• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.103-106
• /
• 2002

We prepared $Co_{77}Cr_{20}Ta_{3}$ thin film with Facing Targets Sputtering Apparatus. which can deposit a high quality thin film CoCrTa magnetic layer for Perpendicular magnetic recording media. In order to obtain Good Crystal orientation of CoCrTa thin films. We prepared Thin Films on slide glass substrate. The thickness of Buffer-layer were varied from 10 to 50 nm and Magnetic layer thickness fixed 100[nm]. input current was varied from 0.2[A] to 0.5[A]. Substrate temperature was varied from room temperature to ${250^{\circ}C}$ respectively. The crystal orientation of the CoCrTa film were examined with XRD. Introduce Buffer-layer thin films showed improvement of dispersion angle of c-axis orientation (${\Delta\theta}_{50}$).

• 센서학회지
• /
• 제16권3호
• /
• pp.229-233
• /
• 2007

The indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. The ITO thin films deposited at room temperature because CR39 substrate its glass-transition temperature is $130^{\circ}C$. The ITO thin films used bottom and top electrode and for organic thin film transparent transistors (OTFTs). The ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300-800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of the ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300-800 nm) measured without post annealing process and a low resistivity value $9.83{\times}10^{-4}{\Omega}cm$ was measured thickness of 300 nm. All fabrication process of ITO thin films did not exceed $80^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.168-170
• /
• 2001

The NiCr is an important material for present thin-film resistor application owing to its low TCR and thermal stability. In this work, the NiCr thin films were deposited on corning glass substrate by reactive magnetron sputtering and the annealing at temperatures range from 300 to $500^{\circ}C$ for 20 min in vacuum. X-ray, AFM, $R_s$(surface leakage current) have been used to study the structural and electrical properties of the NiCr thin films. The high precision NiCr thin films resistor with TCR(temperature coefficient of resistance) of less then 10 ppm/$^{\circ}C$ was obtained under in in-situ annealing at $300^{\circ}C$ on Cr buffer layer substrate. It is clear that the NiCr thin-films resistor electrical properties are low TCR related with it's annealing and buffer layer condition. NiCr thin film resistor having a good thermal stability and low TCR properties are expected for the application to the dielectric material of passive component.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.81-84
• /
• 2004

The NiCr is an important material for present thin-film resistor application owing to its low TCR and thermal stability. In this work, the NiCr thin films were deposited on coming glass substrate by reactive magnetron sputtering and the annealing at temperatures range from 300 to $500^{\circ}C$ for 20 min in vacuum. X-ray, AFM, $R_s$(surface leakage current) have been used to study the structural and electrical properties of the NiCr thin films. The high precision NiCr thin films resistor with TCR(temperature coefficient of resistance) of less then $10\;ppm/^{\circ}C$ was obtained under in in-situ annealing at $300^{\circ}C$ on Cr buffer layer substrate. It is clear that the NiCr thin-films resistor electrical properties are low TCR related with it's annealing and buffer layer condition. NiCr thin film resistor having a good thermal stability and low TCR properties are expected for the application to the dielectric material of passive component.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.554-559
• /
• 2005

Ni/Cr thin film is very interesting material as thin film resistors, filaments, and humidity sensors because their relatively large resistivity, more resistant to oxidation and a low temperature coefficient of resistance (TCR). These interesting properties of Ni/Cr thin films are dependent upon the preparation conditions including the deposition environment and subsequent annealing treatments. Ni/Cr thin films of 250 nm were deposited by DC magnetron sputtering on $Al_2O_3/Si$ substrate with 2-inch Ni/Cr (80/20) alloy target at room temperature for 45 minutes. Annealing treatments were performed at $400^{\circ}C,\;500^{\circ}C,\;and\;600^{\circ}C$ for 6 hours in air or $H_2$ ambient, respectively. The clear crystal boundaries without crystal growth and the densification were accomplished when the pores were disappeared in air ambient. Most of surface was oxidic including NiO, $Ni_2O_3$ and $Cr_xO_y$(x=1,2, y=2,3) after annealing in air ambient. The crystal growth in $H_2$ ambient was formed and stabilized by combination with each other due to the suppression of oxidized substance on film surface. Most oxidic Ni was restored when the oxidic Cr was present due to its stability in high-temperature $H_2$ ambient.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.77-80
• /
• 2001

