• 지질공학
• /
• 제30권3호
• /
• pp.327-345
• /
• 2020

본 연구는 제주도에서 각종 개발과정 중 발생되는 지반진동이 용암동굴에 미치는 영향에 대해 분석하고, 용암동굴의 효율적인 관리보존 대책을 마련하기 위해 수행되었다. 이를 위해 제주도 거문오름동굴계분포지역에서 암질별 RMR과 Q-system 암반분류를 통해 지반상태를 평가하였고, 시추공 내에서 발파를 수행하여 만장굴 및 용천동굴에서 진동속도를 측정하였다. 암반분류 결과와 진동속도를 분석한 결과 암질이 좋을수록 진동의 영향이 크고, 암질이 불량할수록 진동영향이 작게 나타나는 경향을 보였으나 지반불균질성 등의 이유로 선형관계가 뚜렷하게 나타나진 않았다. 진동시험 결과를 토대로 진동속도(PPV)와 진동레벨(dB(V))의 상관관계식을 도출하였으며, 생활진동규제기준(진동레벨 주간 65 dB(V), 야간 60 dB(V))을 만족하려면 진동속도가 주간 0.371 cm/s, 야간 0.285 cm/s인 것으로 계산된다. 야간 진동기준이 더 보수적인 값이므로 허용진동기준은 0.285 cm/s 이하로 설정될 필요가 있다. 연구지역에서의 발파진동추정식 결정을 위하여 자승근 환산거리 및 삼승근 환산거리에 대해 선형 회귀분석을 수행한 결과, 결정계수(R²)가 0.76 이상으로 나타나 양호한 신뢰성을 가지는 것으로 평가되었다. 도출된 발파진동추정식의 자승근 관계식을 적용하여 문화재 진동기준치인 0.2 cm/s를 만족하는 장약량을 산정하였고, 동굴에서 50 m 이격된 경우 2.88 kg, 100 m 이격된 경우 11.52 kg으로 계산되었다.

• 소음진동
• /
• 제8권4호
• /
• pp.632-642
• /
• 1998

A method based on finite element discretization is developed for optimizing the polarization profile of PVDF film to create the modal transducer for specific modes. Using this concept, one can design the modal transducer in two-dimensional structure having arbitrary geometry and boundary conditions. As a practical means for implementing this polarization profile without repoling the PVDF film the polarization profile is approximated by optimizing electrode patterns, lamination angles, and poling directions of the multi-layered PVDF transducer. This corresponds to the approximation of a continuous function using discrete values. The electrode pattern of each PVDF layer is optimized by deciding the electrode of each finite element to be used or not. Genetic algorithm, suitable for discrete problems, is used as an optimization scheme. For the optimization of each layers lamination angle, the continuous lamination angle is encoded into discrete value using binary 5 bit string. For the experimental demonstration, a modal sensor for first and second modes of cantilevered composite plate is designed using two layers of PVDF films. The actuator is designed based on the criterion of minimizing the system energy in the control modes under a given initial condition. Experimental results show that the signals from residual modes are successfully reduced using the optimized multi-layered PVDF sensor. Using discrete LQG control law, the modal peaks of first and second modes are reduced in the amount of 12 dB and 4 dB, resepctively.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.265-271
• /
• 1999

In the feed drive systems or the spindle systems of machine tools that consist of many mechanical components, a torsional vibration is often generated because of its elastic elements in torque transmission-Generally, the accuracy of motion control system is strongly influenced by the dynamic behavior of coupled transmission components Especially, a torsional vibration caused by the elasticity of mechanical elements might deteriorate the quick movement of system and lead to shorten the life time of the mechanical transmission elements. So, it is necessary to analyze the electromechanical system mathematically to optimize the dynamic characteristics of the feed m1d spindle system. In this paper, based on the DC motor model, a model of electro-drive system with motor has been developed and an optimal criterion for tuning the gain of speed controller is discussed. The frequency bandwidth of the system and the damping ratio in time domain are optimal design specifications for the gain adjustment speed controller. The gains of PI speed controller are then derived from the bandwidth and damping ratio, and those relationships have been classified.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.159-168
• /
• 1999

In seismic analysis, there are two main ways - uniform load method and dynamic analysis, dynamic analysis can be divided into response spectrum analysis and time history analysis. In case of which get the complexion of the vibration with 3-axis of coordinate direction in each mode of free vibration mode happened owing to complication of the shape, 3-dimensional dynamic analysis is recommended to perform as multi-mode spectral analysis in standard specification for highway bridge. The purpose of this study is to understand the dynamic behavior by performing multi-mode seismic analysis according to responses analysis and time history anal)'sis in using record of earthquake. In accordance with the criterion of seismic design as defined in standard specification for highway bridge by using modified records of the El Centre and Coyote Lake earthquake, response spectrum was constructed by using the tripartite logarithmic plot. The 3-span continuous space truss bridge was selected as model of numerical analysis. As the result performed time history analysis and analysis of response spectrum for the model of numerical analysis, the result of time history analysis was slightly larger than that of response spectrum analysis. This coincide with the tendency of the result came from the analysis when using a jagged response spectrum analysis, This coincide with the tendency of the result came from the analysis when using a jagged response spectrum for a single excitation. In the Process of performing these two analysis. response spectrum analysis is more effective than time history analysis in saving times in analyzing data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1752-1761
• /
• 2000

This paper describes the far-field estimation using the near-field measurement data. Measurement in far-field region gives us the acoustical characteristics of the source but in general measurement is made in near-field such as acoustic water tank or anechoic chamber, so far-field acoustical characteristics of the source should be predicted from near-field data. In this case, the number of measurement points in the near field which relates to the accuracy of the predicted field and the amount of data processing, should be optimized. Existing papers say that measurement points is proportional to kL and depends on geometry and directivity of the source. But they do not give us any definite criterion for the required number of measurement points. Boundary Collocation Method which is one of the far-field prediction methods, is analyzed based on Helmholtz integral equation and Green function and it has been found that the number of measurement points is optimized as 0.54kL which is about one half of the existing results.

