• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.793-803
• /
• 2000

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically self-curing glass-ionomer cement and light-curing glass-ionomer cement as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on maxillary third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were self-curing glassionomer cement and light-curing glassionomer cement. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. Results were as follows. 1. In all experiment group, there were not epithelial down growth and glass ionomer cement were encapsulated connective tissue. 2. In 4 weeks experiment I group slighly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, experiment groups I, II were encapsulated fine connective tissue. 4. Therefore glass-ionomer cement filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances were possible clinical methods and this technique is useful method for Maxillary furcation involvement.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.803-814
• /
• 2000

Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, biological mediators. Platelet Rich Plasma have been reported as a biological mediator which regulate activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the possibility of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were PRP plus bovine bone and bovine bone only. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus bovine bone group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 4 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during early stage of periodontal tissue regeneration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.4
• /
• pp.301-311
• /
• 2002

The purpose of this study was to compare the distributing pattern of stress on the finite element models with the different vertical bone level of implant fixture. The two kinds of finite element models were designed according to vertical bone level around fixture ($4.0mm{\times}11.5mm$). The cemented crowns for mandibular first and second molars were made. Three- dimensional finite element model was created with the components of the implant and surrounding bone. Vertical loads were applied with force of 200N distributed within 0.5mm radius circle from the center of central fossa and distance 2mm and 4 mm apart from the center of central fossa. Von-Mises stresses were recorded and compared in the supporting bone, fixtures, abutment screws, and crown. The results were as following : (1) In vertical loading at the center circle of central fossa on model 1 and 2, the difference from vertical bone in implant placement did not affect the stress pattern on all components of implant except for crown. (2) With offset distance incerasing and the bone level of implant decreasing, the concentration of stress occured in the buccal side of long crown, around the buccal crestal bone, and on the fixture- abutment interface. As a conclusion, the research showed a tendency to increase the stress on the supporting bone, fixture and screw under the offset loads when the vertical level of bone around fixture was different. Since the same vertical bone bed has more benefits than the different bone bed around fixtures, it is important to prepare a same vertical level of bone bed for the success of implants under occlusal loads.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.210-221
• /
• 1998

In the period from the year 1500 to 1980. at least 14 large earthquake with epicenters in the northeastern China and Yellow Sea were felt or destructive in the Korean Peninsula. The most sigmificant events among them were the 1668 July 25 Tancheng earthquake of mamnitude 8.5, and the 1975 Feb. 4 Haicheng earthquake of magnitude 7.3. The Haicheng earthquake of the year 1975 in am extraordinary one among those occurred in the northeastern China in the 20th century in the sense the Shake of the event affected all over the Korean Peninsula. The tremor was felt even at the southeastern tip of the Korea and northern part of Kyushu 700km far away from the epicenter. In order to see the variation and trend of the effect of the Haicheng earthquake on the Korean Peninsula, the two data sets of the northern and southern parts of the peninsula were merged into one combined data set. The spatial variation of intensity shows smooth decrease from the value 4 of the northwestern region near the source to the value 1 of the Cheju Island and Kjushu. However, there are four regions of locally high intensity value. They are the region along downstream of Abrok(Yalu) River with intensity 5, the region around Shinpo of intensity 4, the area comprising Seoul and Chuncheon Cities of intensity 4, and Pohang-Pusan area of intensity 3. We suppose that there might be three types of possible mechanisms. The first one is concerned with the lateral inhomogeneity of velocity in the crust caused by wide distribution of relatively fractured rock. The second one is related with reflections of surface waves caused by the crestal thinning effect at border regions of the Peninsular in contact with the Ulleung Basin and the Japan Basin. The third possibility is local site effect caused by thick Tertiary or Quaternary rocks and soil layers.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.5
• /
• pp.444-450
• /
• 2007

