• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.286-293
• /
• 2006

Three hundred thirty two bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in Daejon area. Among them, one bacterial strain was selected for this study based on its low surface tension ability, and this selected bacterial strain was identified as Pseudomonas sp. G314 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. G314 showed a high resistance to antibiotics such as ampicillin, chloramphenicol, spectinomycin, and streptomycin, and heavy metals such as Li, Cr, and Mn. It was found that the optimal pH and temperature for biosurfactant production of Pseudomonas sp. G314 were pH 7.0 and $30^{\circ}C$, respectively. After seven hours of inoculated, the biosurfactant activity reached the maximum, and surface tension of the culture broth was decreased from 72 to 25 dyne/cm. The crude biosurfactant was obtained from the culture broth by acid precipitation, followed by solvent extraction, evaporation and then freeze drying. The CMC (critical micelle concentration) value of the crude biosurfactant was 20 mg/L.

• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.205-207
• /
• 1972

Dodecylquinolinium bromide has been synthesized and the critical micelle concentrations of it in the aqueous solution have been determined by the measurement of the surface tension and the electrical conductance. The values are $3.34 {\times} 10^{-3}mole/l$ and 3.41 {\times} $10^{-3}$mole/l, respectively. Since dodecylquinolinium bromide has the larger hydrophobic group than dodecylpyridinium bromide, it is considered that the former has the smaller critical micelle concentration than the latter.

• Structural Engineering and Mechanics
• /
• v.64 no.1
• /
• pp.1-10
• /
• 2017

The present paper deals with the free vibration and buckling problem with consideration of surface properties of circular nanobeams and nanoarches. The Gurtin-Murdach theory is used for investigating the surface effects parameters including surface tension, surface density and surface elasticity. Both linear and nonlinear elastic foundation effect are considered on the circular curved nanobeam. The analytically Navier solution is employed to solve the governing equations. It is obviously detected that the natural frequencies of a curved nanobeams is substantially influenced by the elastic foundations. Besides, it is revealed that by increasing the thickness of curved nanobeam, the influence of surface properties and elastic foundations reduce to vanished, and the natural frequency and critical buckling load turns into to the corresponding classical values.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.11
• /
• pp.964-969
• /
• 2003

The objective of this study is to investigate the effect of surfactant on the onset of Marangoni convection adapting a non-linear surface equation of state. The surface tension gradient with respect to the absorbate concentration, ${\gamma}$, is linearly related to the surface concentration of a surfactant with a coeffcient $x_{A}$. The numerical results show that the role of the initial surfactant concentration to Marangoni instability changes from the stabilizer to the destabilizer depending on the change of the sign of $x_{A}$ from negative to positive. It is concluded that for $x_{A}$>0 there is a critical modified Marangoni number of surfactant $M_{Ac}$ $^{*}$ above which liquid layer is always unstable against long wave disturbances.rbances.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.7-13
• /
• 2014

A cationic ester type surfactant, namely N-2-hydroxy-3-(2-hydroxyacetoxy) proply-N,N-dimethyldodecylaminium chloride(HPDA) was synthesized and confirmed by FT-IR and $^1H$-NMR spectroscopy. Surface tensions on the diluted aqueous solutions of the synthetic compounds were measured and evaluated critical micelle concentration. Surface tension was 33~34 dyne/cm in the range of $10^{-3}{\sim}10^{-2}mol/L$ and critical micelle concentration(c.m.c) value was $8.5{\times}10^{-3}mol/L$ by surface tension method. Emulsifying properties of the synthetic surfactant(HPDA) and Sodium lauryl sulfate (SLS), tetradecyl trimethyl ammonium bromide (TTAB) was tested. As a results, synthetic glycolic acid ester type compounds(HPDA) has been confirmed as a good emulsifier. The foaming power and stability of synthesized ester type surfactant was measured by Ross-Miles method.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.146-151
• /
• 2011

