• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.33-39
• /
• 1999

In this paper an experimenatal investigation of characteristics of developing ransitional steady flows in a square-sectional $180^{\circ}$ curved duct is presented, The experimental study is carried out to measure axial velocity profiles secondary flow velocity profiles and entrance length by using Laser Dopper Velocimeter(LDV) system. The flow development is found to depend upon Dean number and curvature ratio. Of special interest is the secondary flow generated by centrifugal effects in the plane of the cross-section of the duct. The secondary flows becomes strong from $120^{\circ}$ of bended angle on the duct. The entrance length of transitional steady flow is obtained to $120^{\circ}$ of bended angle of the duct in this experimental conditions.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.85-93
• /
• 2001

Minimized canister flow restriction and maximized flow uniformity are desired to maximize a purge capability. With the impending ORVR(On Board Refueling Vapor Recovery) systems, the reduction of restriction and increase of flow uniformity in a carbon canister becomes even more critical to meet the stringent regulation. In this study, three-dimensional numerical simulations have been performed to investigate the three-dimensional internal flow patterns in a carbon canister during purge. The effects of the declined angle of the purge pipe and the number of partitions on the pressure drop and purge efficiency in a carbon packed bed are examined. Results show that the purge efficiency and space velocity distribution are affected in the upstream region of 40% of total canister bed by porosity of carbon granule and angle of purge pipe. It is also found that the purge efficiency decreases with increasing the number of partitions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.47-50
• /
• 1988

In this paper, Rayleigh wave velocity has been measured by detecting the backscattered signal generating near the Rayleigh critical angle in the elastic medium. The rotating system has been made for the measurment of Rayleigh angle. It has been shown that the measured results has been good agreement with the theoretical value. The method of non-destructive evaluation using backscattering signal has been presented and the internal of IC sample has been displayed acoustic image with good contrast.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.1025-1033
• /
• 2001

A scaling analysis is provided which predicts the sliding velocity of a liquid drop down an inclined surface. The analysis is based on the balance of the gravitational work rate that drives the drop sliding and the resistances by capillary and viscous forces. The capillary resistance is accounted for via the contact angle hysteresis, which is quantified by measuring the critical inclination causing the drop to start sliding. The sliding of the drop is governed by the rate of the viscous dissipation of the Stokes flow. The analysis result in its limit form for small contact angles is consistent with previous results. In the experiments to verify the analysis results, the measured sliding velocity of various liquid drops are shown to obey the predictions made in this study.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2578-2582
• /
• 2008

In predicting the critical heat flux (CHF) in pool boiling systems, the contact angle between the boiling surface and the liquid and the surface roughness are considered to be the important parameters. From the microscopic viewpoint, those are affected by the micro/nano structure of the surface. Several studies have been reported on the dependence of CHF on the surface microstructure such as height and width of the cavities and distances between them. In this paper, the effects of the boiling surface characteristics on CHF are reviewed and the future research issues are discussed for better prediction of CHF.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1735-1737
• /
• 2003

To find the best intagliated shape on edgelit signboard, it was prepared wilt variations of illumination by changing the depth and angle of an engraved letter, the thickness of acrylic panel and wavelength of light source in this paper. As the result of analyzing optical design program, shallower depth and larger than critical angle on a visible side of panel, a favorable illumination characteristics was found. Also considering those factors, it was able to select the model which showed effectively engraved letter.

• 대한의용생체공학회:의공학회지
• /
• 제29권3호
• /
• pp.222-230
• /
• 2008

This paper introduces a method of estimating the knee joint moment developed during MVC. By combining the Hill-type muscle model and analytic results on moment arm and musculotendon length change as a function of hip and knee joint angle, the knee joint moment at a specific knee joint angle during MVC is determined. Many differences between the estimated results and the experimental data are noted. It is believed that these differences originate from inaccurate information on the muscle-tendon parameters. The establishment of exact values for the subject's muscle parameters is almost impossible task. However, sensitivity analysis shows that the tendon slack length is the most critical parameter when applying the Hill-type muscle model. The effect of a change of this parameter on the muscle length force relationship is analyzed in detail.

• 항공우주기술
• /
• 제2권2호
• /
• pp.1-10
• /
• 2003

비행선은 주익이 없고 미익에 비해 동체 효과가 큰 형상 특성으로 인해 정적으로 불안정한 특성을 지닌다. 따라서 동안정 특성 예측이 매우 중요하다. 본 연구에서는 강제진동 풍동시험을 통한 비행선의 동안정 특성을 확보하였다. 풍동시험은 미국 BAR사의 독일소재 시설인 BAR LAMP 시설을 사용하였으며, 16회의 정적시험과 26회의 강제진동시험을 수행하였다. 시험결과, 비행선의 동안정 특성은 받음각 뿐만 아니라 옆미끄럼각, 각속도 크기와 방향에 비선형적으로 변한다. 전반적으로 세 방향의 모멘트는 댐핑이 있는 것으로 나타났으며, 수직력과 측력, 교차성분은 불안정하게 나타났다. 조종면의 영향은 작은 것으로 나타났으나 옆미끄럼각의 영향은 완전히 비선형적으로 나타났다.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.297-316
• /
• 2014

This paper presents a detailed study focused on investigating the effects of silt content on the static and dynamic properties of sand-silt mixtures. Specimens with a low-plastic silt content of 0, 15, 30 and 50% by weight were tested in static triaxial, cyclic triaxial, and resonant columns in addition to consolidation tests to determine such parameters as compression index, internal friction angle, cohesion, cyclic stress ratio, maximum shear modulus, normalized shear modulus and damping ratio. The test procedures were performed on specimens of three cases: constant void ratio index, e = 0.582; same peak deviator stress of 290 kPa; and constant relative density, $D_r$ = 30%. The test results obtained for both the constant-void-ratio-index and constant-relative-density specimens showed that as silt content increased, the internal friction angle, cyclic stress ratio and maximum shear modulus decreased, but cohesion increased. In testing of the same deviator stress specimens, both cohesion and internal friction angle were insignificantly altered with the increase in silt content. In addition, as silt content increased, the maximum shear modulus increased. The cyclic stress ratio first decreased as silt content increased to reach the threshold silt content and increased thereafter with further increases in silt content. Furthermore, the damping ratio was investigated based on different silt contents in three types of specimens.