Browse > Article
http://dx.doi.org/10.12989/sem.2019.72.4.479

Sensitivity analysis of flexural strength of RC beams influenced by reinforcement corrosion  

Hosseini, Seyed A. (Faculty of Technology and Mining, Yasouj University)
Shabakhty, Naser (School of Civil Engineering, Iran university of Science and Technology)
Khankahdani, Fardin Azhdary (Department of civil engineering, Shiraz Branch, Islamic Azad University)
Publication Information
Structural Engineering and Mechanics / v.72, no.4, 2019 , pp. 479-489 More about this Journal
Abstract
The corrosion of reinforcement leads to a gradual decay of structural strength and durability. Several models for crack occurrence prediction and crack width propagation are investigated in this paper. Analytical and experimental models were used to predict the bond strength in the period of corrosion propagation. The manner of flexural strength loss is calculated by application of these models for different scenarios. As a new approach, the variation of the concrete beam neutral axis height has been evaluated, which shows a reduction in the neutral axis height for the scenarios without loss of bond. Alternatively, an increase of the neutral axis height was observed for the scenarios including bond and concrete section loss. The statistical properties of the parameters influencing the strength have been deliberated associated with obtaining the time-dependent bending strength during corrosion propagation, using Monte Carlo (MC) random sampling method. Results showed that the ultimate strain in concrete decreases significantly as a consequence of the bond strength reduction during the corrosion process, when the section reaches to its final limit. Therefore, such sections are likely to show brittle behavior.
Keywords
reinforcement corrosion; flexural strength; bond reduction; stochastic model;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Vu, K.A.T., Mullard, J.A. and Stewart, M.G. (2000), "Structural reliability of concrete bridges including improved chloride-induced corrosion models", Struct. Safety, 22(4), 313-333. https://doi.org/10.1016/S0167-4730(00)00018-7.   DOI
2 Yalsyn, H. and Ergun, M. (1996), "The prediction of corrosion rates of reinforcing steels in concrete", Cement Concrete Res., 26(10), 1593-1599. https://doi.org/10.1016/0008-8846(96)00139-1.   DOI
3 Zhang, R., Castel, A. and Francois, R. (2010), "Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process", Cem. Concr. Res., 40, 415-425. https://doi.org/10.1016/j.cemconres.2009.09.026.   DOI
4 Zhou, H., Liang, X., Wang, Z., Zhang, X. and Xing, F. (2017), "Bond deterioration of corroded steel in two different concrete mixes", Struct. Eng. Mech., 63(6), 725-734. https://doi.org/10.12989/sem.2017.63.6.725.   DOI
5 ACI 318 (2011), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
6 Al-Osta, M.A., Al-Sakkaf, H.A., Sharif, A.M., Ahmad, S. and Baluch, M.H. (2018), "Finite element modeling of corroded RC beams using cohesive surface bonding approach", Comput. Concrete, 22(2), 167-182. https://doi.org/10.12989/cac.2018.22.2.167.   DOI
7 Almusallam, A.A., Al-gahtani, A.S., Aziz, A.R. and Uzzafar, R. (1996), "Effect of reinforcement corrosion on bond strength" Construct. Build. Mater., 10 (2),123-129. https://doi.org/10.1016/0950-0618(95)00077-1.   DOI
8 Azad, A.K., Ahmad, S. and Azher, S.A. (2007), "Residual strength of corrosion-damaged reinforcement concrete beams", ACI Mater. J., 104(1), 40-47.
9 Bhargava, K., Ghosh, A.K., Mori, Y. and Ramanujam, S. (2007), "Corrosion-induced bond strength degradation in reinforced concrete-Analytical and empirical models", Nuclear Eng. Design, 237, 1140-1157. https://doi.org/10.1016/j.nucengdes.2007.01.010.   DOI
10 Capozucca, R. and Cerri, M.N. (2003), "Influence of reinforcement corrosion in the compressive zone on the behavior of RC beams", Eng. Struct., 25(13), 1575-1583. https://doi.org/10.1016/S0141-0296(03)00119-6.   DOI
11 Du, Y., Culle, M. and Li, C. (2013), "Structural effects of simultaneous loading and reinforcement corrosion on performance of concrete beams", Construct. Build. Mater., 39, 148-152. https://doi.org/10.1016/j.conbuildmat.2012.05.006.   DOI
12 Chung, L., Cho, S.H., Kim, J.H.J. and Yi, S.T. (2004), "Correction factor suggestion for ACI development length provisions based on flexural testing of RC slabs with various levels of corroded reinforcing bars", Eng. Struct., 26(8), 1013-1026. https://doi.org/10.1016/j.engstruct.2004.01.008.   DOI
13 Chung, L., Kim, J.J. and Yi, S. (2008), "Bond strength prediction for reinforcement concrete with highly corroded reinforcement bars", Cement Concrete Compos., 30, 603-611. https://doi.org/10.1016/j.cemconcomp.2008.03.006.   DOI
14 Chung, L., Najm, H. and Balaguru, P. (2008), "Flexural behavior of concrete slabs with corroded bars", Cement Concrete Compos., 30(3), 184-193. https://doi.org/10.1016/j.cemconcomp.2007.08.005.   DOI
15 Duprat, F. (2007), "Reliability of RC beams under chloride-ingress", Construct. Build. Mater., 21, 1605-1616. https://doi.org/10.1016/j.conbuildmat.2006.08.002.   DOI
