• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.31-42
• /
• 2001

In this study, we obtained fundamental data about Korean raw lacquer's physical and chemical properties to produce high quality lacquer. The tested raw lacquers were obtained from Won-ju in Korea, Shanxishang, Guizhoushang, Anhuishang in China. The drying time of refining lacquers, tensile strengths of dried films and uniformity of films are measured. The refined lacquers were prepared by experimentally scaled refining equipment. Films of lacquer were applied on glasses by film applicator. This films were tested by universal strength test machine. The films were pictured by scanning electron microscopy and confocal microscopy to define the uniformity of them. The refining method were not different among three different kind of raw lacquers which were different their collecting time and places. But the viscosity of them were quite different. When black refined lacquer is made with iron powder, the adding time of iron powder is critical to control the viscosity of it. The refining times, viscosity and tensile strength of refined lacquers were not depended the method of refining condition but the place of collecting of raw lacquer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.50-60
• /
• 2018

In this paper, we developed a broadband multi-layered radome applicable for high-power applications. In this regard, we presented the wave propagation characteristics of the broadband multi-layered radome with the ABCD matrix and obtained the optimal thickness and the material constant for each layer by an optimization algorithm called "particle swarm optimization," implemented by a commercial numerical modeling tool. Further, we redesigned it in view of mechanical properties to reflect environmental conditions such as wind, snow, and ice. The power transmission property was reanalyzed based on the recalculated data of each layer's thickness to consider the limitations of the fabrication of a large structure. Under the condition of a peak electric field strength that is 10 dB above the critical electric field strength in air breakdown, we analyzed the air breakdown by radio frequency(RF) in the designed radome using the commercial full-wave electromagnetic tool. The radome was manufactured and tested by continuous wave(CW) RF small signal and large signal in an anechoic chamber. The test results showed good agreement with those attained by simulation.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.7
• /
• pp.231-266
• /
• 1997

TQM is a whole process of systemizing, documenting and measuring of service quality scientifically to achieve zero defects in product quality and to continue to improve the body of the product quality by itself. To have this process be improved continuously, first of all it needs to prepare an ideal environment to understand and to conform to its internal and external customers', that is every guests' and employees' expectations and demands. Then it has to be followed by the next step removing some negative aspects that could be derived from the first mentioned process The third step is to cut the cost be suitable compensation rather than an attitude trying to solve the problems in an easy way. The last essential factor for setting up TQM system is to make good use of the outstanding feature or process as it is reviewed against the superior benchmark. The purpose of this study is meet the customers' expectations and to maximize the hotel's profits by searching TQM(total quality management) strategy in hotels. To attain this research's objective, it follows these three details. Firstly, it defines TQM and its contents. Secondly, it provides the standard of hotel TQM throughout some case studies. Thirdly, it suggests TQM strategic plan in tourism hotel as one of professional management strategies. Two useful methods are used together to achieve the goal of this study. To confirm its theoretical consideration, descriptive studies by the research documents its theoretical consideration, descriptive studies by the research documents published in and out of the country is used. The other is case studies of TQM execution in real hospitality industry, which present the cases of the airline, Jefferson Memorial and the hotel. This research is targeting to demonstrate the successful TQM's exercise in a hotel industry by completing the theoretical studies and case studies on service product quality with an understanding of its importance. As it is said earlier, to lead to the successful TQM's practice, it is necessary to maintain a constant training of the employees. Secondly, it also must identify where it has to focus on to deliver a professional quality management. Thirdly, effective quality management organization needs to be build up. The manager's strong will to accomplish and the employee' active participations are the last condition to be succeed. Once again this study places an emphasis on the fact that TQM is critical to maximize the customers' satisfaction and the hotel's profitability. It is also very worthwhile to have every people working on front line recognize why the TQM is important and further more how they can contribute to improve their service quality by a positive participation and a careful observation of TQM's operating in their property.

• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.39-47
• /
• 2000

In Stereotactic Radiosurgery (SRS), there are three imaging methods of target localization, such as digital subtraction Angiography (DSA), computed tomography (CT), magnetic resonance imaging (MRI). Especially, DSA and MR images have a distortion effect generated by each modality. In this research, image properties of DSA were studied. A first essential condition in SRS is an accurate information of target locations, since high dose used to treat a patient may give a complication on critical organ and normal tissue. Hut previous localization program did not consider distortion effect which was caused by image intensifier (II) of DSA. A neurosurgeon could not have an accurate information of target locations to operate a patient. In this research, through distortion correction, we tried to calculate accurate target locations. We made a grid phantom to correct distortion, and a target phantom to evaluate localization algorithm. The grid phantom was set on the front of II, and DSA images were obtained. Distortion correction methods consist of two parts: 1. Bilinear transform for geometrical correction and bilinear interpolation for gray level correction. 2. Automatic detection method for calculating locations of grid crosses, fiducial markers, and target balls. Distortion was corrected by applying bilinear transform and bilinear interpolation to anterior-posterior and left-right image, and locations of target and fiducial markers were calculated by the program developed in this study. Localization errors were estimated by comparing target locations calculated in DSA images with absolute locations of target phantom. In the result, the error in average with and without distortion correction is $\pm$0.34 mm and $\pm$0.41 mm respectively. In conclusion, it could be verified that our localization algorithm has an improved accuracy and acceptability to patient treatment.

• Childhood Kidney Diseases
• /
• v.9 no.2
• /
• pp.119-127
• /
• 2005

Purpose : Podocytes are critical in maintaining the filtration barrier of the glomerulus and are dependent on the integrity of slit diaphragm(SD) proteins including nephrin, p-cadherin, and others. Diabetic proteinuric condition demonstrates defects in SD molecules as well as ultrastructural changes in podocytes. We examined the molecular basis for this alteration of SD molecules especially on P-cadherin as a candidate regulating the modulation of pathogenic changes in the barrier to protein filtration. Methods : To investigate whether high glucose and AGE induce changes in SD, we cultured rat GEpC under normal(5 mM) or high glucose(30 mM) and AGE- or BSA-added conditions and measured the change of P-cadherin expression by Western blotting and RT-PCR. Results : We found that administration of high glucose decreased the P-cadherin production significantly in the presence or absence of AGE by Western blotting. In RT-PCR high glucose with or without AGE also significantly decreased the expression of P-cadherin mRNA compared to those of controls. Such changes were not seen in the osmotic control. Conclusion : We suggest that high glucose with or without AGE suppresses the Production of P-cadherin at the transcriptional level and that these changes nay explain the functional changes of SD in diabetic conditions. (J Korean Soc Pediatr Nephrol 2005;9:119-127)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.585-592
• /
• 2017

Most sewer lines buried in the city are likely to be collapsed due to serious aging. Also, due to the high concentration of development and high population density and traffic, the collapse of the sewer will cause enormous social and economic damage. Therefore, proactive maintenance is required to prevent accidents caused by deteriorated sewer pipe. In order to utilize limited budget effectively, risk-based prioritization methods should be proposed that simultaneously consider the consequence of failure and the probability of failure. In this study, the method of risk-based prioritization of sewer was examined by reviewing various cases of overseas studies and applied to the urban sub-catchment. First, the impact factors that can be secured through the sewer GIS DB in Seoul were derived, and the weight, sub-criteria, and impact score of each impact factor were determined and the consequence of failure was calculated by weight sum method. In addition, the probability of failure was calculated by dividing the service life by the estimated useful life, and the consequence of failure and the probability of failure were classified into five grades by the Jenks natural breaks classification method. The prioritization method was applied to sub-catchment in the Seoul to derive a risk matrix and a risk grade. As a result, 26% of all subjects were selected as the inspection priority subjects with 4-5 risk grade. Therefore, using the risk-based CCTV prioritization methodology, it will be possible to systematically determine the objects that need investigation first.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.447-453
• /
• 1986

