• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.14-16
• /
• 2015

Due to the considerable development of the technology of second generation high-temperature superconductors and a significant improvement in their mechanical and transport properties in the last few years it is possible to use HTS tapes in the magnetic levitation systems. The advantages of tapes on a metal substrate as compared with bulk YBCO material primarily in the strength, and the possibility of optimizing the convenience of manufacturing elements of levitation systems. In the present report presents the results of the magnetic levitation force measurements between the stack of HTS tapes containing $n=2{\div}200$ of tapes $12mm{\times}12mm$ and NdFeB permanent magnet in the FC and ZFC regimes. It was found a non- linear dependence of the levitation force from the height of the array of stack in both modes: linear growth at small thickness gives way to flattening and constant at large number of tapes in the stack. Established that the levitation force of stacks comparable to that of bulk samples. The numerical calculations using finite element method showed that without the screening of the applied field the levitation force of the bulk superconductor and the layered superconductor stack with a critical current of tapes increased by the filling factor is exactly the same, and taking into account the screening force slightly different.

• Advances in concrete construction
• /
• v.6 no.1
• /
• pp.29-45
• /
• 2018

This paper investigates the effect of inclusion of glass fibers on mechanical and fracture properties of binary blend geopolymer concrete produced by using fly ash and ground granulated blast furnace slag. To study the effect of glass fibers, the mix design parameters like binder content, alkaline solution/binder ratio, sodium hydroxide concentration and aggregate grading were kept constant. Four different volume fractions (0.1%, 0.2%, 0.3% and 0.4%) and two different lengths (6 mm, 13 mm) of glass fibers were considered in the present study. Three different notch-depth ratios (0.1, 0.2, and 0.3) were considered for determining the fracture properties. The test results indicated that the addition of glass fibers improved the flexural strength, split tensile strength, fracture energy, critical stress intensity factor and critical crack mouth opening displacement of geopolymer concrete. 13 mm fibers are found to be more effective than 6 mm fibers and the optimum dosage of glass fibers was found to be 0.3% (by volume of concrete). The study shows the enormous potential of glass fiber reinforced geopolymer concrete in structural applications.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.3
• /
• pp.17-29
• /
• 2012

Delays are one of the biggest problems facing by the construction industry and they have significant financial and social impact in construction projects. The paper presents a framework of Delay Analysis System (DAS) with the aim of analysing the impact of delay factors in Libyan construction projects. The system has designed by integrating the possible delay factors, critical activities of a project using@risk simulator. A case study of building project was demonstrated to identify the impact of delays and the sensitivity of delay factor. The case study result showed that the project might be delayed by 97 to 103 days in comparison to the planned duration. The developed DAS is a tool for analysing and identify the impacts of delay factors and assist to construction manager to take necessary measure in reducing the delay impact. The paper provides a methodology for analysing the possible delay impact in a construction project and informing to construction manager in advance of the possible delay factors.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.97-104
• /
• 2015

