• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.165-166
• /
• 2009

이 연구에서는 SUS304 기판과 Cr-Al-Si-N 코팅사이의 밀착특성을 향상시키기 위하여 하이브리드 증착법으로 Cr Interlayer를 기판위에 증착시킨 후 Cr-Al-Si-N 코팅을 증착하였다. 그리고 Ball-on-disk 마모테스트와 스크래치 테스트를 통해 밀착력, 파괴기구, 그리고 마찰거동 등을 살펴보았다. Cr-Al-Si-N 코팅에 60nm 두께의 Cr Interlayer 삽입되었을 때는 기판에 Cr-Al-Si-N 코팅만 증착되었을 때의 밀착력(${\sim}30N$) 보다 더 우수한 ${\sim}50N$의 밀착력을 나타내었고 내마모성 또한 향상되었다. 밀착력 증가는 Cr Interlayer 삽입에 따른 SUS304 기판과 Cr-Al-Si-N 코팅사이의 전단응력 감소에 기인한 것으로 사료된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.184-184
• /
• 1999

• Proceedings of the Korean Magnestics Society Conference
• /
• 1996.05a
• /
• pp.24-25
• /
• 1996

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.251-264
• /
• 2000

Organic removal from synthetic wastewater by electrochemical methods was investigated with various operating parameters, such as current density, retention time, electrode gap and $Cl^-/COD_{Cr}$ ratio. In electrolysis, dioxide iridium coated titanium ($IrO_2/Ti$) and stainless steel plate were used for anode and cathode respectively. The $COD_{Cr}$ removal efficiencies between plate type anode and net type anode were about same effect, but electrolytic power using net type anode is low than plate type anode. The $Cl^-/COD_{Cr}$ ratio was about $1.3kgCl^-/kgCOD_{Cr}$ when organic removal obtained 70 %, $Cl^-/COD_{Cr}$ ratio needs $2.2kgCl^-/kgCOD_{Cr}$ so as to organic completely remove. The removal efficiency of organics increased with current density, retention time and $Cl^-/COD_{Cr}$ ratio, but decreased with increasing electrode gap. The relationship of operating conditions and $COD_{Cr}$ removal efficiencies are as follows. $$COD_{Cr}(%)=80.0360(Current\;density)^{0.4451}{\times}(HRT)^{0.8102}{\times}(Gap)^{-0.4915}{\times}(Cl^-/COD_{Cr})^{0.5805}$$ There existed a competition between the removals for $COD_{Cr}$ and ammonium during electrolysis, the removal of ammonium was shown to be dominant and $COD_{Cr}$ removal was low. But $COD_{Cr}$ removal was raised as addition of alkalinity.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.127-131
• /
• 2011

In this paper, we study the electronic and magnetic properties of Cr substituted SiTe in the rock-salt structure compound using the full potential linearized augmented plane wave method within the generalized gradient approximation to the exchange correlation potential. Two stoichiometries are studied: $CrSi_3Te_4$ with 25 %, and $CrSiTe_2$ with 50 % Cr substitution. We found, from the total energy calculations, that the equilibrium lattice constant for cubic $CrSi_3Te_4$ is 11.64 a.u. and a = 7.89 a.u. and c = 11.13 a.u. for tetragonal $CrSiTe_2$. The integer value of the calculated magnetic moment per unit cell, $4{\mu}_B$ for $CrSiTe_2$ suggests that this compound is halfmetallic. The magnetic moment per unit cell for $CrSi_3Te_4$ is slightly larger than $4{\mu}_B$. The magnetic moment on Cr atoms are 3.61 and $3.62{\mu}_B$ in the $CrSi_3Te_4$ and $CrSiTe_2$, respectively. The presence of Cr atoms causes that the other atoms become slightly magnetized in both compounds. The electronic properties and the magnetism are discussed with the calculated spin-polarized density of states.

• Korean Journal of Food Science and Technology
• /
• v.46 no.4
• /
• pp.470-476
• /
• 2014

This study was performed to evaluate the quality characteristics and antioxidant activity of sikhe prepared using various concentrations of hot water extracts roasted coffee ground residue (CR-sikhe; 0.2, 0.4, 0.6, 0.8, and 1.0%). The pH increased with increasing CR concentration. The reducing sugar content after 5 h saccharification was the highest when 0.8% CR extract was used. Total polyphenol and flavonoid contents increased in a concentration-dependent manner reaching maximum levels when 1.0% CR-extract was used. The antioxidant activities of CR-extracts were higher than that of the control and increased dose-dependently. The CR-0.6 showed the best taste (4.28), color (4.56), flavor (4.08), and overall acceptability (4.28). After 10 day of storage at $4^{\circ}C$, the total cell count in CR-sikhe was approximately 1-2 log cycle, which was less than that in the control.