16 DuraCrete (2000), "The European Union-Brite EuRam III, DuraCrete", Technical Report, Document BE95-1347/R172000.
17 Cabrera, J.G. (1996), "Deterioration of concrete due to reinforcement steel corrosion", Cem. Concr. Compos., 18(1), 47-59.   DOI
18 Enright, M.P and Frangopol, D.M. (1998), "Service-life prediction of deteriorating concrete structures", J. Struct. Eng., 124(3), 309-317. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(309).   DOI
19 Fang, C., Lundgren, K., Plos, M. and Gylltoft, K. (2006), "Bond behavior of corroded reinforcing steel bars in concrete", Cem. Concr. Res., 36(10), 1931-1938. https://doi.org/10.1016/j.cemconres.2006.05.008.   DOI
20 Enright, M.P. and Frangopol, D.M. (1998), "Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion", Eng. Struct., 20(11), 960-971. https://doi.org/10.1016/S0141-0296(97)00190-9.   DOI
21 Gonzales, J.A., Andrade, C., Alonso, C. and Feliu, S. (1995), "Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement", Cem. Concr. Res., 25(2), 257-264. https://doi.org/10.1016/0008-8846(95)00006-2.   DOI
22 Hosseini, S.A., Shabakhty, N. and Mahini, S.S. (2015), "Correlation between chloride-induced corrosion initiation and time to cover cracking in RC Structures", Struct. Eng. Mech., 56(2), 257-273. http://dx.doi.org/10.12989/sem.2015.56.2.257.   DOI
23 Jamali, A., Angst, U., Adey, B. and Elsener, B. (2013), "Modeling of corrosion-induced concrete cover cracking: A critical analysis", Construct. Build. Mater., 42, 225-237. https://doi.org/10.1016/j.conbuildmat.2013.01.019.   DOI
24 Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Division Proc. American Soc. Civil Eng., 97(ST7), 1969-199.
25 Khan, I., Francois, R. and Castel, A. (2014), "Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams", Cem. Concr. Res., 56, 84-96. https://doi.org/10.1016/j.cemconres.2013.11.006.   DOI
26 Lee, H.S., Noguchi, T. and Tomosawa, F. (2002), "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cem. Concr. Res., 32(8), 1313-1318. https://doi.org/10.1016/S0008-8846(02)00783-4.   DOI
27 Mori, Y. and Ellingwood, B.R. (1993), "Reliability-based service-life assessment of aging concrete structures", J. Struct. Eng., 119(5), 1600-1621. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:5(1600).   DOI
28 Liu, Y. and Weyers, R.E. (1998), "Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures", ACI Mater. J., 95(6), 675-681.
29 Malerba, P. G., Sgambi, L., Ielmini, D. and Gotti, G. (2017), "Influence of corrosive phenomena on bearing capacity of RC and PC beams", Adv. Concrete Construct., 5(2), 117-143. https://doi.org/10.12989/acc.2017.5.2.117.   DOI
30 Malumbela, G., Alexander, M. and Moyo, P. (2010), "Interaction between corrosion crack width and steel loss in RC beams corroded under load", Cement Concrete Res., 40(9), 1419-1428. https://doi.org/10.1016/j.cemconres.2010.03.010.   DOI
31 Rodriguez, J., Ortega, L., Casal, J. and Diez, J. (1996), "Corrosion of reinforcement and service life of concrete structures", Durability Build. Mater. Components, 1(1), 117-126.
32 Stanish, K., Hooton, R.D. and Pantazopoulou, S.J. (1999), "Corrosion effects on bond strength in reinforced concrete", ACI Struct. J., 96(6), 915-921.
33 Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cem. Concr. Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1.   DOI
34 Vidal, T., Castel, A. and Francois, R. (2007), "Corrosion process and structural performance of a 17 years old reinforced concrete beam stored in chloride environment", Cem. Concr. Res., 37(11), 1551-1561. https://doi.org/10.1016/j.cemconres.2007.08.004.   DOI
35 Vu, K.A.T, Stewart, M.G. and Mullard, J.A. (2005), "Corrosion-induced cracking: experimental data and predictive models", ACI Struct. J., 102(5), 719-726.