• 화약ㆍ발파
• /
• 제22권3호
• /
• pp.13-26
• /
• 2004

본 연구는 건설현장에서 매설관의 경계조건에 따른 동적 거동에 대한 진동안전기준에 관한 연구이다. 경계조건은 양단자유이며, 축방향 및 축직각방향에 대한 거동을 조사하였다. 매설관은 탄성기초 위에 놓인 보요소로 모형화하였고, 지진파는 정현파 형태의 지반 변위로 적용하였다. 매설관의 고유진동수와 모드 형태 그리고 매개변수의 영향을 조사하기 위해 자유진동에 대한 해석을 수행하였다. 그리고 지진파에 대한 거동을 조사하기 위해 자유진동 해석을 통해 얻어진 고유진동수와 모드 형태를 이용하여 진동에 대한 수식을 유도하였으며, 진동안전기준치 5 cm/sec에 안전하였고 양단자유의 매설관에 대한 자유진동 및 강제진동시의 시간-변위곡선을 나타내기 위한 전산프로그램을 완성하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1614-1627
• /
• 2016

The purpose of this paper is to investigate the united Electromagnetic characteristics for the effective monitoring on the static air-gap eccentricity (SAGE) of turbo-generator. Different from other studies, this paper not only studies on the unbalanced magnetic pull (UMP) and the vibration characteristics of the stator and the rotor, but also investigates the harmonic features of the magnetic flux density and the circulating current inside the parallel branches (CCPB). The theoretical calculation, together with the finite-element-method (FEM) simulation and the experiment verification, is taken for a SDF-9 type non-salient generator. It is shown that, when SAGE occurs, apparent double-frequency UMP and vibrations will be produced both on the stator and the rotor, while the CCPB will have an obvious increment at the $1^{st}$ harmonic component. In addition, the amplitude of the magnetic flux density will be of cosine distribution in the circumferential position of the air-gap, while in normal condition it is a constant. Moreover, the pass-band amplitude, together with the $1^{st}$ harmonic of the magnetic flux density, will be enlarged as well. These united electromagnetic characteristics can be used as the diagnosis and monitoring criterion for SAGE.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.72-79
• /
• 2017

A full treatment of damping material is not an effective method because the damping effect is not significantly increased compared to that obtained by an effective partial damping treatment. Thus, a variety of methodologies has been considered in order to achieve an optimal damping treatment. One of the widely applied approaches is topology optimization. However, the high computational expenses can be an issue in topology optimization. A new efficient convergence criterion, reducible design variable method (RDVM), is applied to reduce computational expense in topology optimization. The idea of RDVM topology optimization is to adaptively reduce the number of design variables based on the history. The iteration repeats until the number of design variables becomes zero. The aim of this research is to adopt RDVM topology optimization into obtaining an optimal damping treatment. In order to demonstrate the effectiveness and efficiency of RDVM topology optimization, optimal damping layouts and computational expenses are compared between conventional and RDVM topology optimization.

• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.523-539
• /
• 2016

The ambient vibration measurement is an output-data-only dynamic testing where natural excitations are represented, for instance, by winds and typhoons. The modal identification involving output-only measurements requires the use of specific modal identification techniques. This paper presents the application of a reliable method (the Stochastic Subspace Identification - SSI) implemented in a general purpose software. As a criterion toward the robustness of identified modes, a bio-inspired optimization algorithm, with a highly nonlinear objective function, is introduced in order to find the optimal deployment of a reduced number of sensors across a large civil engineering structure for the validation of its modal identification. The Ting Kau Bridge (TKB), one of the longest cable-stayed bridges situated in Hong Kong, is chosen as a case study. The results show that the proposed method catches eigenvalues and eigenvectors even for a reduced number of sensors, without any significant loss of accuracy.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.629-634
• /
• 2000

Generally, the accuracy of motion control systems is strongly influenced by both the mechanical characteristics and servo characteristics of feed drive systems. In the fed drive systems of machine tools that consist of mechanical parts and electrical parts, a torsional vibration is often generated because of its elastic elements in torque transmission. Especially, a torsional vibration caused by the elasticity of mechanical elements might deteriorate the quick movement of system and lead to shorten the life time of the mechanical transmission elements. So it is necessary to analyze the electromechanical system mathematically to optimize the dynamic characteristics of the feed drive system. In this paper, based on the simplifies feed drive system model, radius errors due to position gain mismatch and servo response characteristic have been developed and an optimal criterion for tuning the gain of speed controller is discussed. The proportional and integral parameter gain of the feed drive controller are optimal design variables for the gain tuning of PI speed controller. Through the optimization problem formulation, both proportional and integral parameter are optimally tuned so as to compensate the radius errors by using the genetic algorithm. As a result, higher performance on circular profile tests has been achieved than the one with standard parameters.