critical issues is the stability assessment of post-pillars. The instability of post-pillars leads to serious safety hazards in mining operations. The focus of this study is to assess the stability of post-pillars in the 130# stope in the central ore body at Trepça hard rock mine by employing both conventional (i.e., critical span curve) and numerical methods (i.e., FLAC3D). Moreover, a new numerical based index (i.e., Pillar Yield Ratio-PYR) was proposed. The aim of PYR index is to determine a border line between stable, potentially unstable, and failure state of post-pillars at a specific mine site. The critical value of pillar width to height ratio is 2.5 for deep production stopes (e.g., > 800 m). Results showed that pillar size, mining height and mining depth significantly have affected the post-pillar stability. The reliability of numerical based index (i.e., PYR) is verified based on empirical underground pillar stability graph developed by Lunder, 1994. The proposed pillar yield ratio index and pillar stability graph can be used as a design tool in new mining areas at Trepça hard rock mine and for other situations with similar geotechnical conditions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제25회 학술발표회 초록집
• /
• pp.76-76
• /
• 2003

• 한국항해항만학회지
• /
• 제33권2호
• /
• pp.105-110
• /
• 2009

Shipwaves am have harmful effects on ships working on the sea, in a harbour or navigational channel and caused beach erosion, seawall destruction. This study aims to investigate describe the characteristics of the wave pattern generated by an individual model ship tested at different velocities and hull forms for a given water depth and to investigate the variations at a given distance from the sailing line under the same conditions. As a result, the angles a's by model ship tests are smaller than those by real ship ones. Wave heights decreases with an increasing the mid-ship cross sectional area $A_s$. The maximum wave height and period increase rapidly in the subcritical speed, and beyond the critical speed the height and period decrease with increasing depth Froude number. And the period keeps constant with the distance from the sailing line.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.479-490
• /
• 2005

The thermalhydraulic performance of a CANDU-6 reactor loaded with various CANFLEX fuel bundles is evaluated by the NUCIRC code, which is incorporated with recent models of pressure drop and critical heat flux (CHF) predictions based on high-pressure steam-water tests for the CANFLEX bundle as well as a 37-element bundle. The distributions of channel flow rate, channel exit quality, critical channel power (CCP), and critical power ratio (CPR) for the CANFLEX bundles (with natural or recycled uranium fuel) in the CANDU-6 reactor fuel channel are calculated by the code. The effects of axial and radial heat flux on CCP are evaluated by assuming that the recycled uranium fuel (CANFLEX-RU) has the same geometric data as the natural uranium fuel bundle (CANFLEX-NU), but a different power distribution due to different fuel composition and refueling scheme. In addition, the effects of pressure tube creep and bearing-pad height are examined by comparing various results of uncrept, and $3.3\%\;and\;5.1\%$ crept channels loaded with CANFLEX bundles with 1.4 mm or 1.7 mm high bearing-pads with those of the 37-element bundle. The distributions of the channel flow rate and CCP for the CANFLEX-NU or -RU bundle show a typical trend for a CANDU-6 reactor channel, and the CPRs are maintained above at least 1.444 (NU) or 1.455 (RU) in the uncrept channel. The enhanced CHF of the CANFLEX bundle (particularly with 1.7mm height bearing-pads) produces a higher thermal margin and considerably less sensitivity to CCP reduction due to the pressure tube creep than the 37-element bundle. The CCP enhancement due to the raised bearing-pads is estimated to be about $3\%\~5\%$ for the CANFLEX-NU and $2\%\~6\%$ for the CANFLEX-RU bundle, respectively.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권12호
• /
• pp.391-397
• /
• 2021

One of the sustainable development goals is to promote good health and well-being for all people. Child health is a top priority since their health issues can have a detrimental impact on human capital development, which is a critical input for the growth model. This paper applies the health production model to explore the determinants that influence the health of children under the age of five. The results of a survey of 203 households in Ho Chi Minh City, Vietnam, were examined. Child health is measured using anthropometric indicators such as weight-for-age, height-for-age, and weight-for-height (ZWFH). Three separate multinomial logistic models are regressed to examine the drivers of child health as proxied by z-score weight for age, z-score height for age, and z-score weight for height. The significance of input variables relating to a child's attributes, household, and environment was validated by the findings. The inclusion of overweight besides under-nourished indexes is novel because it reflects the current trend of child over-nutrition. The findings of the study highlight the importance of a wide range of initiatives to enhance child health. Moreover, the genetic effect is found to be crowded out by environmental and household factors. The finding verifies that despite their parents' moderate height, the future generation of Vietnamese can achieve the desired height.

• 대한한의학회지
• /
• 제39권4호
• /
• pp.16-29
• /
• 2018

Introduction: We aimed to investigate the predictive factors and optimal age for response to herbal medicine treatment for height gain in children. Methods: This retrospective chart review included 61 children (age range, 5-16 years) treated for height gain between 2011 and 2015. A predictive model was established by multiple linear regression analysis. Dependent variables were defined by the differences in percentile before and after herbal medicine treatment. The optimal cutoff value of patient age was determined by receiver operating curve analysis. Results : The age of initiation of herbal medicine therapy (p = 0.012) and administration of Forsythiae fructus (p = 0.002) were significant variables for treatment response. The adjusted R2 value was 0.231. The mean ages of the responder and non-responder groups were significantly different (p = 0.023). The optimal cutoff value of age for predicting treatment response was 9.75 years. Treatment response was better among children below 9.75 years of age. Conclusions: Patient age and administration of Forsythiae fructus were identified as determinants of response to herbal medicine treatment. Treatment of rhinitis and initiation of height gain treatment at an early age are critical for better response. These findings will provide fundamental data for further research.

• Structural Engineering and Mechanics
• /
• 제56권1호
• /
• pp.49-56
• /
• 2015

Dynamic compaction (DC) is a useful method for improvement of granular soils. The method is based on falling a tamper (weighting 5 to 40 ton) from the height of 15 to 30 meters on loose soil that results in stress distribution, vibration of soil particles and desirable compaction of the soil. Propagation of the waves during tamping affects adjacent structures and causes structural damage or loss of performance. Therefore, determination of the safe or critical distance from tamping point to prevent structural hazards is necessary. According to FHWA, the critical distance is defined as the limit of a particle velocity of 76 mm/s. In present study, the ABAQUS software was used for numerical modeling of DC process and determination of the safe distance based on particle velocity criterion. Different variables like alluvium depth, relative density, and impact energy were considered in finite element modeling. It was concluded that for alluvium depths less than 10 m, reflection of the body waves from lower boundaries back to the soil and resonance phenomenon increases the critical distance. However, the critical distance decreases for alluvium depths more than 10 m. Moreover, it was observed that relative density of the alluvium does not significantly influence the critical distance value.