• PNF and Movement
• /
• v.16 no.2
• /
• pp.229-238
• /
• 2018

Purpose: This study aimed to compare the immediate effects of various contract-relax (CR) techniques on the peck force and passive range of motion (ROM) of knee extension. Methods: This study recruited 17 adult males and females who obtained below $90^{\circ}$ in straight leg raising. The subjects randomly performed one of three different CR techniques (direct CR, indirect CR, and modified CR) on the right knee extension four times per day for three days. The subjects' peck force during each CR and their passive knee extension on the hip at a $90^{\circ}$ flexed position before and after each CR were measured. Results: The peck force was significantly higher in the direct and modified CR than in the indirect CR. The ROM in the passive knee extension significantly increased after direct and indirect CR. Comparing between each CR, the passive knee extension range was significantly more improved in the direct and indirect CR than in the modified CR. Conclusion: Direct and indirect CR are more effective than modified CR in the ROM of passive knee extension. The study results suggest that the modified CR did not have the same effect on the ROM of the knee extension as the direct and indirect CR and that further research is needed to recruit more subjects and to determine the effects on different muscles after modified CR.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.126-135
• /
• 1997

$H_2/O_2$ 비에 따른 Hybrid HVOF 용사된 $Cr_3C_2$-7wt%(NiCr) 용사층의 특성 및 산화거동 This study was performed to investigate the influence of fuel/oxygen ratio (F/O=3.2, 3.0, 2.8) on the characteristics and the oxidation behavior of the hybrid-HVOF sprayed $Cr_3C_2$-7wt%NiCr coatings. Decomposition and the oxidation of the $Cr_3C_2$was occured during spraying. The degree of transformation from $Cr_3C_2$to $Cr_7C_3$ was increased with decreasing the F/O ratio. The microstructural differences of the as sprayed coating with F/O ratio can not be distinguished, However, large pores were diminished and then the coatings became dense by heat treatment. Microhardness of the as-sprayed specimen which sprayed with F/O=3.0 condition was hightest ($Hv_{300}$=1140) and the hardness was increased to 1500 after heat treatment at $600^{\circ}C$ for 50hrs in air. It was supposed that hardness was increased due to the formation of $Cr_2O_3$ within $Cr_3C_2$/$Cr_7C_3$matrix and the densification of coating layer during heat treatment. Apparent activation energy for oxidation was varied from 21.2 kcal$mol^{-1}K^{-1}$ to 23.8 kcal$mol^{-1}K^{-1}$ with respect to the F/O ratio. The surface morphology was changed to porous and oxide chusters were grown after oxidation $1000^{\circ}C$ for 50 hours by the aggressive evolution of gas phase ($CrO_3$ and$CO_2$). The oxide cluster was composed of Ni and Cr.

• Nuclear Engineering and Technology
• /
• v.6 no.4
• /
• pp.231-237
• /
• 1974

For detection and localization of leaks in closed vessels or pipes carrying liquid flow, $^{51}$ Cr-EDTA and $^{51}$ Cr-DTPA were synthesized and, the column and batch equilibrium experiments were carried out. In the column experiment, the recovery of $^{51}$ Cr-EDTA is 100% in quartz sand and 80.9% in steel sawdust, and that of $^{51}$ Cr-DTPA is 77.4% in quartz sand and 6.4% in steel sawdust. The recovery curve. $^{51}$ Cr-DTPA system in steel sawdust does not show a certain plateau, exceptionally. In general, $^{51}$ Cr-EDTA is adsorbed less than $^{51}$ Cr-DTPA. In the batch equilibrium experiment, the distribution coefficients (Kd) and effect of pH were investigated by using quartz sand, montmorillonite, steel sawdust, and mixed cement raw material as media. In general, the Kd values for $^{51}$ Cr-EDTA are lower than that of $^{51}$ Cr-DTPA. The Kd values for $^{51}$ Cr-EDTA are almost zero at pH 6.0, 7.0, and 8.0.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.205-211
• /
• 1997

The magnetic properties change which was induced by addition of small amount of Ni into Cr underlayer in CoCrTa/ CrNi thin film deposited by electron beam evaporator was investigated. The additional Ni element was found to be beneficial for incease in the coercivity of the thin film deposited at the room temperature. The origin of coercivity increase was elucidated by crystal orientation and microstructure investigation using XRD and AFM respectively. It was found that the grain size were increased by Ni addition. The coercivity of the film with CrNi underlayer is lower than that of film with Cr underlayer when prepared with higher substrate temperature. This result may be originated with the increase in grain size. When film was deposited at 280 $^{\circ}C$ substrate temperature, Cr segregation in grain boundary is found to be the other factor for determining coercivity value.