• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1949-1957
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of a planetary gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The minimum rim thickness limit should be determined considering not only the critical stress but also the load sharing. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• Structural Engineering and Mechanics
• /
• 제15권5호
• /
• pp.495-511
• /
• 2003

New material applications and transparency are desired by contemporary architects. Its superb transparency and high strength make glass a very suitable building material -in spite of its brittleness- even for primary load bearing structures. Currently we will focus on load bearing glass beams, subjected to different loading types. Since glass beams have a very slender, rectangular cross section, they are sensitive to lateral torsional buckling. Glass beams fail under a critical buckling load at stresses that lie far below the theoretical simple bending strength, due to the complex combination of torsion and out-of-plane bending, which characterises the instability phenomenon. The critical load can be increased considerably by preventing the upper rim from moving out of the beam's plane. Different boundary conditions are examined for different loading types. The load carrying capacity of glass beams can be increased three times and more using relatively simple, cheap lateral restraints.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.671-685
• /
• 2020

This manuscript presents impacts of gradation of material functions and axial load functions on critical buckling loads and mode shapes of functionally graded (FG) thin and thick beams by using higher order shear deformation theory, for the first time. Volume fractions of metal and ceramic materials are assumed to be distributed through a beam thickness by both sigmoid law and symmetric power functions. Ceramic-metal-ceramic (CMC) and metal-ceramic-metal (MCM) symmetric distributions are proposed relative to mid-plane of the beam structure. The axial compressive load is depicted by constant, linear, and parabolic continuous functions through the axial direction. The equilibrium governing equations are derived by using Hamilton's principles. Numerical differential quadrature method (DQM) is developed to discretize the spatial domain and covert the governing variable coefficients differential equations and boundary conditions to system of algebraic equations. Algebraic equations are formed as a generalized matrix eigenvalue problem, that will be solved to get eigenvalues (buckling loads) and eigenvectors (mode shapes). The proposed model is verified with respectable published work. Numerical results depict influences of gradation function, gradation parameter, axial load function, slenderness ratio and boundary conditions on critical buckling loads and mode-shapes of FG beam structure. It is found that gradation types have different effects on the critical buckling. The proposed model can be effective in analysis and design of structure beam element subject to distributed axial compressive load, such as, spacecraft, nuclear structure, and naval structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.132-137
• /
• 1997

In this study, the effect of load torque on the synchronous whirling of a rotor system has been studied analytically. Results show that the critical value of load torque to damping exists above which synchronous response decreases with increasing load torque. It has been also shown that the synchronous whirling amplitudes are more sensitive to the value of eccentricity and the ratio of disk radius to shaft length of the rotor system than other design parameters for a fixed value of load torque.

• 대한토목학회논문집
• /
• 제4권1호
• /
• pp.93-101
• /
• 1984

본(本) 논문(論文)에서는 일정변단면장주(一定變斷面長柱)의 탄성임좌굴하중(彈性臨挫屈荷重)을 구하는 각산식(咯算式)을 제시(提示)하였다. 특히, 고가도로설계시(高架道路設計時) 자주 나타나는 일단고정(一端固定) 타단자유(他端自由)인 중실원형(中實圓形) 및 구형단면(矩形斷面)에 한(限)하였다. 처짐곡선 미분방정식(微分方程式)의 정밀해(精密解)는 Bessel 함수(凾數)로 나타나는데, Bisection method를 이용하여 Computer로 수치해석(數値解析)하였다. 또 자중(自重)고려시 F.E.M에 의한 해석(解析)은 고유치(固有値) 문제(問題)가 되므로 Jacobi method를 이용하여 수치해석(數値解析)하였고, 균일단면장주(均一斷面長柱)의 정밀해(精密解)와 비교(比較)하여 F.E.M에 의한 근사해(近似解)의 신뢰도(信賴度)를 높였다. 그 결과(結果) 일정변단면장주(一定變斷面長柱)의 임계좌굴하중(臨界挫屈荷重)은 형상계수(形狀係數)와 단면변화율(斷面變化率)에 대해 균일단면장주(均一斷面長柱)의 비례식(比例式)으로 나타낼 수 있었다.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.33-41
• /
• 2019

