• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.479-489
• /
• 2019

The corrosion of reinforcement leads to a gradual decay of structural strength and durability. Several models for crack occurrence prediction and crack width propagation are investigated in this paper. Analytical and experimental models were used to predict the bond strength in the period of corrosion propagation. The manner of flexural strength loss is calculated by application of these models for different scenarios. As a new approach, the variation of the concrete beam neutral axis height has been evaluated, which shows a reduction in the neutral axis height for the scenarios without loss of bond. Alternatively, an increase of the neutral axis height was observed for the scenarios including bond and concrete section loss. The statistical properties of the parameters influencing the strength have been deliberated associated with obtaining the time-dependent bending strength during corrosion propagation, using Monte Carlo (MC) random sampling method. Results showed that the ultimate strain in concrete decreases significantly as a consequence of the bond strength reduction during the corrosion process, when the section reaches to its final limit. Therefore, such sections are likely to show brittle behavior.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.153-160
• /
• 2002

본 연구에서는 터널 내공변위 계측데이터를 이용한. 라이닝 구조물의 손상도 평가기법에 대하여 논의하였다. 이를 위하여 정적으로 획득되는 내공변위 데이터와 라이닝의 자중을 고려하여 라이닝내 발생가능한 손상의 위치 및 정도를 파악할 수 있는 일종의 역해석 기법을 도입하였다. 특히 라이닝 요소내 강성도를 일정수준 저감하는 모형 1과 분산형 균열모델을 응용한 모형 2 등 두 가지 방법을 고려하였고 각각의 장단점을 비교.분석하였다. 이상적인 터널라이닝 구조물을 가정하여 두 가지 모형에 대한 수치해석을 실시하였으며 계측데이터에 포함되는 노이즈의 영향을 함께 고려하였다. 이 결과, 모형 1의 경우, 노이즈의 영향은 상대적으로 미미하나 내공변위에 민감하게 작용하므로 현장적용시 주의가 요구되며 모형 2의 경우에는 노이즈에 민감하게 작용하는 반면 강성도의 저감량이 미소하여 실제 터널라이닝 구조물의 손상파악에 손쉽게 적용될 수 있음을 보였다.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.251-257
• /
• 2018

여름철 콘크리트는 수분증발에 의한 소성 및 건조수축균열, 슬럼프 저하, 콜드조인트 발생 등 다양한 문제가 발생한다. 이에 국내에서는 수분증발을 방지하고, 단열성능을 확보하기 위해 표면피복 양생을 위한 다양한 형태의 버블시트를 제작하여 사용하고 있으나, 여름철에는 적용사례가 없었다. 따라서 본 연구에서는 여름철 시공중인 아파트 현장에 1중의 투명, 백색 및 알루미늄 증착 버블시트와 PE필름 및 표면노출의 5가지 표면피복 양생재를 적용하여 콘크리트의 온도 및 균열특성 등 품질에 미치는 영향을 분석하였다. 실험결과 알루미늄 증착 버블시트가 온도저감, 균열저감 면에서 가장 뛰어난 것으로 나타났지만, 알루미늄 재질의 특성상 빛이 반사되어 시공자의 눈부심에 따른 시각공해가 발생하기 때문에 백색 버블시트의 사용이 가장 효과적인 것으로 밝혀졌다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.249-252
• /
• 2008

최근 대규모화된 건축 구조물에서 매스콘크리트 형식의 구조체가 많이 적용됨에 따라 수화열에 의한 온도균열의 발생이 가장 큰 문제점으로 대두되고 있다. 매스콘크리트의 온도균열은 타설 후 시멘트의 수화열에 의한 온도상승 및 강하에 따라 생기는 체적변화가 내부 또는 외부적으로 구속을 받아 발생하는 것으로, 이를 제어하기 위한 수화열 저감대책이 필요하다. 따라서 본 연구에서는 저발열배합 및 수화발열량차를 이용하여 분할타설된 매스콘크리트를 대상으로 양생조건에 따른 열전달계수 변화를 고려한 수화열 해석을 수행한다. 이를 위한 해석모델은 분할타설을 고려하여 상부층은 일반콘크리트를 타설하고 하부층은 저발열배합 콘크리트를 타설한다. 분할타설된 매스콘크리트는 외기노출 부분과 거푸집 부분, 양생조건부분이 다르기 때문에 그에 따른 대류경계조건을 설정한다. 이에 따라 저발열배합 및 분할타설, 열전달계수 변화 등을 고려한 수화열 해석결과를 통해 온도분포 및 응력분포를 확인하고, 온도균열저감효과를 분석한다.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.293-303
• /
• 2005

Bonded dissimilar materials are being increasingly used in automobiles, aircraft, rolling stocks, electronic devices and engineering structures. Bonded dissimilar materials have several material advantages over homogeneous materials such as high strength, high reliability, light weight and vibration reduction. Due to their increased use it is necessary to understand how these materials behave under stress conditions. One important area is the analysis of the stress intensity factors for interface cracks emanating from circular holes in bonded dissimilar materials. In this study, the bonded scarf joint is selected for analysis using a model which has comprehensive mixed-mode components. The stress intensity factors were determined by using the boundary element method (BEM) on the interface cracks. Variations of scarf angles and crack lengths emanating from a centered circular hole and an edged semicircular hole in the Al/Epoxy bonded scarf joints of dissimilar materials are computed. From these results, the stress intensity factor calculations are verified. In addition, the relationship between scarf angle variation and the effect by crack length and holes are discussed.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 춘계 학술논문발표회 논문집
• /
• pp.89-97
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theorectical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit. in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tenslie test.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.25-33
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theoretical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit, in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tensile test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.655-658
• /
• 2003

The crack of concrete structure plays an important role in the durability and safety of structure. Therefore, the features such as width, length, and direction of that must be measured periodically. The conventional method of measurement of cracks is manually sketched, however. it takes a fairly long time and lacks quantitative objectivity. This study proposes the algorithm to extract and analyze cracks automatically. The proposed algorithm is composed of two sub-algorithms. The extraction algorithm includes elimination of effect due to light, binarization. and noise reduction. The analysis algorithm includes thinning process, labeling, and calculation of crack width, length, and direction. The test to demonstrate the algorithm is fulfilled using the images of cracks on real concrete surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.192-197
• /
• 2001

To obtain $A_2$ experimentally in the $J-A_2$ theory, deformation field on the lateral surface of a CT specimen was to be determined using Laser speckle method. The crack growth was measured using direct current potential drop method and most procedure of experimental and data reduction was performed according to ASTM Standard E1737-96. Laser speckle images during crack propagation were monitored by two CCD cameras to cancel the effect of rotation and translation of the specimen. An algorithm to pursue displacement of a point from each image was developed and successfully used to measure $A_2$ continuously as the crack tip was propagated. The effects of specimen thickness on J-R curve and $A_2$ were explored.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.20-25
• /
• 2000

lh deleterious Cr, Mo rich -$\sigma$phase is a hard embrittling precipitate, which forms between MU)-900 $^{\circ}C$, often associated with a reduction in both impact properties and corrosion reshame. On this study, After aging at MU) "C, fatigue crack propagation induced by a phase precipitation was evaluated and time-frequency analysis of acoustic emission was conducted It was possible to find fracture mechanism by a phase precipitation due to time-frequency anulysis of acoustic emission signals.nals.