• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.324-330
• /
• 1998

The forced vibration analysis of the outer-clamped spinnig annular disk with arbitrary in-plane is formulated to investigate the influence of non-uniform tension on the cutting accuracy of wafer cutting machine. The arbitrary in-plan force along the outer edge of an annular plate is expressed as a Fourier series. Galerkin method and modal superposition method are employed to obtain the forced responses under the static force and the impulse force in astationary coordinate. Through qualitative and quantitative analyses, it can be found that forced and impulse responses are sensitive to the non-uniformity of in-plane force, which can bring a bad effect to the accuracy of wafer cutting process. Also, in case of a spinning disk with non-uniform in-plane force, critical speed is required to define in a different way, compared with conventional definition in axi-symmetrical spinning disk.

• Structural Engineering and Mechanics
• /
• v.64 no.6
• /
• pp.751-763
• /
• 2017

This article deals with the buckling behaviour of multilayered magneto-electro-elastic (MEE) plate subjected to uniaxial and biaxial compressive (in-plane) loads. The constitutive equations of MEE material are used to derive a finite element (FE) formulation involving the coupling between electric, magnetic and elastic fields. The displacement field corresponding to first order shear deformation theory (FSDT) has been employed. The in-plane stress distribution within the MEE plate existing due to the enacted force is considered to be equivalent to the applied in-plane compressive load in the pre-buckling range. The same stress distribution is used to derive the potential energy functional. The non-dimensional critical buckling load is accomplished from the solution of allied linear eigenvalue problem. Influence of stacking sequence, span to thickness ratio, aspect ratio, load factor and boundary condition on critical buckling load and their corresponding mode shape is investigated. In addition, static deflection of MEE plate under the sinusoidal and the uniformly distributed load has been studied for different stacking sequences and boundary conditions.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.111-116
• /
• 2000

A semi-infinite interfacial crack propagated with constant velocity in two bonded anisotropic strip under out-of-plane clamped displacements is analyzed. The asymptotic stress and displacement fields near the crack tip are obtained, where the results get more general expressions applicable not only to isotropic/orthotropic materials but also to the extent of the anisotropic material having one plane of elastic symmetry for the interfacial crack. The dynamic stress intensity factor is obtained as a closed form, which is decreased as the velocity of crack propagation increases. The critical velocity where the stress intensity factor comes to zero is obtained, which agrees with the lower value between the critical values of parallel crack merged in the material 1 and 2 adjacent to the interface. The dynamic energy release rate is also obtained as a form related to the stress intensity factor.

• Structural Engineering and Mechanics
• /
• v.39 no.1
• /
• pp.115-123
• /
• 2011

The present work deals with obtaining the critical buckling load and the natural frequencies of clamped, orthotropic, rectangular thin plates subjected to different linear distributed in-plane forces. An analytical solution is proposed. Using the Ritz method, the dependence between in-plane forces and natural frequencies are estimated for various plate sizes, and some results are compared with finite element solutions and where possible, comparison is made with previously published results. Beam functions are used as admissible functions in the Ritz method.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.87-92
• /
• 2000

In order to improve the instability of Plane journal bearing, it is introduced the leaf spring damper(LSD). The effects of dynamic characteristics of LSD on the stability of a plane journal bearing were investigated theoretically. The improvements on the stability of a plane journal bearing with LSD. are compared with the results of a floating ring journal bearing and of journal bearing without LSD. It found that a plane journal bearing with LSD will be an effective way in the improvement on the stability of rotor system.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.179-184
• /
• 2001

In order to improve the instability of plane journal bearing, it is introduced the leaf spring damper(LSD). The effects of dynamic characteristics of LSD on the stability of a plane Journal bearing were investigated theoretically. The improvements on the stability of a plane journal bearing with LSD are compared with the results of a floating ring journal bearing and of journal bearing without LSD. It found that a plane journal bearing with LSD will be an effective way in the improvement on the stability of rotor system.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.2
• /
• pp.122-128
• /
• 2009

The failure responses of adhesively bonded, hat stiffened structures are studied through numerical analysis using the finite element method. The responses are evaluated numerically for the bonded hat section/substrate structures containing different combinations of materials. It is studied what kind of material combinations causes the easier crack initiation in the structure. This study is conducted under plane strain conditions and J-integral via a commercial code ABAQUS as a total critical energy release criterion was used for observation on crack initiation. Also, the influence of adhesive on the structure is studied.

• Korean Journal of Mathematics
• /
• v.17 no.4
• /
• pp.375-383
• /
• 2009

In this note, we determine the properties of the coefficients of Bell domains in the plane and find some coefficients to consist of Bell domain.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.424-429
• /
• 1998

Numerical studies are performed to investigate the behavior of flat plates under combined in-plane and out-of-plane loads. The numerical model is verified by comparison with experiments for plates simply supported on four edges. Through study on different load combination and loading sequence, the critical load condition that governs the strength of the flat plate is determined. Parametric studies are performed to investigate the buckling coefficient and the effective flexural rigidity so that the moment magnification method is applicable to the flat plates.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1420-1424
• /
• 2011

When it developes the railway system, safety is one of the most important and necessary things. SCADE SUITE has been used in many systems, like plane, transportation, nuclear power, etc, who have high priority to safety. This document introduces where SCADE SUITE has been used and describes how develope safety-critical system with SCADE.