• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.37-41
• /
• 2018

Recently, interest in the safety and maintenance of the structures is growing. However, due to the low-cost order placed by the ordering organization, the safety diagnosis specialized institution becomes insolvent and many problems have arisen due to insufficient inspection and diagnosis. Therefore, in this study, the current status of bid cost was examined through the survey of the practitioners and case analysis. As a result, Precision safety inspection is deemed that it is necessary to increase the efficiency of the criteria cost and to strengthen the rigidity of the criteria cost rather than adjusting the criteria cost. Precision safety diagnosis, the criteria cost for structures with a floor area of less than $10,000m^2$ is lowered to 80 % from the current standard. For structures larger than that, the current criteria cost are applied, but it is deemed necessary to strengthen the rigidity of the criteria cost.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.1
• /
• pp.62-69
• /
• 2005

The optimal design of transmission system expansion planning is an important part of the overall planning task of electric power system under competitive electricity market environments. One of main keys of the successful grid expansion planning comes from optimal reliability level/criteria decision, which should be given for constraint in the optimal expansion problem. However, it's very difficult to decide logically the optimal reliability criteria of a transmission system as well as generation system expansion planning in a society. This paper approaches a methodology for deciding the optimal reliability criteria for an optimal transmission system expansion planning. A deterministic reliability criteria, BRR (Bus Reserve Rate) is used in this study. The optimal reliability criteria, BRR/sup */, is decided at minimum cost point of total cost curve which is the sum of the utility cost associated with construction cost and the customer outage cost associated with supply interruptions for load considering bus reserve rate at load buses in long term forecasting. The characteristics and effectiveness of this methodology are illustrated by the case study using IEEE-RTS.

• Journal of the Korean Dietetic Association
• /
• v.8 no.4
• /
• pp.372-386
• /
• 2002

The purposes of this study were to find factor which influence on the selection criteria of food supplier. Questionnaire were distributed to 52 general hospitals with more than 400 beds located in Seoul and Kyongin province, and responded questionnaires were collected from 44 dietetic departments (84.6%) and 18 purchasing departments (34.6%). The main results of this study can be summarized as follows: (1) supplier selection criteria include quality, service, cost and supplier competency. (2) With having been met with tight competition and market opening, hospitals plan a strategy to improve quality, service and they tend to have more interest in various supplier selection criteria. (3) Purchasing departments estimate more highly the rate of reflection in considering supplier selection criteria than the rate of importance about cost criteria, which reveals that purchasing departments sensitively respond to cost cutdown. (4) When selecting suppliers, a significant(p<.01) influence of stability of supplier industry environment on the selecting criteria such as the importances of quality, service, and supplier quality are recognized only after recognizing the stability of food delivery industry. Food supplier industry secures stability more quickly through major companies' participation in food distribution industry and this will reveal the importance of supplier selection criteria. (5) Suppliers which are selected by the quality criteria, service criteria, supplier quality criteria make efforts to communicate with foodservice departments, to give more proper information about substitute food, new product, and to make commitments, while suppliers which are decided by cost criteria do not establish supportive relationships with foodservice departments.

• The Korean Journal of Applied Statistics
• /
• v.27 no.5
• /
• pp.773-786
• /
• 2014

We propose the multiplication of false rates (MFR) which is a classification accuracy criteria and an area type of rectangle from ROC curve. Optimal threshold obtained using MFR is compared with other criteria in terms of classification performance. Their optimal thresholds for various distribution functions are also found; consequently, some properties and advantages of MFR are discussed by comparing FNR and FPR corresponding to optimal thresholds. Based on general cost function, cost ratios of optimal thresholds are computed using various classification criteria. The cost ratios for cost curves are observed so that the advantages of MFR are explored. Furthermore, the de nition of MFR is extended to multi-dimensional ROC analysis and the relations of classification criteria are also discussed.

