• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1185-1191
• /
• 2014

가스터빈 블레이드는 증기터빈 블레이드와 달리 냉각홀 및 냉각유로를 포함한 복잡한 형상으로 되어 있으며 복합화력의 운전특성에 따라 반복적이거나 지속적인 열-기계 하중 조건 하에서 운전된다. 따라서 블레이드는 운전시간에 따라 균일하지 못한 온도 분포나 응력 분포를 보이며, 이는 크리프나 열-기계피로 손상을 유발하며, 결국 가스터빈 블레이드의 수명을 단축시킨다. 결국 다양한 운전 조건에 따라 발생하는 응력을 정확하게 계산하는 것은 설비의 신뢰성을 보장하고 나아가 블레이드와 같은 고온 부품의 정확한 수명을 평가하는데 무엇보다 중요하다. 최근 들어 컴퓨터 기능이 좋아지고 상용 소프트웨어의 성능이 향상되어 실증 시험에 대한 대안으로 유동, 열 및 구조해석을 연결하는 전산해석이 많이 사용되고 있다. 본 논문에서는 가스터빈 실 운전조건을 고려하여 유동-열-구조 해석 기법을 연계하는 유체-구조 연성해석을 통해 블레이드 온도 및 응력분포를 계산하였다. 또한 해석 결과를 토대로 대표적인 손상기구인 크리프 및 열-기계 피로 손상 모델을 이용하여 블레이드의 수명을 평가하였다.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.117-125
• /
• 1998

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. The volume free energy associated with Helmholtz free energy includes strain energies caused by applied stress and dislocations piled up in interface(DPI). The energy due to DPI is found by modifying the result of Dundurs and Mura[4]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(r) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius $r^*$ and incubation time $t^*$ to maximise Helmholtz free energy is found in present analysis. Also, kinetics of cavity formation are investigated using the results obtained by Riede [7]. The incubation time is defined in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that 1) strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius $r^*$ decreases or holds constant with increase of the time until the kinetic condition(eq. 2.3) is satisfied. there for the cavity may not grow right after it is formed, as postulated by Harris [15], and Ishida and Mclean [16], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f)and particle size on the incubation time are estimated using material constants of the copper as matrix.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.149-159
• /
• 2020

Cured-in-place-pipe(CIPP) is the most adopted trenchless application for sewer rehabilitation to extend the life of the existing sewer without compromising both direct construction and indirect social costs especially applied in the congested urban area. This technology is globally and domestically known to be the most suitable for partial and full deteriorated pipe structure rehabilitation in a sewer system. The typical design of CIPP requires a significant thickness of lining to support loading causing sewage flow interruption and increasing material cost. This paper presents development of a high strength glass fiber composite lining material for the CIPP application and structural test results. The test results exhibit that the new glass fiber composite lining material has 12 times of flexural strength, 6.2 times of flexural modulus, and 0.5 Creep Retention Factor. These test results can reduce lining design thickness 35% at minimum. Even though taking into consideration extra materials such as outer and inner films for actual field applications, the structural capacity of the composite material significantly increases and it reduces 20 percent or more line thickness as compared to the conventional CIPP. We expect that the newly developed CIPP lining material lowers material costs and minimizes flow capacity reduction, and fully replaceable to the conventional CIPP lining materials.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.39-49
• /
• 2018

The concrete bridge decks are usually precast and in-situ assembled with steel girders with post-pouring joint in the construction practice of super-wide steel-concrete composite beam. But the difference of concrete age between the precast slabs and the post-pouring joint has been not yet considered for the long-term performance analysis of this kind composite beam. A simply supported precast-assembled T-shaped beam was taken as an example to analyze the long-term performance of steel-concrete composite beam with post-pouring joint. Based on the deformation coordination conditions of the old-new concrete deck and steel girder, a theoretical model for the long-term behavior of precast-assembled composite beam is proposed in this paper according to age-adjusted effective modulus method. Then, the feasibility of the proposed model is verified by the available test data from the Gilbert's composite beams. Parametric studies were preformed to evaluate the influences of the cross-sectional area ratio of the post-pouring joint to the whole bridge deck, as well as the difference of concrete age between the precast slabs and the post-pouring joint, on the long-term performance of the composite beam. The results indicate that the traditional method without considering the age difference would seriously underestimate the effect of creep and shrinkage of concrete bridge decks. The concrete age difference between the precast slabs and the post-pouring joint should be demonstrated for the life cycle design and long-term performance analysis of precast-assembled steel-concrete composite beams.

• 열처리공학회지
• /
• 제35권3호
• /
• pp.121-129
• /
• 2022

Recently the growth of the renewable energy production has caused the flexible operation in LNG combined cycle power plant. Due to the rapid start and stop operations, large CrMoV castings used for turbine casings and valve bodies could be distorted and lead to replacement or welding repair. This study was performed to find out the characteristics of the repair welding for a damaged CrMoV casting steel. A typical field repair method (arc & TIG welding) was applied to making specimens. The degraded N2 packing head sample from the steam turbine was used. The evaluations of weldments were carried out in terms of microstructural characterization, microhardness measurements, tensile, creep-rupture and fatigue tests. Color etching was also applied for better understanding of welding microstructures. As the boundary between HAZ and base material was deteriorated by welding, it caused microstructural changes formed during PWHT and the shortening of the remaining residual life. By comparing the properties according to repair welding method, it was possible to derive what important welding factors were. As a result, arc welding method is more suitable for repair welding on CrMoV castings.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.134-139
• /
• 2007

This paper presents a computer-based analysis on the thermal shock characteristics of Pb-free solder joints and UBM in flip chip assemblies. Among four types of popular UBM systems, TiW/Cu system with 95.5Sn-3.9Ag-0.6Cu solder joints was chosen for simulation. A simple 3D finite element model was first created only including silicon die, mixture between underfill and solder joints, and substrate. The displacements due to CTE mismatch between silicon die and substrate was then obtained through FE analysis. Finally, the obtained displacements were applied as mechanical loads to the whole 2D FE model and the characteristics of flip chip assemblies were analyzed. In addition, based on the hyperbolic sine law, the accumulated creep strain of Pb-free solder joints was calculated to predict the fatigue life of flip chip assemblies under thermal shock environments. The proposed method for fatigue life prediction will be evaluated through the cross check of the test results in the future work.

• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.33-41
• /
• 2004

In ancient wooden structures, the mechanical properties of the structural members have been reduced by time-dependent degradations such as fatigue or creep. Also, the external and internal deterioration was caused by environmental condition, fungi, bacteria, or insect, and then reduced the quality of structural members. However, the previous methods for evaluating the deterioration have been mainly depended on the visual inspection. In this study, therefore, ultrasonic stress wave test, accelerometer stress wave test were used to evaluate the deterioration of structural wood members in ancient wooden structures. Based on the results, the quantitative criteria of stress wave transmitted velocity were proposed to evaluate the deterioration of structural member. The proposed criteria were related to the degree of deterioration. In accelerometer stress wave, the criteria of deterioration of wave reciprocal velocity was below 1800 ㎲/m at incipient deterioration (below 12% ratio of deterioration), between 1800 and 2200 ㎲/m at moderate deterioration (12~17%) and above 2200 ㎲/m at severe deterioration (above 17%). The ultrasonic stress wave, the criteria of deterioration were 800 and 950 ㎲/m at below 8% and above 15% of the degree of deterioration respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.8-9
• /
• 2002

액체로켓엔진의 연소기는 고온고압의 연소가스에 의해 벽면온도가 매우 높은 수준에 도달하기 때문에, 연소기가 열적으로 안정적으로 작동할 수 있는 메카니즘이 필요하게 되며, 따라서 이러한 방식의 하나로서 추진제를 이용한 재생냉각방식이 널리 사용되고 있다. 일반적으로 재생냉각형 연소기의 내벽은 열전도도가 우수한 구리 또는 구리합금 계열이 많이 사용되고 있다. 이러한 내벽 재질의 내구성은 주로 creep rupture, low cycle thermal fatigue, thermal-mechanical ratcheting에 의해 결정되는데, 사각형태의 냉각채널의 연소기에서는 thermal-mechanical ratcheting 특성이 수명 결정 주요 인자이다. Thermal-mechanical ratcheting은 그림 1과 같이 연소가스 영역과 냉각제 영역을 분리하는 벽면에서 국부적인 부풀음이 일어나면서 벽면두께가 감소하는 소성변형 형태로 나타나는데, 이러한 것을 Dog- house 형상이라 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.909-914
• /
• 2006

The goal of this study was to investigate the behavior of sows and their piglets reared using the non-all-in all-out system and the all-in all-out system during a 3-week lactation period. The 24 Landrace${\times}$Yorkshire sows (range of parity: 2 to 4) and their litters (range of litter size: 8 to 13 piglets) for each treatment (8 sows/replication) were used in this experiment. The sows were housed in farrowing crates ($0.6{\times}2.1m$) located in pens ($2.4{\times}1.8m$) with totally perforated metal flooring. The crates were kept in an experimental room that was thermostatically controlled to approximately $23^{\circ}C$. A 250-W infrared heat lamp was turned on above the creep area during lactation. The sows and piglets were conventionally managed. The animals were recorded during a 24-h period at 1, 4, 7, 14 and 21 days postpartum. The videotapes were scanned every minute to obtain an instantaneous behavioral sample. In the behaviors of sows, lateral recumbency decreased and ventral recumbency increased from 1 day postpartum to 21 days postpartum. In comparison to the AIAOS, sows in the NAIAOS spent much less time on lateral recumbency (p<0.01), whereas they spent much more time on ventral recumbency and sitting at 4 days postpartum (p<0.05 and p<0.05). In the behaviors of piglets, lying increased and unsuccessful suckling decreased until 21 days postpartum. Compared to the AIAOS at 4 days postpartum, piglets in the NAIAOS spent less time lying (p<0.01), whereas they spent much more time walking and unsuccessful suckling (p<0.01 and p<0.05). These results suggest that the all-in all-out system may be preferable to the non-all-in all-out system for promoting welfare.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.1-5
• /
• 2019

In the field of combined cycle power generation, thermal barrier coating(TBC) protects the super-heat-resistant alloy, which forms the core component of the gas turbine, from high temperature exposure. As the turbine inlet temperature(TIT) increases, TBC is more important and durability performance is also important when considering maintenance cost and safety. Therefore, studies have been made on the fabrication method of TBC and super-heat-resistant alloy in order to improve the performance of the TBC. In recent years, due to excellent properties such as high temperature creep resistance and high temperature strength, turbine blade material have been replaced by a single crystal superalloy, however there is a lack of research on TBC applied to single crystal superalloy. In this study, to understand the isothermal degradation performance of the TBC applied to the single crystal superalloy, isothermal exposure test was conducted at various temperature to derive the delamination life. The growth curve of thermally grown oxide(TGO) layer was predicted to evaluate the isothermal degradation performance. Also, microstructural analysis was performed by scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS) to determine the effect of mixed oxide formation on the delamination life.