• 제목/요약/키워드: Crash Location

검색결과 34건 처리시간 0.018초

자동차 교통사고 시 에어백에 의한 안면부 손상특성 (Facial Injury after Airbag Deployment in Occupant Motor Vehicle Accident)

  • 이희영;이강현;이정훈;성실;강찬영;김호중;김상철;윤영한
    • 자동차안전학회지
    • /
    • 제8권3호
    • /
    • pp.10-15
    • /
    • 2016
  • The purpose of this study is to evaluate the injury mechanism of facial injury related to an air-bag's deployment in occupant motor vehicle accident (MVA) by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 309 patients with agreement for an investigation, thirty five (11.3 %) were the severe who had ISS over 15. And also, sixteen (5.2%) derived from the reconstructed data (maximum collision energy, maximum acceleration, delta V) by PC-Crash. As a result, ISS including the facial injuries was affected by the condition. It was high when the number of crash extent, the safety belt was not fastened, and the seating position of occupant and the direction of collision is same. For accurate analysis of the relationship between occupant injury and vehicle damage in MVAs, build-up of an in-depth database through carrying out various policies for motor vehicle accidents is necessary for sure.

시뮬레이션을 이용한 교차로 신호위반 사고 해석 (Analysis of Intersection Signal Violation Accident Using Simulation)

  • 한창평
    • 한국산학기술학회논문지
    • /
    • 제22권1호
    • /
    • pp.424-430
    • /
    • 2021
  • 교통 신호 위반 사고는 운전자의 주장이 서로 상반되면 원인 규명이 어렵다. 본 연구에서는 사례를 중심으로 교통 사고 분석을 위해 사용하는 차량 충돌 해석 시뮬레이션 프로그램인 PC-CRASH을 이용하여 시뮬레이션을 수행하였고, 이를 통하여 교차로에서 신호 위반 차량을 규명하는 과정을 제시하였다. 첫째, 신호 위반의 원인 규명이 분명하지 않은 운전자나 목격자의 진술을 배제한다. 둘째, 사고 차량의 최종 자세, 최종위치, 파손 부위, 조향 여부, 제동 여부, 노면 흔적을 수집하고, 정지선으로부터 충돌지점까지 조사한다. 셋째, 사고 차량의 충돌 상황과 최종 정지 자세에 부합될 때까지 시뮬레이션 자료를 수정 입력한다. 넷째, 시뮬레이션 결과가 충돌 상황과 부합되면 운전자의 진술과 부합되는지 교차 검증하여 사실 규명을 입증한다. 본 연구의 시뮬레이션의 결과는 교차로 내 좌회전 신호에 렉서스는 약 55 km/h로 진입하였고 소나타는 교차로의 차량 직진 신호를 보고 72km/h로 교차로에 진입하여 렉서스와 충돌하였다. 그러므로 소나타의 신호위반으로 규명되고 소나타 운전자, 목격자, 경찰의 주장은 모순이다.

비용분석을 통한 교통사고 누적지역 선정방안 (Selection of Accident Frequency Area through Accident Cost Analysis)

  • 이정범
    • 한국ITS학회 논문지
    • /
    • 제21권2호
    • /
    • pp.33-43
    • /
    • 2022
  • 자동차의 증가에 따른 사고는 꾸준히 증가하고 있다. 교통사고로 인한 사망자수를 줄이기 위해 많은 안전정책이 추진되고 있으며 교통사고 사망자수를 제로로 만들기 위한 노력이 계속되고 있다. 2016년에 수립된 「제3차 교통안전기본계획」에 따르면 안전시설에 대한 개선사업은 누적사망자수가 가장 많은 지역을 우선으로 하도록 되어있다. 이는 시에서 관할하는 도로의 경우 어느 정도 합당한 방법이기는 하지만 구에서 관리하는 20m미만도로의 경우 사망자수가 기준치에 크게 미치지 못하는 현실에서 단순히 사망자수가 많은 지역을 위주로 개선방안을 내는 것은 합리적이지 않을 수 있다. 또한, 사망사고의 발생 원인이 특별한 안전시설이나 제도의 미비 때문인지 우연의 발생인지를 알아내기에는 사고건수가 상대적으로 미미하기 때문에 전체 사고를 기준으로 하는 것이 장래 더 많은 효과를 볼 수 있는 개연성이 있다. 본 연구는 사고비용을 토대로 사망사고 발생지역과 사고다발지역에 대한 비용분석을 통하여 이를 비교하였다. 3개의 산정방식을 이용한 사고비용 분석결과 모든 교통사고의 비용이 포함되었을 때에 사망자수가 없는 신촌네거리의 비용이 기존에 사고누적지역으로 채택된 시온보육원입구 삼거리의 비용보다 높게 나타나는 것으로 나타났다. 연구결과를 고려했을 때 교통사고 누적지점 선정 시 사고에 따른 비용, 사고 심각도에 대한 가중치 등을 고려하여 지점을 선정할 필요가 있다.