The influence of two parameters on fatigue damage predictions of a variably loaded cantilever beam has been examined. The first parameter is the geometry of the cantilever beam and the weld connecting it to a rear panel. Variables of the geometry examined here include the cantilever length, the weld width on the critical cross-section and the angle of the critical cross-section. The second parameter is the safety factor, as set out by the Eurocode 3 standard. An analytical approach has been used to calculate the stresses at the critical cross-section and standard rainflow counting has been used for the extraction of the load cycles from the load history. The results here suggest that a change in the width and angle of the critical cross-section has a non-linear impact on the fatigue damage. The results also show that the angle of the critical cross-section has the biggest influence on the fatigue damage and can cause the weld to withstand fatigue better. The second parameter, the safety factor, is shown to have a significant effect on the fatigue damage calculation, whereby a slight increase in the endurance safety factor can cause the calculated fatigue damage to increase considerably.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.606-621
• /
• 2004

A dynamic analysis using a hybrid finite element method was performed to characterize the effects of a number of manufacturing errors on bearing forces and critical tooth stress in the elements of a planetary gear system. Some tolerance control guidelines for managing bearing forces and critical stress are deduced from the results. The carrier indexing error for the planet assembly and planet runout error are the most critical factors in reducing the planet bearing force and maximizing load sharing, as well as in reducing the critical stress.

• 항공우주시스템공학회지
• /
• 제1권4호
• /
• pp.28-36
• /
• 2007

This paper presents critical buckling loads of laminated composites under cylindrical bending. In-plane displacements are assumed to vary exponentially through plate thickness. The accuracy of this theory is examined for symmetric/antisymmetric cross-ply, angle-ply and unsymmetric laminates under cylindrical bending. Analytical solutions are provided to investigate the effect of transverse shear deformation on critical buckling loads of the laminated plates, and the results are compared with those obtained from the first-order shear deformation plate theory and the classical laminated plate theory.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.302-309
• /
• 2017

이론적 연구를 통하여 말뚝지름과 말뚝설치간격, 성토재의 내부마찰각 그리고 성토고가 성토지지말뚝의 아칭효율에 미치는 영향을 살펴보았다. 성토지지말뚝 상부의 성토체에 발생하는 아치모델에 대하여 아칭효율을 계산함에 있어 아치의 천정부파괴 및 말뚝캡에 작용하는 하중계산을 통한 아칭효율이 같게 되는 임계 상대간격비를 구할 수 있는 식을 제시하였으며 설계에 유용하게 쓰일 것으로 판단된다. 본 연구에서 수행된 계산결과에 따르면 상대간격비가 작은 경우는 말뚝캡에 작용하는 하중을 통해 계산되는 아칭효율이 설계를 지배하게 됨을 알 수 있으며 상대간격비가 커질수록 아치의 천정부파괴에 의한 아칭효율이 설계를 지배함을 알 수 있다. 말뚝중심간 설치간격에 대한 말뚝지름의 비를 나타내는 ${\beta}$값이 커질수록 말뚝 캡에 작용하는 하중에 의해 계산되는 아칭효율이 설계를 지배하게 되는 임계 상대간격비가 작아짐을 알 수 있었는데 ${\beta}$값이 0.5인 경우 임계 상대간격비는 0.35이며 ${\beta}$값이 0.2인 경우 임계 상대간격비는 0.85이었다. 계산결과에 따르면 Rankine 수동토압계수($K_p$)가 클수록 임계 상대간격비는 작아져서 $K_p$가 5인 경우 임계 상대간격비는 0.23이었으며 $K_p$가 2인 경우 임계 상대간격비는 0.85이었다. 말뚝캡이 성토지반에 대해 차지하는 면적비가 9%인 경우 아칭효율은 54%이었으며 성토재의 수동토압계수가 3인 경우 아칭효율은 61%이었는데 두 경우 모두 말뚝캡에 작용하는 하중에 의해 계산되는 아칭효율이 지배하는 상대간격비가 0.5보다 큼을 알 수 있어 실제적인 설계에 적용될 수 있음을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1287-1294
• /
• 2005

이 논문은 자유단이 스프링으로 지지되고 자유단 집중질량을 갖는 Beck 기둥의 안정성 해석에 관한 연구이다. Bernoulli-Euler보 이론을 이용하여 경사종동력을 받는 Beck 기둥의 자유진동을 지배하는 미분방정식과 경계조건을 유도하였다. 이 미분방정식을 수치해석하여 하중-고유진동수 곡선을 얻고 이로부터 발산임계하중 및 동요임계하중을 산출하였다. 수치해석의 결과로부터 경사변수, 집중질량 및 스프링 강성이 임계하중에 미치는 영향을 고찰하였다.