• Journal of Advanced Engineering and Technology
• /
• v.11 no.4
• /
• pp.287-294
• /
• 2018

Since its introduction in Korea, design VE has widely been used as a means to enhance values in the construction industry. However, a greater emphasis is still placed on cost reduction in approach attitudes and performance evaluations on the implementation of design VE. In this regard, this study presented a performance evaluation method for cost, function, and value of VE proposals. Numerical criteria on the increase and decrease of cost and function that can classify the value enhancement type of VE proposals were proposed based on the performance evaluation method. It is expected that the use of numerical criteria for the type classification of VE proposal, and cost and performance evaluation method proposed in this study will make it possible to conduct a clear and more intuitive evaluation of VE proposal. However, it is appropriate to use the numerical criteria as a guideline to apply the new performance evaluation method for VE proposals. Therefore, it is necessary to conduct a statistical analysis with a wider range of users after the repeated application of the findings of this study, and thus to carry out research for presenting the numerical criteria for various types of users.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.119-120
• /
• 2012

The government has offered incentives to encourage private companies that are to meet the Green Building Certification Criteria. Despite offering these incentives, the Green Building Certification Criteria record share of newly-built building in 2010 is 0.35%, very low. Effectiveness of Green Building Incentive applied by the Green Building Certification Criteria is questioned. So we attempts to analysis about effectiveness of Green Building by using Cost-Benefit Analysis. But if we want to use CBA, we need to draw cost, benefit factors that compose the incentive. So in this study, for applying CBA, we analysis cost, benefit factors.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.1
• /
• pp.113-128
• /
• 2003

Purpose : The aim of this study is to review cost analysis methodological issues in the nursing literature. Method : The subjects of this study were articles published in Korea from 1961 to August, 2002. They were searched by key words 'cost' and 'nursing' from various DB(National Assembly Library, The National Library of Korea, RICH etc). Finally, 31 articles were collected. Results : 1) The major type of cost analysis was a cost comparison study. 2) The important methodological weaknesses were as followers: First, many studies did not describe a cost analysis framework or a cost analysis assumption. Second, a few studies described selection criteria of cost items and effectiveness items. Third, many studies did not do a sensitivity analysis. Conclusion : With these results, it will be possible to develop a more proper cost analysis methodological framework and also to make an evaluation criteria for cost analysis nursing study.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.597-608
• /
• 2011

It has been often noted as a problem that as there are no objective and clear criteria for the repair cost estimate of persistent defects, when a claim arises in relation to an apartment construction, significantly different amounts of compensation may be given for similar defects based on the experience and tendencies of the construction experts asked to make a judgment. For this reason, this research aims to present defect managers with a more reasonable and objective estimation criteria and a system to determine the repair cost of defects based on an analysis of relevant factors. The research findings show that the historical cost system is applied first, and then a standard of estimation is used to estimate the cost for the items that are not included in the historical cost system. The criteria for the repair cost for each defect is as follows: the repair cost for defects arising from a regulation violation is determined by calculating the reconstruction cost of the parts in question after demolishing them; the repair cost for progressive defects is determined based on a contribution ratio proportional to the age of the building; the repair cost for repetitive defects is calculated by considering an alternative to maximize the intended function of the defective parts; and the repair cost for value depreciation defects is determined based on the ratio of the warranty period to the lapsed years. However, repair cost estimation for dual value depreciation defects should be studied in future research.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.115-122
• /
• 2011

The critical role played by manufacturing performance measurement systems in achieving competitive success is increasingly recognized. Developing an integrated performance measurement model is significant for strategic management. This study consist of several principal steps. Performance criteria from the literature and an questionnaire were utilized prior to building the performance model. The AHP(Analytic Hierarchy Process) is utilized to evaluate the weight of each criterion when generating the performance measurement model for Korea automobile parts manufacturing company. AHP analysis showed clear difference in the priority between 5 criteria and 24 sub-criteria in terms of manufacturing performance of Korean automobile parts manufacturing company. The result of priority evaluation in the 5 criteria of 2nd level was ranked quality, cost, delivery, employee, flexibility. And the critical sub-criteria in the 24 sub-criteria of 3rd level was ranked claim rate, process defect rate, outsourcing parts defect rate, ability to quality management innovation, claim cost, etc.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.4
• /
• pp.34-42
• /
• 2007

The investment of BTL(Build-Transfer-Lease) projects for the educational facilities has been increased since 2005. However, many trial errors and problems have been occurring due to the lack of inspection criteria in maintenance cost for the lift cycle of the facilities. Thus, purpose of this study is to derive regression equation for the daily inspection and the regular inspection through analysis of CAD data in order to set the inspection criteria. It is possible to calculate economical maintenance cost of BTL project in educational facilities using criteria of inspection time through the regression equation developed in this study.