Germination and seedling elongation of soybeans [cult. ‘Williams’] were measured at two temperatures (15 and 3$0^{\circ}C$), three seed water contents (30, 50, and 70%), and with and without polyethylene glycol-8000 (PEG) treatments. A split-plot design was used with four replications. Observations were made from two hours to eight days for each treatment combination. Seeds were soaked with 30% PEG solution with 0.2% thiram at 15 C for six days, rinsed with deionized water and dried at 25.5$^{\circ}C$ for three days. Ten treated or untreated seeds were placed on Whatman No. I (9 cm) filter paper in plastic petridishes to which sufficient deionized water was added to adjust seed moisture content to the desired level. The dishes were then sealed with parafilm and placed in a continuous programmed temperature chamber under dark condition. Seedling growth did not occur at either temperature when moisture content was 50 percent or less. Osmo-conditioning with PEG showed positive effects on seedling moisture uptake and seedling growth at 15$^{\circ}C$ but little effect at 3$0^{\circ}C$. Seedling moisture content increased rapidly early in the germination period and reached 60% at 15 C for 56 hours and at 3$0^{\circ}C$ for 28 hours. Seedling growth started when seed moisture reached a critical point of 60% at 15$^{\circ}C$, however, growth started after 20 hours of germination at 3$0^{\circ}C$. Seedlings of soybeans elongated more than four times faster at 3$0^{\circ}C$ than at 15$^{\circ}C$. Water uptake during germination was characterized by two phases in this experiment.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.531-544
• /
• 2009

In the past, objective usability was one of the most important aspects when user used system. But nowadays user's subjective experiences are getting more critical element than objective usability in HCI(human-computer interaction). Most people own their mobile phone and use it frequently these days. It is especially important to make user's subjective experiences more positive when using devices like mobile phones people frequently carry and interact with. This study investigates whether the interfaces which express the emotion give more positive experiences to users. Researchers created mobile phone prototypes to compare the effect of mechanical melody feedback(the major auditory feedbacks on mobile phones) and emotional voice feedback(recorded human voice). Participants experienced four kinds of mobile phone prototypes(no feedback, mechanical melody feedback, emotional voice feedback and dual feedback) and evaluated their experienced usability, hedonic quality and preference. The result suggests that person's perceptional fun and hedonic quality were getting increased in the phone which gave the emotional voice feedback than the mechanical melody feedback. Nevertheless, the preference was evaluated lower in the emotional voice feedback condition than the others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.16-23
• /
• 2018

Alternative technologies for sludge treatment and disposal need to be developed urgently because the amount of produced production has increased continuously. In this study, Pulsed Electric Fields (PEF) technique was applied for sludge solubilization and the performance was evaluated. The PEF equipped with electrodes coated by epoxy resin and teflon was inducted to the activated sludge suspension, and the effect of the coating materials on the solubilization was determined. In addition, the effect of the applied voltage on the solubilization yield was investigated as the applied voltage was increased from 6 to 12 and 15 kV. Sludge solubilization was not observed when the epoxy-coated electrode was used for PEF induction regardless of the applied voltage. However, sludge solubilization occurred when 12 and 15 kV were applied to the teflon-coated electrodes. The MLSS decreased to 9%, and the soluble-COD increased to 496% when the applied voltage was 15 kV. But sludge solubilization did not happen under 6 kV condition. The corona discharge was observed at applied voltages of 12 and 15 kV, (Ed- sorry but I cannot understand the following highlight) but if 6 kV, strongly indicating that the corona discharge make the sludge solubilized, which suggests that the critical voltage for sludge solubilization lies between 6 and 12 kV. Consequently, proper selection of electrode-coating materials and the applied voltage of PEF could lead to sludge solubilization by corona discharge.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.4
• /
• pp.169-179
• /
• 2017

This study was conducted to supply information that can be utilized as data for desalination plant construction in the future by estimating unit cost of water production in the potential site of Incheon, Daesan, Yeosu, Busan, Ulsan and Sokcho in Korea. The production costs in Sokcho and Ulsan were similar to those of Busan and Yeosu. Those four sites showed better economic range due to low construction cost for intake facility compared to Incheon and Daesan. Although the salinity measured in the above 6 sites did not show perceptible effect on the production cost, the difference of seasonal seawater temperature needs to be considered due to the change of flux in reverse osmosis (RO) membrane. It turned out that the most critical parameters are the amortization in a year by the analysis of life cycle and the capacity of plant. Incheon and Daesan showed the difference of production cost up to 29% at the condition of amortization in 25 year, and up to 22% depending on plant capacity. However, the production cost in this study did not take into account of other indirect costs, therefore, this should be considered as the minimum cost.