유한요소해석을 이용한 열간프레스성형 적용 로어 컨트롤 암의 성형품질 조건 최적화 (Optimization of Conditions of Forming Quality for Hot-press-formed Lower Control Arm Using Finite Element Analysis)

  • 손현성;최병근
    • 한국자동차공학회논문집
    • /
    • 제19권1호
    • /
    • pp.45-50
    • /
    • 2011
  • Hot-Press-Forming (HPF), an advanced sheet metal forming method using stamping at a high temperature of about $900^{\circ}C$ and quenching in an internally cooled die set, is one of the most successful forming process in producing crash-resistant parts such as pillars and bumpers with complex shape, ultrahigh strength, and minimum springback. To optimize conditions of a forming quality in HPF process and secure a safe product without any failures, such as fractures and wrinkling, the simulations based on the coupled thermo-mechanical analysis for a hot-press-formed lower control arm are applied with Taguchi's orthogonal array experiment. Three factor variables - the friction coefficient, blank shape, and hole location for burring - are selected to be optimized. The most effective condition of a forming quality for a hot-press-formed lower control arm is suggested. The simulation results are confirmed with experimental ones.

뒷좌석 승객 보호를 위한 안전띠의 기하학적 특성에 대한 연구 (A study of rear seat belts geometric characteristics for rear seated occupants protections)

  • 윤영한;박지양;이승상;김민용
    • 자동차안전학회지
    • /
    • 제7권1호
    • /
    • pp.45-50
    • /
    • 2015
  • The protection of frontal seat passengers in both driver and front seated occupant has been more focused from the auto industries as well as regulatory bodies more than 40 years. Recently, their interests have been extended to rear seat occupants especially children and female occupants. However, the current available safety devices for the rear seat occupants are seat belt only. According to the previous researchers, the injury level of the rear seat passengers tend to be higher than the injury level of the frontal seat passengers. In this study, the optimal location of seat belts anchorages to enhance rear passengers crashworthiness are studied. FEM models are designed in accordance with regulation of KMVSS102, UN R44, UN R16, and UN R14. and three point belts are fitted on the HybridIII 5th percentile dummy and HybridIII 50th percentile dummy. The combined injury value used HIC15, Nij, Chest deflection, Femur force are used to evaluate rear seat belt anchorage optimal locations.

다기능단속카메라 수집 자료를 활용한 과속운전 특성 분석 (Analysis of Speeding Characteristics Using Data from Red Light and Speed Enforcement Cameras)

  • 박정순;김중효;현철승;주두환
    • 대한교통학회지
    • /
    • 제34권1호
    • /
    • pp.29-42
    • /
    • 2016
  • 과속은 교통안전에 있어서 중요한 영향요인이며, 사고 심각도에 영향을 끼칠 뿐만 아니라 사고 위험성과 밀접한 관련성이 있다. 본 연구는 청주시의 신호교차로에 설치된 36개 다기능단속카메라(신호 및 과속)에서 수집한 27,968건의 속도위반 자료에 대한 분석 결과를 제시하고 있다. 이 자료에는 위반자의 3년간 위반이력을 포함한 다양한 인구통계학적 특성들을 포함하고 있다. 따라서 본 연구의 목적은 속도위반과 인적, 차량 및 도로 환경요인들 간의 관련성을 알아보기 위함으로 분석방법은 통계프로그램 SPSS 20의 기술통계와 이항로지스틱 회귀분석을 이용하였다. 주요 연구 결과는 다음과 같다. 첫째, 속도위반은 지방부와 도시외곽부 지역에서 많이 일어났다. 둘째, 속도위반 운전자의 약 25.6%는 제한속도 대비 20km/h 이상의 심각한 수준의 과속운전을 한다. 셋째, 과속운전자와 정상속도 운전자에 영향을 주는 변수로는 교차로의 공간적 위치와 운전자의 성별 및 연령이 선정되었다. 마지막으로, 이항 로지스틱 회귀분석에 의해 통계적으로 유의한 모형이 개발되었다(Hosmer and Lemeshow test : 11.586, p-value: 0.171).

정면충돌 시 차량 탑승자의 하지 손상기전에 대한 분석 (Analysis of Lower Extremity Injury Mechanism Centered on Frontal Collision in Occupant Motor Vehicle Crashes)

  • 이희영;이정훈;전혁진;김호중;김상철;윤영한;이강현
    • 자동차안전학회지
    • /
    • 제10권4호
    • /
    • pp.7-12
    • /
    • 2018
  • Injury mechanisms of lower extremity injuries in motor vehicle accidents are focused on fractures, sprains, and contusions. The purpose of this study is to evaluate the analysis of lower extremity injury mechanism in occupant motor vehicle accident by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 1,699 patients due to motor vehicle crashes, 88 (5.2%) received a diagnosis of lower extremity fracture and 141 (8.3%) were the severe who had ISS over 15. Nevertheless during 19 months for research, it was difficult to build up in-depth database about motor vehicle crashes. It has a limitation on collecting data because not only the system for constructing database about motor vehicle crash is not organized but also the process for demanding materials is not available due to prevention of personal information. For accurate analysis of the relationship between occupant injury and vehicle damage in motor vehicle crashes, build-up of an in-depth database through carrying out various policies for motor vehicle crashes is necessary for sure.