Purpose - The distribution of agricultural products is changing due to recent shifts in environmental free trade. Specifically, the competitiveness of domestic agricultural products has weakened as a result of the Korea-China Financial Trade Agreement. Agricultural producers are faced with increasing difficulties and organized production centers are growing in importance daily. To overcome this crisis, agricultural producer organizations are vying for environment-friendly agricultural certifications, Good Agriculture Practices (GAP) and Hazard Analysis and Critical Control Point (HACCP). In particular, as consumer demand for higher safety grows, farmers are increasing their certification rates. Therefore, this certification system is expected to help strengthen the competitiveness of agricultural producer organizations. Research design/data/methodology - Organized production centers are classified by certification. A survey was conducted with 91 organizations using factor analysis and logistic regression analysis for the examination. The factor analysis results are as follows. Raw material procurement, education·specialization, marketing, joint business, organizing ability, business management, effectiveness, certification, and larger organizations were classified as the nine types of factors. These factors affect the organized production centers and are used in the logistic regression analysis. The purpose of such research and analysis is to suggest a direction for future production center policies. Results - The basic statistical results are as follows: analysis of the producer organizations of 91 sites, average number of members per site of 1,624, and average sales of 25,961 million won. Additionally, the average income per farmer is 175 million won, and the pooling system rate is 53.5%. The factor analysis results are as follows. Factor 1 consists of contract cultivation, ongoing shipment, selection subdivision, traceability, and major retailer management. Factor 2 consists of manual cultivation, specialty selection, education program, and R&D. Factor 3 consists of advertising, various dealers, various sales strategies, and a unified sales counter. Factor 4 consists of agricultural materials co-purchase, policy support, co-shipment, and incentives. Factor 5 consists of the co-selection and pooling system. Factor 6 consists of co-branding and operating by the organization's article. Factor 7 consists of the buy-sell ratio and rate of operation of the agriculture promotion center. Factor 8 consists of bargaining power in volume and participation rate of farmer certification. Factor 9 consists of increasing new subscribers. The logistic regression analysis results are as follows. Considering the results by type of certification, the environment-friendly agricultural certification type and the GAP certification type have a (+) influence. GAP and HACCP certification types affecting the education·specialization factor have a (+) influence. Considering the results for each type of certification, the environment-friendly agricultural certification types on the effectiveness factor have (-) influence; the HACCP certification types on the organizing ability and effectiveness factor have a (-) influence. Conclusions - Agricultural producer organizations should develop plans as follows: The organizations need to secure education for agricultural production; increase the pooling system ratio for sustainable organizational development; and, finally, expand the number of agricultural producer organizations.

• Earthquakes and Structures
• /
• v.12 no.5
• /
• pp.529-541
• /
• 2017

According to the definition, progressive collapse could occur due to the initial partial failure of the structural members which by spreading to the adjacent members, could result in partial or overall collapse of the structure. Up to now, most researchers have investigated the progressive collapse due to explosion, fire or impact loads. But new research has shown that the seismic load could also be a factor for initiation of the progressive collapse. In this research, the progressive collapse capacity for the 5 and 15-story steel special moment resisting frames using push-down nonlinear static analysis, and nonlinear dynamic analysis under the gravity loads specified in the GSA Guidelines, were studied. After identifying the critical members, in order to investigate the seismic progressive collapse, the 5-story steel special moment resisting frame was analyzed by the nonlinear time history analysis under the effect of earthquakes with different characteristics. In order to account for the initial damage, one of the critical columns was weakened at the initiation of the earthquake or its Peak Ground Acceleration (PGA). The results of progressive collapse analyses showed that the potential of progressive collapse is considerably dependent upon location of the removed column and the number of stories, also the results of seismic progressive collapse showed that the dynamic response of column removal under the seismic load is completely dependent on earthquake characteristics like Arias intensity, PGA and earthquake frequency contents.

• Journal of Korean Critical Care Nursing
• /
• v.8 no.1
• /
• pp.50-61
• /
• 2015

Purpose: The purpose of this study was to develop a valid tool for measuring the work environment of Korean nurses and test the validity and reliability of the instrument. Methods: This is a methodological study for developing and testing a measurement tool. The conceptual framework for the tool was formed through a literature review and in-depth interviews with clinical nurses. 260 meaningful statements were derived through this process, and 59 of the primary items were generated out of these statements. On the basis of the content validity test, 41 items were selected for the preliminary tool. A total of 350 nurses from 7 hospitals responded to the preliminary questionnaire in October 2011. Results: After the item analysis and the principal component analysis using varimax rotation methods, 11 items were deleted. Considering the conceptual framework and the scree plot, we extracted 4 factors from the final 30 items. These factors were organizational support, head nurse's leadership, support system, and relationship with coworkers, and their total variance was 54.4%. The value of Cronbach's ${\alpha}$ of the final tool was 0.92. Conclusion: The above findings revealed that the Korean Nursing Work Environment Scale (K-NWES) is an appropriate, valid, and reliable tool for evaluating the work environment of Korean nurses. Further research to perform a criterion validity test of the K-NWES is needed.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.135-141
• /
• 1998