In general, labiolingual or buccolingual widths of residual alveolar bone are insufficient in edentulous area, because of alveolar resorption. Horizontal augmentation is bone graft procedure with a view to reinforcing horizontally insufficient bone quantity for installation of implants. The standard method is taking appropriate amount of block bone from intraoral or extraoral autogenous bone, and solid fixation with screws or mini-plate on labial or buccal side of residual alveolar bone. The purpose of this study is to discuss clinical usefulness of horizontal augmentation with autogenous block bone by observation and analysis of course of 41 implants installed to 12 patients by horizontal augmentation in Seoul National University Bundang Hospital from July, 2002 to December, 2005. The mean age of patients is 52.7, from 19 to 70, and the number of men and women is each 2 and 10. Block bone was taken from symphysis, body, ramus of mandible or iliac bone. And 6 types of implants were installed simultaneously or not, the diameters of implants are from 3.3 to 5.5mm, the lengths are from 8 to 15mm. The operator added artificial bone grafting material and optionally covered with membrane. The mean periods of observation after operation and final prosthetics were 28.6 and 17.0 months. As a result, 40 among 41 implants survived, the survival rate was 97.6%. Average 0.9mm crestal resorption was observed at final point of time by periapical view of each patients. Major complication related to the procedure was numbness in 7 patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.6
• /
• pp.317-321
• /
• 2015

Objectives: The purpose of this study is to evaluate five-year radiographic follow-up results of the Korean sandblasting with large grit, and acid etching (SLA)-treated implant system. Materials and Methods: The subjects of the study are 54 patients who have been followed-up to date, of the patients who underwent implant surgery from May 1, 2009 to April 30, 2011. In all, 176 implant placements were performed. Radiographs were taken before the first surgery, immediately after the first and second surgeries, immediately and six months after the final prosthesis installation, and every year after that. Bone loss was evaluated by the method suggested by Romanos and Nentwig. Results: A total of 176 implant placements were performed - 122 in men and 54 in women. These patients have been followed-up for an average of 4.9 years. In terms of prosthetic appliances, there were 156 bridges and 20 single prostheses. Nine implants installed in the maxillary molar area, three in the mandibular molar area and two in the maxillary premolar area were included in group M, with bone loss less than 2 mm at the crestal aspect of the implant. Of these, eight implants were single prostheses. In all, six implants failed - four in the mandible and two in the maxilla. All of these failures occurred in single-implant cases. The implant survival rate was 98.1% on the maxilla and 94.3% on the mandible, with an overall survival of 96.6%. Conclusion: Within the limitations of this study, implants with the SLA surface have a very superior survival rate in relatively poor bone environments such as the maxilla.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.437-444
• /
• 2008

Purpose: A number of techniques and materials have been used for periodontal regeneration and bone graft procedures with guided tissue regeneration(GTR) have been suggested as alternatives to osseous surgery in the management of local infra-bony defects. However, the long-term stability and treatment outcome following bone graft procedure of infra-bony defects is poorly documented. The purpose of this study was to assess radiographic change in infra-bony defects over 2 years after bone graft procedures with various graft materials. Material and Methods: Patients attending the department of periodontics of Kyungpook National University Hospital were studied. Patients showed clinical and radiographic evidence of infra-bony defect(s). 44 sites of 34 patients aged 31 to 69 (mean age 48.3) were treated by bone graft procedure with a bone graft material. Baseline and 2-year follow-up radiographs were collected and evaluated for this study. Radiographic assessment includes a bone fill, bone crest change, defect resolution, and % of defect resolution. Pre- and post-treatment differences between variables (maxilla and mandible, defect depth, defect angle, bone graft materials) using the paired t-test were examined. Result: We observed $1.15{\pm}1.95\;mm$ of bone fill, $0.40{\pm}1.19\;mm$ of crestal resorption, $1.55{\pm}1.77\;mm$ of defect resolution, and $40{\pm}44%$ of percentage of defect resolution. Deeper initial defect depth, narrower initial defect angle showed significantly greater bone fill, defect resolution, and % of defect resolution. But no significant difference was observed in graft sites and graft materials. Conclusion: If good oral hygiene maintenance and periodic recall check of patients is assured, bone graft procedure using various graft materials is one of the appropriate treatment modality for regenerative therapy of infra-bony defects.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.521-528
• /
• 2008