Crystallographic and magnetic characteristics of CoCr-based magnetic thin film for perpendicular magnetic recording media were influenced on preparing conditions. In these, there is that substrate temperature was parameter that increases perpendicular coercivity of CoCrTa magnetic layer using recording layer. While preparation of CoCr-based doublelayer, by optimizing substrate temperature, we expect to increase perpendicular anisotropy of CoCr magnetic layer and prepare ferromagnetic recording layer with a good quality by epitaxial growth. CoCrTa/Si doublelayer showed a good dispersion angle of c-axis orientation $\Delta\theta_{50}$ caused by inserting amorphous Si underlayer which prepared at underlayer substrate temperature 250C. Perpendicular coercivity was constant, in-plane coercivity was controlled a low value about 200Oe. This result implied that Si underlayer could restrain growth of initial layer of CoCrTa thin film, which showed bad magnetic properties effectively without participating magnetization patterns of magnetic layer. In case of CoCrTa/Si that prepared with ultra thin underlayer, crystalline orientation of CoCrTa was improved rather underlayer thickness 1nm, it was expected that amorphous Si layer played a important role in not only underlayer but also seed layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.913-917
• /
• 2003

In the electronic components and devices fabrication, thin film resistors with low TCR(temperature coefficient of resistance) and high precision have been used over 3 GHz microwave in recent years. Ni-Cr alloys thin films resistors is one of the most commonly used resistive materials because it has low TCR and highly stable resistance. In this work, we fabricated thin film resistors using Evanohm alloys target(72Ni-20Cr-3Al-4Mn-Si) of s-type with excellent resistors properties by RF-sputtering. Also we reported best deposited conditions of thin film resistors for microwave to observe microstructure and electronic properties of thin film according to deposited conditions(between target and substrate, power supply)

• 한국자기학회지
• /
• 제3권2호
• /
• pp.125-129
• /
• 1993

강자성 공명 실험을 사용하여 고주파 마그네트론 스파터링 방법으로 제작된 $Co_{79}Cr_{21}(at.%)$ 박막의 자기적 특성을 조사하였다. $Co_{79}Cr_{21}$ 박막은 $K=2.91{\times}10^{5}\;erg/cm^{3},\;H_{k}'=2526\;Oe,\;g=2.17$인 특성을 보이며, Q-band 강자성 공명 실험 결과와 토오크 실험결과는 서로 잘 일치함을 볼 수 있었다.

• Journal of Magnetics
• /
• 제4권2호
• /
• pp.69-72
• /
• 1999

Magnetic properties and crystallographic structure of e-beam evaporated Co/Cr and Co/Mo multilayer thin films were investigated using VSM and XRD. Co/Cr and Co/Mo multilayer thin films are confirmed as an alternating layered structure. The structure of films with thicker Co layers than Cr and Mo layers are found to be a hcp structure with the c-axis perpendicular to the film plane. The direction of the film plane is the easy magnetization one. There is a no significant difference in shape of hysteresis loops between Co/Cr and Co/Mo multilayer films. It is found that Mo layer is more effective than Cr for preparing Co layer with c-axis normal to the film plane.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.569-573
• /
• 2023

We utilized terahertz time-domain spectroscopy (THz-TDS) to measure the thickness and electrical properties of nickel-chromium (Ni-Cr) films. This technique not only aligns well with traditional methods, such as haze-meter and transmission-densitometer measurements, but it also reveals the electrical properties and thickness of films down to a few tens of nanometers. The complex conductivity of the Ni-Cr thin films was extracted using the Tinkham formula. The experimental values closely aligned with the Drude model, indicating the reliability of our Ni-Cr film's electrical and optical constants. The thickness of Ni-Cr was estimated using the complex conductivity. These findings emphasize the potential of THz-TDS in quality control of metallic nanofilms, pointing toward an efficient and nondestructive test (NDT) for such analyses.