The objective of this study is to examine the specific progress in modern architecture with a premise that structure-oriented paradigm, as a primary factor, exerts a strong impacts on 18th and 19th centuries architecture. For this purpose, the concept and meaning backgrounds of structure-oriented paradigm have been checked also intrinsic thought s and critical aspects of modern architecture with the light of structure-oriented paradigm have been studied, This study summarized as follows: 1) The concept of structure-oriented paradigm in accordance with ideologies and technologies is framework of through which is shared as collective consciousness. 2) The backdrops of this consciousness are scientific methodologies stemmed from Renaissance and Enlightenment spiritual absoluteness claimed by German Idealists developed structural engineering with newly introduced material like iron steel and reinforced concrete. 3) The intrinsic through in architectural theories are rational and technological idelolgies which is derived from the backdrops of structure-oriented paradigm. 4)The critical sapects of modern architecture in structure-oriented paradigm point of view are $\circled1$ material alteration and directive imitation of vocabularies in classical architecture with simply using newly introduced building material and structure systems $\circled2$ morphological substitution with abstractly interpreted materials and structure systems $\circled3$ revolutionary conversion into engineering architecture through maximum consideration in compliance with tectonics capabilities

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.65-71
• /
• 2015

This paper presents the efficiency analysis of a critical current mode interleaved PFC rectifier, in which each of three different semiconductor switches is employed as the active switch. The Si FET, SiC FET, and GaN FET are consecutively used with the prototype PFC rectifier, and the efficiency of the PFC rectifier with each different semiconductor switch is analyzed. An equivalent circuit model of the PFC rectifier, which incorporates all the internal losses of the PFC rectifier, is developed. The rms values of the current waveforms main circuit components are calculated. By adapting the rms current waveforms to the equivalent model, all the losses are broken down and individually analyzed to assess the conduction loss, switching loss, and magnetic loss in the PFC rectifier. This study revealed that the GaN FET offers the highest overall efficiency with the least loss among the three switching devices. The GaN FET yields 96% efficiency at 90 V input and 97.6% efficiency at 240 V, under full load condition. This paper also confirmed that the efficiency of the three switching devices largely depends on the turn-on resistance and parasitic capacitance of the respective switching devices.

• Journal of Korean Critical Care Nursing
• /
• v.8 no.1
• /
• pp.41-49
• /
• 2015

Purpose: The purpose of this study was to measure the noise levels in intensive care units (ICUs) and to analyze the causes of the noise and patient perceptions of the noise. Methods: Noise levels were recorded in adult ICUs for 24 h over a week from the patients' bedside with a sound level meter. Noise sources were categorized into three groups: medical equipment, health care providers, and the environment. Noises from the environment were recorded in an empty ICUs side room. Perceptions of the noise of 125 patients admitted to the ICUs were recorded using a questionnaire. Results: The mean level of noise in the ICUs was 58.5 dBA (range: 34.2-80.2 dBA). The causes of noise higher than 70 dBA were nebulizers and infusion/syringe pumps among medical equipment, and drawer slamming, phone ringing, and stripping packages of medical fluids among environmental noises. According to the questionnaire, 64.0% of the patients responded that the ICUs were noisy and that they suffered from sleep disturbance because of the noise. Conclusion: Noise is considerably high in ICUs and is an annoying factor for the patients. Most noise sources are adjustable, and we should try to reduce noise whenever possible to make the ICUs environment more pleasant.

• Journal of Korean Critical Care Nursing
• /
• v.12 no.1
• /
• pp.36-45
• /
• 2019

Purpose : The purpose of this study was to identify status and characteristics of patients who have been readmitted to ICU, and to analyze risk factors associated with the readmission to ICU within 48hours. Method: Data were collected from patient's electronic medical reports from one hospital in B city. Participants were 2,937 patients aged 18 years old or older admitted to the ICU. Data were analyzed using odd ratios (ORs) from multivariate logistic regressions. Results: 2.2% of the 2,937 patients were early readmitted to ICU. Risk factors for early readmission to ICU were existence of respiratory disease, use of mechanical ventilator, and duration of hospitalization (longer). Conclusion: The assessment on the respiratory system of the patient who will be discharged from the ICU was identified as an important nursing activity. Therefore, the respiratory system management and education should be actively conducted. In addition, early ICU readmission may be prevented and decreased if a link was built to share the information on patient condition between the ICU and general wards.