DEVELOPMENT OF FINITE ELEMENT HUMAN NECK MODEL FOR VEHICLE SAFETY SIMULATION

  • Lee, I.H.;Choi, H.Y.;Lee, J.H.;Han, D.C.
    • International Journal of Automotive Technology
    • /
    • 제5권1호
    • /
    • pp.33-46
    • /
    • 2004
  • A finite element model development of a 50th percentile male cervical spine is presented in this paper. The model consists of rigid, geometrically accurate vertebrae held together with deformable intervertibral disks, facet joints, and ligaments modeled as a series of nonlinear springs. These deformable structures were rigorously tuned, through failure, to mimic existing experimental data; first as functional unit characterizations at three cervical levels and then as a fully assembled c-spine using the experimental data from Duke University and other data in the NHTSA database. After obtaining satisfactory validation of the performance of the assembled ligamentous cervical spine against available experimental data, 22 cervical muscle pairs, representing the majority of the neck's musculature, were added to the model. Hill's muscle model was utilized to generate muscle forces within the assembled cervical model. The muscle activation level was assumed to be the same for all modeled muscles and the degree of activation was set to correctly predict available human volunteer experimental data from NBDL. The validated model is intended for use as a post processor of dummy measurement within the simulated injury monitor (SIMon) concept being developed by NHTSA where measured kinematics and kinetic data obtained from a dummy during a crash test will serve as the boundary conditions to "drive" the finite element model of the neck. The post-processor will then interrogate the model to determine whether any ligament have exceeded its known failure limit. The model will allow a direct assessment of potential injury, its degree and location thus eliminating the need for global correlates such as Nij.

검수고에서 소프트웨어 결함허용기법을 고려한 가상궤도회로의 적용에 대한 연구 (A Study on the Application of Virtual Track Circuit by Considering Software Fault Tolerance Techniques in Depot)

  • 이명철;고영환;김민석;이종우
    • 한국철도학회논문집
    • /
    • 제15권2호
    • /
    • pp.122-128
    • /
    • 2012
  • 차량기지 검수고에 구조를 고려하였을 시, 철제빔으로 인해 열차를 검지하기 위한 궤도회로를 설치하기가 어렵고, 레일과 대지가 철제빔으로 연결되어 누설전류가 많아지므로 궤도회로 시스템을 적용할 수 없다. 그러므로 열차가 검수고에 들어오면 수작업으로 차량이 있다는 표시를 하여 사용하고 있으며, 잘못 취급할 시에는 열차충돌 혹은 탈선으로 이어지는 사고가 발생할 수 있다. 본 논문에서는 검수고에서 소프트웨어 프로그램을 이용하여 가상궤도회로를 적용하였다. 가상궤도회로의 알고리즘을 제시하였으며, 열차가 점유된 검수고 방향으로 신호를 취급하는 경우에 검수고 열차점유 표시 및 신호기 정지신호 표시로 인해 검수고에서 열차의 안전성을 확보하였다. 또한 프로그램의 신뢰도 및 가용도를 분석하여 소프트웨어에 적합한 결함허용 기법을 적용하였다.

위치기반 UWB 센서를 이용한 선박 접안 유도시스템의 테스트베드 구현 (Implementation of Testbed of Guidance System for Docking of Ship Using Location Based UWB Sensor)

  • 신도성;이성로;오일환;정민아
    • 한국통신학회논문지
    • /
    • 제35권9B호
    • /
    • pp.1314-1321
    • /
    • 2010
  • 선박 접안 유도시스템은 선박 내에 장착된 위치 기반 UWB(Ultra WideBand)와 해안에 설치된 리더기를 통해 받은 접안 지점 내의 선박 정박 유무 정보를 바탕으로 관제시스템이 접안을 요청한 선박에 대해 선박의 크기와 종류를 판별하여 그 결과에 따라 접안이 가능한 지점의 위치 정보를 해당 선박에 무선 송출하여 선박의 접안을 유도한다. 이는 선박의 정박시간 대기로 발생하는 불필요한 연료의 낭비와 접안 과정 중 발생하는 충돌 사고를 예방하여 안전성을 제시할 수 있다. 본 연구에서는 위치기반 UWB를 이용한 선박 접안 유도시스템의 테스트베드를 구현하였다. 또한 java 기반의 사용자 인터페이스를 구현하여 모바일 기기 등을 통해 실시간으로 동종의 선박들 가운데에서 사용자의 선박의 위치를 쉽게 인지할 수 있도록 정박 위치 정보를 제공하는 편의성을 제공한다.