Purpose: Tunneling is a periodontal surgical procedure that creates access for patient cleansing and maintenance within the furcal area of a molar tooth with severe furcation involvement. Up to date, there are few studies about a long term clinical and radiographic stability of tunneling. The purpose of this retrospective study is to evaluate the long term prognosis after tunnel preparation of molars with through and through furcation. Material and Methods: 25 teeth of 23 patients aged 36 to 70 (mean age 51.7) were treated surgically with tunnel preparation. These cases were followed for 2 to 13 years (mean 6.5years) after surgery. Patients were recalled for an evaluation which was based on a questionnaire, a clinical examination, and radiographic analysis. Clinical assessment included plaque index, caries registration, probing pocket depth, bleeding on probing, tooth mobility. Baseline and over 2-year follow-up radiographs were collected and evaluated for this study. Result: 3 teeth(12%) had been extracted and 1 tooth(4%) hemisected. Root caries was detected in 3 teeth(12%). Thus 72% of the teeth were still caries tree and in function. Clinical parameters including PI, PD, BOP, mobility showed somewhat favourable results. Radiographic furcal bone loss showed no statistically significant difference compared to interproximal crestal bone loss ($3.59{\pm}1.69%$ vs $3.42{\pm}2.95%$) when root length was used as reference. There was no correlation between root trunk length and furcal bone loss. Conclusion: Over 2 years after tunneling procedure, teeth showed a clinically and radiographically stable condition, despite of slight root caries and alveolar bone loss within clinically acceptable range. The tunnel procedure may be considered as a viable periodontal treatment option for molar teeth with severe furcation involvement in individuals following a regular maintenance program.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.151-164
• /
• 2007

Objective: The sinus floor elevation procedures have been used to facilitate implant placement in the severely atrophic posterior maxilla. Many variables may have an influence on the outcomes of the sinus floor elevation in combination with implant treatment. The aim of this study was to analyze survival rate of implants placed in the edentulous maxillae of patients in whom sinus floor elevation was undertaken according to variables. Materials and Methods: It consisted of 96 patients(50 male and 46 female), ranging in age from 31 to 70 years(mean 49 years), who underwent sinus floor elevation procedure(94 implants in left side and 106 implants in right side) from 2001 to 2002. A total of 200 implants were placed in the grafted sinus(73 implants in lateral approach and 127 implants in crestal approach). All implants were restored by fixed prosthesis. All patients were healthy. Follow-up periods for implants were between 48 to 60 months. Results: The cumulative survival rate of implants was 91.5%. Gender, age and operation site did not have an influence on the survival rate. There was statistically significant differences for the implants which placed in less than 4 or 5 rom residual bone height, the survival rate was 60%, 81.4% respectively (p<0.05). There was no statistically significant difference of implants survival rate ac- cording to approach technique. The survival rate for 100% autogenous bone grafts was lower with respect to composite grafts containing autogenous bone and 100% substitutes. The survival rate for hydroxyapatite-coated implants was statistically significant lower than other textured group (p<0.05). Conclusion: Residual bone height, surface texture and graft materials have an influence on the survival rate. To use autogenous bone as a part of a composite bone replacement, implant texture which leads to more favorable implant-bone interface were necessary. To determine residual bone height for initial implant stability was important.

• Journal of Technologic Dentistry
• /
• v.44 no.3
• /
• pp.67-75
• /
• 2022

Purpose: This study aimed to comparatively evaluate the stress distribution of bones surrounding the implant system to which both titanium and polyetheretherketone (PEEK) abutments are applied using a three-dimensional finite element analysis. Methods: The three-dimensional implant system was designed by the computer-aided design program (CATIA; Dassault Systemes). The discretization process for setting nodes and elements was conducted using the HyperMesh program (Altair), after finishing the design of each structure for the customized abutment implant system. The results of the stress analysis were drawn from the Abaqus program (Dassault Systèmes). This study applied 200 N of vertical load and 100 N of oblique load to the occlusal surface of a mandibular first molar. Results: Under external load application, the PEEK-modeled dental implant showed the highest von Mises stress (VMS). The lowest VMS was observed in the Ti-modeled abutment screws. In all groups, the VMS was observed in the crestal regions or necks of implants. Conclusion: The bones surrounding the implant system to which the PEEK abutment was applied, such as the cortical and trabecular bones, showed stress distribution similar to that of the titanium implant system. This finding suggests that the difference in the abutment materials had no effect on the stress distribution of the bones surrounding implants. However, the PEEK abutments require mechanical and physical properties improved for clinical application, and the clinical application is thought to be limited.