• 대한치과기공학회지
• /
• 제44권3호
• /
• pp.81-88
• /
• 2022

Purpose: This study was conducted to verify the effects of self-esteem and critical thinking disposition on dental laboratory technology students' field practice stress. Methods: The subjects of the study were 198 dental laboratory technology students with clinical practice experience located in Gyeongsangbuk-do and Gyeongsangnam-do. The collected data were analyzed by t-test, ANOVA, correlation analysis, and linear regression analysis using IBM SPSS Statistics ver. 22.0 (IBM). Results: The average self-esteem, critical thinking disposition, and field practice stress scores were 3.76, 3.50, and 2.40, respectively. There was a significant correlation between self-esteem, critical thinking disposition, and field practice stress. It was found that the higher the self-esteem, the lower was the field practice stress. On the contrary, among the sub-items of critical thinking disposition, when intellectual fairness increased, the field practice stress decreased; however, when healthy skepticism increased, the field practice stress increased. Conclusion: Self-esteem and critical thinking disposition were both found to have a substantial effect on field practice stress. Therefore, various educational programs need to increase self-esteem and cultivate critical thinking skills for a successful field practice and field practice stress relief of laboratory technology students.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.370-375
• /
• 2016

Tensile tests and creep tests were carried out at high temperatures on an Al-$Al_4C_3$ alloy prepared by mechanical alloying technique. The material contains about 2.0% carbon and 0.9% oxygen in mass percent, and the volume fractions of $Al_4C_3$ and $Al_2O_3$ particles are estimated at 7.4 and 1.4%, respectively, from the chemical composition. Minimum creep rate decreased steeply near two critical stresses, ${\sigma}_{cl}$ (the lower critical stress) and ${\sigma}_{cu}$ (the upper critical stress), with decreasing applied stress at temperatures below 723 K. Instantaneous plastic strain was observed in creep tests above a critical stress, ${\sigma}_{ci}$, at each test temperature. ${\sigma}_{cu}$ and ${\sigma}_{ci}$ were fairly close to the 0.2% proof stress obtained by tensile tests at each test temperature. It is thought that ${\sigma}_{cl}$ and ${\sigma}_{cu}$ correspond to the microscopic yield stress and the macroscopic yield stress, respectively. The lower critical stress corresponds to the local yield stress needed for dislocations to move in the soft region within subgrains. The creep strain in the low stress range below 723 K arises mainly from the local deformation of the soft region. The upper critical stress is equivalent to the macroscopic yield stress necessary for dislocations within subgrains or in subboundaries; this stress can extensively move beyond subboundaries under a stress above the critical point to yield a macroscopic deformation. At higher temperatures above 773 K, the influence of the diffusional creep increases and the stress exponent of the creep rate decreases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1358-1361
• /
• 2003

In this study, intrinsic static/dynamic fracture toughness of Al 7175-T74 are evaluated from the apparent static/dynamic toughness of notched specimen. The notch/crack critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The notch/crack critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, critical notch root radius can be predicted by notch/crack critical average stress fracture model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.37-42
• /
• 2003

The problem of an orthotropic material with a central crack is studied. The material is subjected to uniform biaxial loading along its boundary. The normal stress ratio theory is applied to predict fracture strength behavior in cracked orthotropic material. The dependence of the critical stress with respect to the biaxial loading and the crack orientation is discussed. Our analysis shows significant effects of biaxial loading on the critical stress. The additional tenn in the asymptotic expansion of the crack tip stress field appears to provide more accurate critical stress prediction.

• Perspectives in Nursing Science
• /
• 제8권2호
• /
• pp.105-112
• /
• 2011

Purpose: The purpose of this study was to identify the predictors of job stress in hospital nurses. The predictors of job stress were the subject's general characteristics, communication style, critical thinking disposition and job satisfaction. Methods: 294 nurses who had worked in a hospital participated in this study. The data were analysed with descriptive analysis methods including a t-test, ANOVA, Scheffe test, Pearson correlation coefficient and multiple regression analysis. Results: The job stress score for nurses was 111.6. There was a statistically significant difference between job stress and marriage status (p<.001), education (p<.001), clinical career (p<.001), position (p<.001), communication style (p<.001), critical thinking disposition (p<.001), and job satisfaction (p<.001). Critical thinking disposition, job satisfaction and clinical career together accounted for 36.88% of the total variation in job stress. Conclusion: Based on the findings of this study, the development of a nursing intervention program that can lead to an improvement in critical thinking disposition is suggested.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1021-1026
• /
• 2003

The problem of predicting the fracture strength behavior in orthotropic plate with a crack inclined with respect to the principal material axes is analyzed. Both the load to cause fracture and the crack direction of crack growth arc of interest. The theoretical results based on the normal stress ration theory show significant effects of biaxial loading and the fiber orientation on the crack growth angle and the critical stress. The additional term in the asymptotic expansion of the crack tip stress field appears to provide more accurate critical stress prediction.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.292-296
• /
• 2008

A new method of evaluating critical damage values of commercial materials is presented in this paper. The method is based on the previous study of the methodology [1] of acquisition of true stress-strain curves or flow stress curves over large strain from the tensile test in which the flow stress is described by the Hollomon law-like form, that is, by the strain dependent strength coefficient and the strain hardening exponent. The strain hardening exponent is calculated from the true strain at the necking point to meet the Considere condition. The strength coefficient is assumed to be constant before necking and represented by a piecewise linear function of strain after necking. With the predicted flow stress, a tensile test is simulated by a rigid-plastic finite element method with higher accuracy of less than 0.5% error between experiments and predictions. The instant when the fracture begins and thus the critical damage is obtained is determined by observing the stress variation at the necked region. It is assumed that the fracture due to damage begins when the pattern of stress around the necked region changes radically. The method is applied to evaluate the critical damage of a low carbon steel.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.606-621
• /
• 2004

A dynamic analysis using a hybrid finite element method was performed to characterize the effects of a number of manufacturing errors on bearing forces and critical tooth stress in the elements of a planetary gear system. Some tolerance control guidelines for managing bearing forces and critical stress are deduced from the results. The carrier indexing error for the planet assembly and planet runout error are the most critical factors in reducing the planet bearing force and maximizing load sharing, as well as in reducing the critical stress.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.136-139
• /
• 2000

The relations between tensile stresses and critical current densities (J$_c$) of coated conductors were measured. Around 320 MPa of tensile stress, the critical current densities of coated conductor fabricated on pure Ni tape were reduced to zero at 77K, where J$_c$ for zero stress was order of 10$^5$A/cm. The critical tensile stress was much enhanced for the coated conductors fabricated on NiCr alloy tapes. However fabrication conditions for the growth on such alloys are much different from those on the pure Ni and it was not easy to get good textures and large critical currents. The detailed fabrication methods on those alloys will be presented.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1251-1252
• /
• 2006

In order to investigate 95% retained critical current of Bi-2223/Ag tapes under various stress-strain conditions, load cell attached tension and bending apparatus was used. The critical current of stress-strained tape was degraded below 95% retained critical current when tension and bending was simultaneously applied together. But only one of this tension or bending did not degrade the tape below 95% retained critical current. Deformation temperature was important to maintain the 95% retained Ic of Bi-2223/Ag tapes after bending or tension deformation because mechanical strength of tapes can be changed drastically between room temperature and 77 K.