• 한국수자원학회논문집
• /
• 제53권3호
• /
• pp.167-179
• /
• 2020

최근 바이오폴리머 소재를 이용하여 자연 흙의 강도와 식생의 생장을 증진하는 새로운 제방 소재가 개발되었다. 본 연구에서는 바이오폴리머 혼합토를 친환경 제방 재료로 활용하기 위해 혼합토로 조성된 식생 매트의 한계 소류력을 평가하였다. 혼합토는 베타글루칸을 주재료로 모래와 황토를 혼합하여 조성하였다. 실규모 시험체를 제작하여 혼합토를 3 cm 도포하였으며 식생과 매트를 이용하여 4개의 시험체를 제작하였다. 실규모 실험에 의해 손상과 토양유실을 관측하여 한계 소류력을 결정하였다. 식생 호안의 특성상 식생의 피복도에 따라 영향을 받기는 하지만 식생이 활착된 경우 개략적으로 한계소류력 42 N/㎡, 한계유속 4 m/sec을 실험을 통해 확인하였다. 또한 매트공법이 적용된 경우에는 뿌리와 매트의 결합으로 침식저항성이 강화됨을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.310-316
• /
• 2019

Fluidelastic instability is a key issue in steam generator tube bundles subjected in cross-flow. With a low flow velocity, a large amplitude vibration of the tube observed by many researchers. However, the mechanism of this vibration is seldom analyzed. In this paper, the mechanism of cross-flow effects on fluidelastic instability of tube bundles was investigated. Analysis reveals that when the system reaches the critical state, there would be two forms, with two critical velocities, and thus two expressions for the critical velocities were obtained. Fluidelastic instability experiment and numerical analysis were conducted to obtain the critical velocity. And, if system damping is small, with increases of the flow velocity, the stability behavior of tube array changes. At a certain flow velocity, the stability of tube array reaches the first critical state, a dynamic bifurcation occurs. The tube array returns to a stable state with continues to increase the flow velocity. At another certain flow velocity, the stability of tube array reaches the second critical state, another dynamic bifurcation occurs. However, if system damping is big, there is only one critical state with increases the flow velocity. Compared the results of experiments to numerical analysis, it shows a good agreement.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.77-92
• /
• 2003

사질토에서의 한계상태정수 결정시 근본적인 물리적 과정들과 고유적 인 한계성들을 파악하기 위하여 일련의 표준삼축시험을 실시하였다. 시험결과에 의하면, 주어진 흙에 대하여 한계상태마찰각은 배수조건에 상관없이 일정한 반면에, e-log p＇공간상에서의 한계상태선은 주로 표준삼축시험에서 충분치 못하게 도달하는 변형률과 비배수시험에서의 변형률 국지화효과 때문에 배수조건에 따라 다른 결과를 보였다. 실내시험을 통하여 한계상태정수를 산정하는 최선의 방법은 균일하고 느슨하게 성형된 시료를 배수조건하에서 전단하는 것으로 나타났다. 더불어 배수시험에서 다일러턴 시효과나 변형률 국지화효과를 피할 수 있는 시험을 계획하기 위한 참고상태정수를 제시하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.139-148
• /
• 2016

The passive control methods such as horizontal and vertical fences on the lower surface of the bluff body were applied to suppress the vortex shedding and enhance the aerodynamic stability of flow. For investigating the effects of the passive control methods, wind tunnel experiments on the unsteady flow field around a bluff body near a moving ground were performed. The boundary layer and velocity profiles were measured by the Hot Wire Anemometer (HWA) system and the vortex shedding patterns and flow structures in a wake region were visualized via the Particle Image Velocimetry (PIV) system. Also, it is a measuring on moving ground condition that the experimental values of the critical gap distances, Strouhal numbers and aerodynamic force FFT analyses. Through the experiments, we found that the momentum supply due to moving ground caused the vortex shedding at the lower critical gap distance rather than that of fixed ground. The horizontal and vertical fences increase the critical gap distance and it can suppress the vortex shedding. Consequently, the stability characteristics of the bluff body near a moving ground could be effectively enhanced by the simple passive control such as the vertical fences.

• 설비공학논문집
• /
• 제13권8호
• /
• pp.674-681
• /
• 2001

An experiment is conducted to investigate the effect of the inclination angle on convective boiling heat transfer of a uniformly heated tube. The test section used is a stainless steel tube with10.7mm in inner diameter. The hating length is 3m and is heated directly by an AC current. The test fluid is R-113. Experiment are carried out with mass flow rates of 300, 500 and $700\;kg/m^{2}s$, and heat fluxes varying from 5 to 65 kW/$m^2$. The inclination angles of the tube are $0^{\circ},\;5^{\circ},\;11^{\circ}\;and\;25^{\circ}$. the circumferential temperature variation at low quality region and the location of dryout at high quality region are mainly observed. Circumferential anisothermality occurring at low mass flow rate and low quality conditions is gradually reduced with the increase in the inclination angle and finally disappears at the inclination angle of $25^{\circ}$. Critical quality where dryout is initiated is seriously influenced by the inclination angle. Wall temperature after critical quality is also affected by the inclination angle.