In this study, by using oleic acid and polypropylene glycol, good natured antifoaming agent for suitable electronics process under the alkaline conditions were synthesized. For the synthesized mono and diesters, acid value, hydroxyl value was measured, and identified by FT-IR and $^1H-NMR$ spectroscopy. Surface properties such as surface tension, critical micelle concentration(cmc) for diluted aqueous solution was measured, and tested the antifoaming properties according to the difference of alkyl chain length, various concentration, temperature and pH. The surface tension of synthesized antifoaming agent, PPMO(Polypropylene glycol monooleate) was 24.3 dyne/cm, PPDO(Polypropylene glycol dioleate) was 23.7 dyne/cm. By increasing of the alkyl chain length, surface tension was decreased slightly, and showed good antifoaming properties at 0.06 wt% concentration and $50^{\circ}C$, pH 11. These synthesized compounds are expected to apply as a suitable antifoaming agents in the semiconductor and the PCB(Printed Circuit Board) manufacturing process.

• Journal of Microbiology
• /
• v.43 no.3
• /
• pp.272-276
• /
• 2005

Bacillus subtilis ATCC 6633 was grown in BHIB medium supplemented with $Mn^{2+}$ for 96 h at $37^{\circ}C$ in a shaker incubator. After removing the microbial biomass, a lipopeptide biosurfactant was extracted from the supernatant. Its structure was established by chemical and spectroscopy methods. The structure was confirmed by physical properties, such as Hydrophile-Lipophile Balance (HLB), surface activity and erythrocyte hemolytic capacity. The critical micelle concentration (cmc) and erythrocyte hemolytic capacity of the biosurfactant were compared to those of surfactants such as SDS, BC (benzalkonium chloride), TTAB (tetradecyltrimethylammonium bromide) and HTAB (hexadecyltrimethylammonium bromide). The maximum hemolytic effect for all surfactants mentioned was observed at concentrations above cmc. The maximum hemolytic effect of synthetic surfactants was more than that of the biosurfactant produced by B. subtilis ATCC 6633. Therefore, biosurfactant would be considered a suitable surface-active agent due to low toxicity to the membrane.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.65-70
• /
• 1998

The physiochemical properties of extracellular lipid produced by an oleaginous yeast, Rhodotorula glutinis K-501 were examined. From the analytical experiments, it was suggested that the extracellular lipid produced is glycolipidic compound. Critical micelle concentration and minimum surface tension of the extracellular lipid in aqueous solution were 89mg/L and 31dyne/cm, respectively. Surface tension was also constant throughout wide range of pH. The emulsifying abilities and dispersing power of the extracellular lipid were much greater than those of commercial surfactants such as Tween 80 and Triton X-100 by factors of 2-3 and 1.3, respectively.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.241-246
• /
• 2019

In this paper, reactive surfactants were synthesized by using acrylic acid or 3-butenoic acid as nonionic surfactants, polyoxyethylene(23) lauryl ether (Brij 35) and polyoxyethylene(20) stearyl ether (Brij S20). The synthesis of surfactants was confirmed by FT-IR and $^1H$-NMR. The surface tension, emulsifying property, and foam power and stability were also measured. The surface tension value was 35~41 dyne/cm at an critical micelle concentration (cmc) which was measured as $1.0{\times}10^{-4}{\sim}9.7{\times}10^{-5}mol/L$ using a surface tension method. The emulsifying power of synthesized surfactant was measured with benzene, soybean oil and monomer. Also, the initial height of the bubbles and the height after 5 minutes were measured and the values were compared with each other.

• Solar Energy
• /
• v.8 no.1
• /
• pp.33-40
• /
• 1988

The characteristics of thermal instabilities of natural convection in a horizontal fluid layer bounded below by a rigid plate and above by an interface with a passive gas is presented. The critical Grashof number decreases as the surface tension gradient effect (Marangoni effect) at the interface increases and the flow remains unstable for a critical Marangoni number depending on Prandtl numbers. These results are in substantial agreement with those of Smith and Davis.