• 한국환경농학회지
• /
• 제18권4호
• /
• pp.339-343
• /
• 1999

추석용으로 출하하고 있는 단감 `서촌조생`의 조기 수확을 위하여 착색증진용 생장조절물질인 에세폰의 적정농도를 구명코자 본 연구를 수행한 결과를 요약하면 다음과 같았다. 에세폰 적정농도 설정에서 에세폰을 고농도인 30∼40㎎/l로 처리하면, 과피색도가 증가하나 과육경도 및 연화과발생율이 많았고 또한 유통한계기간도 짧아 상품성 유지가 어려웠다. 반면 저농도인 10∼20㎎/l에서는, 과피색도, 과육경도, 연화과발생율 및 유통한계기간 등 모든 면에서 상품성이 높게 유지되었다. 그리고, 에세폰 처리에 의해 조기 수확한 과실의 가용성고형물 함량은 일반적인 수확기의 그것에 비해 매우 낮았는데, 가용성고형물 함량도 동시에 증가시킬 수 있는 연구가 앞으로의 과제라 하겠다.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.397-401
• /
• 2003

This experiment was conducted to know the characteristics of kernel growth as affected by various temperature regimes during grain filling using the varieties Hwaseongbyeo, Ilpumbyeo and Chucheongbyeo. The rice plants tested were grown in the natural condition at 1/5000a Wagner pots until flowering. After flowering, the rice plants were moved to controlled temperature conditions in a phytotron. The minimum/maximum daily temperature in the phytotron was controlled by 12/18, 15/21, 18/24, 21/27, and 24/$30^{\circ}C$, respectively. The grain weights were measured every three days after treatment. The mean daily kernel growth rate during active grain filling period showed different responses among varieties under various temperature regimes. The kernel growth rate of Chucheongbyeo was seriously reduced as temperature regimes were decreased. However, that of Ilpumbyeo was not influenced so critically. Ilpumbyeo showed some advantages in grain filling under low temperature regimes compared to Chucheongbyeo. The lag phase in grain filling of Chucheongbyeo was the longest among tested varieties, followed by Hwaseongbyeo under daily mean temperature regime of $15^{\circ}C$. Kernel weight of Ilpumbyeo increased fast in early grain filling phase under low temperature. This characteristic may be favorable for grain filling in temperate zone where the daily mean temperature is drastically dropped during grain filling period. Regression analysis with kernel growth rate and temperature showed the estimated critical low temperature for grain filling among varieties were $9^{\circ}C$, $12^{\circ}C$, $13^{\circ}C$ in Ilpumbyeo, Hwaseongbyeo and Chucheongbyeo, respectively. Under moderate temperature the duration of grain filling of Ilpumbyeo was longer than that of Chucheongbyeo. However, Under low temperature that of Ilpumbyeo was more favorable than Chucheongbyeo.

• 대한전자공학회논문지SD
• /
• 제39권10호
• /
• pp.1-8
• /
• 2002

C-V 방법은 소형화된 MOSFET에서 effective channel length(L/sub eff/)를 추출하기 위한 방법 중 한가지이다. 이 방법은 critical gate bias point에서 channel length에 영향을 받지 않는 extrinsic overlap 영역의 길이(△L)를 구하여 L/sub eff/를 추출하게 된다.본 논문에서는 서로 다른 두 개의 C-V 방법에 대해 실험을 수행하였다. 그리고 실험으로 추출한 값과 2차원 소자 시뮬레이터의 결과를 비교하여 C-V 방법의 정화도를 분석하였다.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.46-57
• /
• 1995

The aim of the present study is to provide fundamental informations for the development of magneticfluid actuator. To achieve the aim, oscillation characteristics of the magneticfluid plug are investigated by experiment for the various length and position of the magneticfluid plug and the frequency of magnetic field. The oscillation characteristics are obtained. Amplitude, natural frequency, phase shift and damping ratio, are compared with theoretical values. From the study, the following conclusive remarks can be made. The experimental equation for the magnetic field is obtained. The critical magneticfluid length exists and its value is about 70mm. The range of the damping ratio and fluid loss coefficient obtained by experiment are 0.1~0.2 and 30~100, respectively. Comparison between experimental and theoretical results of oscillation characteristics shows good agreement in the high frequency range. Meanwhile, in the low frequency range, there appears little discrepancies(5% in the frequency and amplitude and 10% in phase difference and damping ratio) with each other.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권4호
• /
• pp.46-52
• /
• 1988

The cavitation inception in oil hydraulic pipeline was investigated experimentally and numerically. In the experiment, negative pressures below-1 MPa(absolute pressure) were measured, associated with the transient flows in oil hydraulic pipeline. These experimental results show that the common hydraulic oil in the experimental pipeline withstands large tensions. In order to interpret the experimental results on cavitation inception, the growth of a spherical bubble in viscous compressible fluid due to a stepwise pressure drop was investigated by numerical analysis, and the critical bubble radius was obtained. The calculated value of the critical bubble radius corresponding to the negative pressure measured in the experiment is so small that the premised conditions about the bubble shape in the analysis is unsatisfactory. The physical significance of this calculated result implies the fact that there hardly exist free bubbles which can act as cavitation nuclei in the experimental pipeline.